A bandwidth-enhanced ultra-wide band (UWB) CMOS balun-LNA is implemented as a part of a software defined radio (SDR) receiver which supports multi-band and multi-standard. The proposed balun-LNA is composed of a single-to-differential converter, a differential-to-single voltage summer with inductive shunt peaking, a negative feedback network, and a differential output buffer with composite common-drain (CD) and common-source (CS) amplifiers. By feeding the single-ended output of the voltage summer to the input of the LNA through a feedback network, a wideband balun-LNA exploiting negative feedback is implemented. By adopting a source follower-based inductive shunt peaking, the proposed balun-LNA achieves a wider gain bandwidth. Two LNA design examples are presented to demonstrate the usefulness of the proposed approach. The LNA I adopts the CS amplifier with a common gate common source (CGCS) balun load as the S-to-D converter for high gain and low noise figure (NF) and the LNA II uses the differential amplifier with the ac-grounded second input terminal as the S-to-D converter for high second-order input-referred intercept point (IIP2). The 3 dB gain bandwidth of the proposed balun-LNA (LNA I) is above 5 GHz and the NF is below 4 dB from 100 MHz to 5 GHz. An average power gain of 18 dB and an IIP3 of -8 ~ -2 dBm are obtained. In simulation, IIP2 of the LNA II is at least 5 dB higher than that of the LNA I with same power consumption.
Nam Sang Yep;Ohm Woo Young;Lee Won Seok;Yi Sang Yeou1
Proceedings of the IEEK Conference
/
2004.08c
/
pp.717-722
/
2004
A design was done, and all characteristic of photodetectr of the web pattern type which a standard process of the Bipolar which Si PIN structure was used in this paper, and was used for the current amplifier design was used, and high-speed, was used as receiving optcal area of high altitude, and the module which had a low dark current characteristic was implemented with one chip with a base. Important area decreases an area of Ie at the time of this in order to consider an electrical characteristic and economy than the existing receiving IC, and performance of a product and confidence are got done in incense. First of all, the receiving IC which a spec, pattern of a wafer to he satisfied with the following electrical optical characteristic that produced receiving IC of 5V and structure are determined, and did one-chip is made. On the other hand, the time when AR layer of double is $Si_{3}N_{4}/SiO_{2}=1500/1800$ has an optical reflectivity of less than $10{\%}$ on an incidence optical wavelength of 660 ,and, in case of photo detector which reverse voltage made with 1.8V runs in 1.65V, an error about a change of thickness is very the thickness that can be improved surely. And, as for the optical current characteristic, about 5 times increases had the optical current with 274nA in 55nA when Pc was -27dBm. A BJT process is used, and receiving IC running electricity suitable for low voltage and an optical characteristic in minimum 1.8V with a base with two phases is made with one chip. IC of low voltage operates in 1.8V and 3.0V at the same time, and optical link receiving IC is going to be implemented
The Journal of Korean Institute of Communications and Information Sciences
/
v.34
no.12B
/
pp.1468-1474
/
2009
This paper shows an UHF RFID metallic tags using a Cavity structure for a long reading range. The reading range of a general passive tag is limited because the EIRP of a reader system is limited as 36㏈m by ISO 18000-6. To extend the reading range, the tag antenna should have a high gain antenna structure. The designed tag antenna is recognized over 10m range with a Cavity structure. The directivity pattern and the performance of the tag with the Cavity structure is stable when it is attached to a metallic object. The designed tag antenna has two kinds as cavity thickness. The sizes of designed tag antennas are $176\;{\times}\;52\;{\times}\;10\;mm$ and $176\;{\times}\;61\;{\times}\;30mm$ They can be attached to a large metallic materials and heavy equipments. The measured reading ranges of the tags are about 11m and 15m when they are attached to a metallic object.
Park, Ju-Hyun;Kim, Sung Jin;Lee, Joo Young;Park, Sang Hyeon;Lee, Ju Ri;Kim, Sang Yun;Kim, Hong Jin;Lee, Kang-Yoon
IEIE Transactions on Smart Processing and Computing
/
v.4
no.5
/
pp.371-378
/
2015
In this paper, a different type of pulse width modulation (PWM) control scheme for a buck converter is introduced. The proposed buck converter uses PWM with frequency hopping and a low quiescent.current low dropout (LDO) voltage regulator with a power supply rejection ratio enhancer to reduce high spurs, harmonics and output voltage ripples. The low quiescent.current LDO voltage regulator is not described in this paper. A three-bit binary-to-thermometer decoder scheme and voltage ripple controller (VRC) is implemented to achieve low voltage ripple less than 3mV to increase the efficiency of the buck converter. An internal clock that is synchronized to the internal switching frequency is used to set the hopping rate. A center frequency of 2.5MHz was chosen because of the bluetooth low energy (BLE) application. This proposed DC-DC buck converter is available for low-current noise-sensitive loads such as BLE and radio frequency loads in portable communications devices. Thus, a high-efficiency and low-voltage ripple is required. This results in a less than 2% drop in the regulator's efficiency, and a less than 3mV voltage ripple, with -26 dBm peak spur reduction operating in the buck converter.
