• Journal of the Semiconductor & Display Technology
• /
• v.4 no.4 s.13
• /
• pp.27-31
• /
• 2005

This article contains the development of FPC bonder that used for repair or trial product. Nowadays, in FPO module process (including PDP) accept the thermo-compress bonding method when attach FPC(Flexible Printed Circuit Board), TCP(Tape Carrier Package) and COF(Chip on the FPC) by ACF(Anisotropic Conductive Film). This system consists of ACF attachment part, pre-bonding part, main bonding part, loading / unloading part. This composition is a stand-alone system, not an in-line system. Hereafter, this composition should be developing into in-line system in all area of FPD industry.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.6 s.261
• /
• pp.522-530
• /
• 2007

The practical studies on the method of particle contamination control for yield enhancement in the cleanroom were carried out. The method of the contamination control was proposed, which are composed of data collection, data analysis, improvement action, verification, and implement control. The partition check method and the composition analysis for data collection and data analysis were respectively used in the main board and the cellular phone module production lines. And these methods were evaluated by the variation of yield loss between before and after improvement action. In case that the partition check method was applied, the critical process step was selected and yield loss reduction through improvement actions was observed. While in case that the composition analysis was applied, the critical sources were selected and yield loss reduction through improvement actions was also investigated. From these results, it is concluded that the partition check and the composition analysis are effective solutions for particle contamination control in the cleanroom production lines.

• Journal of Welding and Joining
• /
• v.17 no.3
• /
• pp.90-95
• /
• 1999

The increase in high speed, multi-function and high I/O pin semiconductor devices highly demands high pin count, very thin, and high density packages. BGA is one of the solutions, but the package has demerits in package reliability, surface mounting problems due to the PCB warpage and solder joint crack related with TCE mismatch between the materials. On this study to verify the thermal fatigue lifetime of the solder joint FEM and experiments were performed after surface mounting BGA with different solder composition and reliability conditions. FEM showed optimum composition of Ag3.2-Sn96.5 and under the composition minimum creep deformation of the solder joint was calculated, and the thermal fatigue lifetime was improved. In view of temperature cycle condition, the conditions of $-65^{\circ}C$to $150^{\circ}C$ showed minimum lifetime and t was 1/3 of $0^{\circ}C$ to $125^{\circ}C$ condition. Test board was prepared and solder joint crack was verified. Until 1000cycle on soder joint crack was observed.

• Journal of Engineering Education Research
• /
• v.6 no.2
• /
• pp.5-14
• /
• 2003

In this paper, we developed an efficient virtual experiment kit with creative and interactive multimedia contents, which can be used to enhance the quality of education in the area of digital logic circuits. Since our virtual experiment kit is implemented to describe the on-campus laboratory, the learners can obtain similar experimental data through it. Also, our web-based virtual experiment kit is designed to enhance the efficiency of both the learners and the educators. The learners will be able to achieve high learning standard and the educators save time and labor. The virtual experiment is performed according to the following procedure: (1) Circuit Composition on the Bread Board (2) Applying Input Voltage (3) Output Measurements (4) Checkout of Experiment Results. Furthermore, the circuit composition on the bread board and its corresponding online schematic diagram are displayed together on the virtual experiment kit for the learner's convenience. Finally, we have obtained several affirmative effects such as reducing the total experimental hours and the damage rate for experimental equipments and increasing learning efficiencies as well as faculty productivity.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.5
• /
• pp.559-563
• /
• 2011

Drop impact reliability assessment of solder joints on the flip chip is one of the critical issues for micro system packaging. Our previous researches have been showing that new solder ball compositions of Sn-3.0Ag-0.5Cu has better mechanical reliability than Sn-1.0Ag-0.5Cu. In this paper, dynamic reliability analysis using Finite Element Analysis (FEA) is carried out to assess the factors affecting flip chip in drop simulation. The design parameters are size and thickness of chip, and size, pitch and array of solder ball with composition of Sn1.0Ag0.5Cu. The board systems by JEDEC standard including 15 chips, solder balls and PCB are modeled with various design parameter combinations, and through these simulations, maximum yield stress and strain at each chip are shown at the solder balls. It is found that larger chip size, smaller chip array, smaller ball diameter, larger pitch, and larger chip thickness have bad effect on maximum yield stress and strain at solder ball of each chip.

• The Journal of Internal Korean Medicine
• /
• v.23 no.1
• /
• pp.65-71
• /
• 2002

Objective : We analyzed the published and contributed manuscripts of the journal of Oriental Internal Medicine in 2001. Methods : We analysed 120 manuscripts contributed to the editorial board of Journal of Oriental Internal Medicine from January to December 2001. Each manuscript was reviewed by three judges, was reviewed by two editors of the board and who took notes on the coding sheet. The variables of surveying were yes or no of acceptance, total scores, score of each 9 item, the number of writers and institutes, and languages. Statistical methods were used such as descriptive analysis, independent samples t test, ANOVA, multiple composition, multivariate logistic regression analysis. Results : THe odds ratio in vivo, in vitro study for clinical study were 5.15(95% CI 1.93-13.71), and case series or case-control study for case report were 3.78(95% CI, 1.28-11.19) Conclusions : Although in vivo, the in vitro study had more possibility of acceptance to publish than the clinical study, we should identify that these results are assuming high inter-reviewer reliability.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.1
• /
• pp.1-12
• /
• 2002