The present study was performed to evaluate the relationship between the serotype or the genotype of Actnobacillus actinomycetemcomitans (A. a.) and the severity of periodontal disease. Total 64 A. a. clinical isolates were sampled from 46 sites of 20 subjects classified into the group I (1 periodontally healthy subject, 2 gingivitis patients, 5 ealry adult periodontitis patients), group II (3 moderatelly adult periodontitis patients) and group III (1 advanced adult periodontitis patient, 8 RPP patients). Southern bolt hybridization (fingerprinting) patterns of the five reference strains, A. a. strain ATCC 29523 (serotype a), ATCC 29522 (Serotype b), ATCC 43719 (serotype c), IDH 781 (serotype d) and IDH 1705 (serotype e), were used as the five basic genotypic patterns (A, B, C, D, E). NT type was designated as one which did dnot represent any of those five basic types. The serotypes were determined by ELISA technique with the serum samples from pre-immunized rabbit. Based on subject-based analysis, it was noted that genotypes A and C, NT, and B, D, E were significantly related to the disease groups I, II, and III, respectively. It was also noted that both the serotypes a and c were significantly related to the disease group I and II, while serotypes were significantly related bm), and serotypes b and nd were frequently found in sites with severe attachment loss (LA>6mm). The results indicated that the significant relationship can be delineated beteen the genotypes and the serotypes of Acinobacillus actinomycetemcomitans and the periodontal disease severity. The results also indicated that genotyping can provide more detailed information on its relationship with the disease severity based on both the patient-based and the site-based analyses.
Lee, Dae-Weon;Seo, Jong Bok;Kang, Jae Soon;Koh, Sang-Hyun;Lee, Si-Hyeock;Koh, Young Ho
The Plant Pathology Journal
/
v.28
no.4
/
pp.409-417
/
2012
We identified two novel expansin (EXP) genes in the expressed sequence tag database of Bursaphelenchus xylophilus, designated as Bx-EXPB2 and -EXPB3. Novel Bx-EXPBs encoded 150 amino acids and their similarities in coding sequence were 70.7-84.0% to the previously reported EXPB1 of B. xylophilus. Bx-EXPB2 and Bx-EXPB3 were clustered with Bx-EXPB1 and Bm-EXPB1, respectively, forming the independent phylogeny with other nematode EXPs. All identified Bx-EXPBs contained the signal peptide and were only expressed during the propagative stage, suggesting that they are secreted to facilitate nematode migration through hosts by loosening cell walls during infection. Quantitative real-time PCR analysis showed that the relative accumulation of Bx-EXPB3 mRNAs was the highest among the three Bx-EXPs examined and the order of mRNA accumulation was as follows: Bx-EXPB3 > Bx-EXPB2 >> Bx-EXPB1. Homology modeling of Bx-EXPBs showed that the structurally optimum template was EXLX1 protein of Bacillus subtilis, whichshared residues essential for catalytic activity with Bx-EXPB1 and Bx-EXPB2 except for Bx-EXPB3. Taken together, Bx-EXPB1 and Bx-EXPB2 may be involved migration through plant tissues and play a role in pathogenesis.
The purpose of this study was to detect quantitative trait loci (QTL) for growth and carcass quality traits on BTA6 in a population of Hanwoo cattle. Three hundred and sixty one steers were produced from 39 sires that were sired by 17 grandsires in the two Hanwoo farming branches of the National Livestock Research Institute of Korea, between Spring 2000 and Fall 2002. DNA samples were collected for all of the steers, sires and grandsires, and the phenotypes for six growth and carcass quality traits were measured at 24 months of age. Twelve microsatellite markers were chosen on BTA6 and a linkage map was constructed by using seven of the twelve markers. Then, a chromosome-wide QTL scan was performed by applying an Animal Model, in which effects of QTL alleles within the grand sires were fitted as a random term. Three QTL were detected at the 5% chromosome-wise level for backfat thickness, average daily gain, and final weight. The most likely positions for the QTL were in the proximal region, i.e. 0 cM, 35 cM, and 63 cM, respectively. Also, another QTL for longissimus dorsi muscle area was detected at the 10% chromosome-wise level at 67 cM. These results were, in general, consistent with our previous report, in which candidate gene analyses showed that a SNP near ILSTS035 flanked by BM4621 (62.5 cM) and BMS2460 (81.3 cM) was associated with final weight, carcass weight, average daily gain, and longissimus dorsi muscle area in the same Hanwoo population.
In this paper, we introduce the design and fabrication of V-band power amplifier MMIC with excellent gain-flatness for IEEE 802.15.3c WPAN system. The V-band power amplifier was designed using ETRI' $0.12{\mu}m$ PHEMT process. The PHEMT shows a peak transconductance ($G_{m,peak}$) of 500 mS/mm, a threshold voltage of -1.2 V, and a drain saturation current of 49 mA for 2 fingers and $100{\mu}m$ total gate width (2f100) at $V_{ds}$=2 V. The RF characteristics of the PHEMT show a cutoff frequency, $f_T$, of 97 GHz, and a maximum oscillation frequency, $f_{max}$, of 166 GHz. The gains of the each stages of the amplifier were modified to have broadband characteristics of input/output matching for first and fourth stages and get more gains of edge regions of operating frequency range for second and third stages in order to make the gain-flatness of the amplifier excellently for wide band. The performances of the fabricated 60 GHz power amplifier MMIC are operating frequency of $56.25{\sim}62.25\;GHz$, bandwidth of 6 GHz, small signal gain ($S_{21}$) of $16.5{\sim}17.2\;dB$, gain flatness of 0.7 dB, an input reflection coefficient ($S_{11}$) of $-16{\sim}-9\;dB$, output reflection coefficient ($S_{22}$) of $-16{\sim}-4\;dB$ and output power ($P_{out}$) of 13 dBm. The chip size of the amplifier MMIC was $3.7{\times}1.4mm^2$.
Soy-based formula has been used for centuries in Korea. Soybeans contain phytochemicals with a biochemically active component, isoflavone. Isoflavone is a kind of phytoestrogens, structurally and functionally similar to estrogen. This study was conducted to investigate the effects of soy-based infant formula on growth, development, and isoflavone concentration in the plasma and urine. Thirty-nine healthy infants who were delivered at K university medical center were recruited. Experimental groups were the breast milk group (n = 15, BM) who were fed breast milk, soy-based formula group (n = 10, SBF) who were fed soy-based infant formula, and the casein-based formula group (n = 14, CBF) who were fed casein-based infant formula for 4 months. HPLC analysis was used to measure the concentration of isoflavones. The measurements of infant weight, length, head circumference and chest circumference were all in the normal growth range and were similar among the experimental groups. No significant differences were found in the scores of total mean of infant development test (Development Quotient, DQ) among the experimental groups. The isoflavone content of soy-based formula was significantly higher than. that of breast milk and casein-based formula. Plasma concentration of daidzein and genistein in the infants fed soy-based formula (daidzein : 264.1 ng/ml, genistein : 392.1 ng/ml) was significantly higher (p<.0001) than that in infants fed breast milk (daidzein : 3.4 ng/ml, genistein : 3.8 ng/ml) and casein-based formula (daidzein: 8.1 ng/ml, genistein: 9.3 ng/ml). Also, urinary daidzein and genistein concentrations in infants fed soy-based formula (daidzein: 19.82 $\mu$g/ml, genistein : 17.89 $\mu$g/ml) were significantly higher (p<.001) than those in infants fed breast milk (daidzein: 0.28 $\mu$g/ml, genistein : 0.22 $\mu$g/ml) and casein-based formula (daidzein : 0.45 $\mu$g/ml, genistein : 0.33 $\mu$g/ml).
The Journal of Korean Institute of Electromagnetic Engineering and Science
/
v.19
no.9
/
pp.1000-1009
/
2008
The purpose of this paper is to analyze the performance of MB-OFDM UWB system when the interference signal that can be WIMAX signal or 4 G system signal is received by detection limit of -80 dBm/MHz proposed in Korea for DAA(Detect And Avoid) to permit UWB in $3.1{\sim}4.8$ GHz. MB-OFDM UWB system supports two transmission modes; one is TFI(Time frequency Interleaving) mode that transmits OFDM symbols using different carrier frequency from symbol to symbol according to Time Frequency(TF) codes, the other is FFI(Fixed Frequency Interleaving) mode that transmits OFDM symbols using a specific carrier frequency. In this paper, we considered the TX average power and the synchronization structure to reflect the effect of frequency hopping according to TFC. Interference analysis results show that the WiMAX system is fenced thoroughly from UWB interference in domestic DAA regulation, but the performance of MB-OFDM UWB system is degraded seriously by an interference signal with the DAA detection limit even in frequency Hopping mode that can get frequency diversity effect.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.