Ecophysiologically diapause represents a syndrome of physiological and biochemical characteristics, all of which ensure survival during a long period of dormancy. Since, silkworm enters diapause as embryo at the early embryonic stage, the duration of egg life depends on the duration of embryonic diapause. The nature of diapause in silkworm, Bombyx mori, is primarily determined by genetic characters and endocrinologicnl mechanisms, mediated by environmental factors such as temperature and photoperiod. Hibernating potency value besides nucleic acid and carbohydrate metabolism, production and utilization of sorbitol are also equally responsible for induction, initiation, determination, maintenance and termination of diapause. Embryonic diapause in Bombyx moir, induced by active secretion of sub-oesophageal ganglion is attributed to hormonal system and metabolic adjustment, which serves to bring about a new physiological state. Metabolic conversion of trehalose to glycogen at induction, glycogen to sorbitol at initiation and sorbitol to glycogen at termination of diapause is correlated and in each metabolic shift a key enzyme becomes active in response to hormonal and environmental stimulation. An attempt has been made in this review article to discuss briefly the nature of embryonic diapause, influence of various factors on diapause nature, hormonal mechanism of diapause besides biochemical composition of egg, nucleic acid and carbohydrate metabolism, production and utilization of sorbitol in relation to induction, determination, maintenance, initiation and termination of diapause in the silkworm, Bombyx mori.

• Journal of the Korean Institute of Rural Architecture
• /
• v.22 no.4
• /
• pp.71-78
• /
• 2020

Today, the whole world is going through a big chaos due to the COVID-19, but paradoxically, the emergence of COVID-19 has been leading to the need for sustainable development, such as Green New Deal that can improve global warming and carbon emissions, and the need for sustainable architecture is growing bigger and bigger in the architectural field as well. The level of CLT buildings in Korea is at a very rudimentary stage, while CLT buildings remedying existing wooden buildings are getting the spotlight among European countries for sustainable architecture. This study was conducted to categorize structure layer compositions of overseas CLT buildings and analyze architectural techniques and materials applied by collecting and analyzing information about CLT structure layer compositions of overseas CLT building-related institutions, companies and cases. When classifying structure layer compositions of foreign CLT buildings depending on the roles of layers. it was revealed that exterior wall structure layers were combined and organized within a sequence of external finishing, ventilation, waterproof, board, external insulation, airtightness, structure, airtightness, interior insulation, interior finishing, sloped roof structure layers were external finishing, ventilation, waterproof, board, external insulation, airtightness, structure, airtightness, interior insulation, interior finishing, flat roof structure layers were external finishing, ventilation, waterproof, planking wood, external insulation, waterproof, external insulation, airtightness, structure, airtightness, interior insulation, interior finishing.

• Journal of Animal Science and Technology
• /
• v.58 no.12
• /
• pp.42.1-42.8
• /
• 2016

Background: Deficiency of macro and micro-minerals in the ration of dairy cows adversely affects growth, milk production and reproduction efficiency. It is essential to examine mineral concentrations in feeds offered to dairy cows in practical farms. Methods: Two villages from each taluka were selected at random for taking representative samples of feeds, forages and hair. Within the village, help was sought from village milk producers and district animal husbandry officer for identification of 4 to 5 farmers and collection of representative samples. All the samples were processed and analyzed for chemical composition as well as major macro and micro-minerals, using Inductively Coupled Plasma-Optical Emission Spectrometer. Results: Ca content in wheat straw (0.29%), crushed maize (0.02%) and wheat bran (0.12%) was found to be below the critical level (0.30%). The P content in concentrate ingredients was high (0.26-0.96%), but low in dry roughages (0.06-0.12%). Cereal straws (0.14%) and grains (0.12%) were deficient in Mg. Feeds and forages were found to be adequate in K (1.50%). Cereals straws were found to be deficient in S (0.11%). Greens were good source of Cu (12.02 ppm). Wheat straw was found to be low in Zn (18 ppm), but high in Mn (225 ppm) and Fe (509 ppm). Local grasses and azolla green were found to be rich source of Co (>1.00 ppm). Se (0.63 ppm) was present in appreciable quantities in most of the feedstuffs. Conclusions: From the present study, it was apparent that the feeds and forages available in the state of Jharkhand may not meet the requirements for Ca, P, Mg, Cu, Zn and Co in order to sustain a milk production of ~10 kg/day. Therefore, it is necessary to supplement these deficient minerals through area specific mineral mixture in the ration of dairy cows for improving productivity and reproduction efficiency.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.3
• /
• pp.377-381
• /
• 1993

Twenty male crossbred ($Sahiwal{\times}HF$) calves of about 6-9 months of age were divided into four groups of five animals each. All the animals were offered wheat straw ad lib. As the basal feed. However, animals in group I were fed concentrate mixture while the animals in groups II, III and IV had free access to urea molasses mineral block (UMMB) lick (I), (II) and (III) respectively as a partial substitute of concentrate mixture. The average concentrate offered (kg/day) to the animals was significantly (p<0.01) higher in group I ($2.69{\pm}0.18$) compared to groups II ($1.76{\pm}0.15$), III ($1.70{\pm}0.06$) and IV ($1.65{\pm}0.12$). The UMMB lick consumed was non-significantly different amongst groups I ($535.40{\pm}38.14$), II ($525.60{\pm}31.82$), III ($551.00{\pm}38.49$) and IV ($548.80{\pm}45.46$). Except ether extract, the digestibility coefficients of CP, ADF and NDF were non-significantly different in different groups. Similarly, N balance (g/day) and percent N retention of intake was not affected in different groups on supplementation of UMMB lick. Body composition of animals was similar in different groups supplemented with either concentrate mixture or concentrate mixture and UMMB licks. It may be concluded from these studies that UMMB lick can partially replace the concentrate mixture in the diet of growing calves without affecting the growth rate, nutrient utilization and body composition. The UMMB lick, thus, can form a part of the ration economically in the diet of growing ruminants especially in developing countries.