• 제목/요약/키워드: BmA3

검색결과 1,000건 처리시간 0.031초

Performance and Carcass Composition of Broilers under Heat Stress : I. The Effects of Dietary Energy and Protein

  • Al-Batshan, H.A.;Hussein, E.O.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제12권6호
    • /
    • pp.914-922
    • /
    • 1999
  • An experiment was conducted to determine the effects of dietary energy and protein on performance and carcass composition of broilers under heat stress during the growing period (3-6 weeks). A factorial arrangement of three levels of energy (3.0, 3.2 and 3.4 kcal/g), three levels of protein (18, 20 and 22%), an two rearing temperatures were used in this study. Groups of birds were kept under moderate temperature ($24{\pm}1^{\circ}C/24h$) or hot cycling temperature ($26-34^{\circ}C/6h$, $34{\pm}1^{\circ}C/12h$, and $34-26^{\circ}C/6h$). Body weight (BW), weight gain (WG), feed intake (FI), feed conversion (feed : gain) (FC), carcass weight (CW), carcass yield (YP), breast meat (BM), abdominal fat (AF), drumsticks (DS), and thighs (TH) percentages were determined at the end of the experiment. Hot cycling temperature significantly (p<0.05) decreased BW, WG, FI, CW, and BM, increased FC, YP, DS, and TH but did not affect AF. High energy significantly (p<0.05) increased BW, WG, CW, YP, AF, and TH, decreased FI and FC but did not affect BM or DS. This improvement was observed only under moderate temperature resulting in significant (p<0.05) energy by temperature interaction. High protein significantly (p<0.05) increased BW, WG, CW and BM, decreased AF but did not affect FI, FC, TP, DS, or TH. There were no significant protein by temperature interactions for any of the parameters tested except CW. It is concluded, under the conditions imposed in this experiment, that increasing dietary energy did not alleviate the depressing effect of heat stress while increasing dietary protein up to 22% improved the performance of broilers irrespective of rearing temperature.

Mapping Herbage Biomass on a Hill Pasture using a Digital Camera with an Unmanned Aerial Vehicle System

  • Lee, Hyowon;Lee, Hyo-Jin;Jung, Jong-Sung;Ko, Han-Jong
    • 한국초지조사료학회지
    • /
    • 제35권3호
    • /
    • pp.225-231
    • /
    • 2015
  • Improving current pasture productivity by precision management requires practical tools to collect site specific pasture biomass data. Recent developments in unmanned aerial vehicle (UAV) technology provide cost effective and real time applications for site specific data collection. For the mapping of herbage biomass (BM) on a hill pasture, we tested a UAV system with digital cameras (visible and near-infrared (NIR) camera). The field measurements were conducted on the grazing hill pasture at Hanwoo Improvement Office, Seosan City, Chungcheongnam-do Province, Korea on May 17 and June 27, 2014. Plant samples were obtained from 28 sites. A UAV system was used to obtain aerial photos from a height of approximately 50 m (approximately 30 cm spatial resolution). Normalized digital number (DN) values of Red and NIR channels were extracted from the aerial photos and a normalized differential vegetation index using DN ($NDVI_{dn}$) was calculated. The results show that the correlation coefficient between BM and $NDVI_{dn}$ was 0.88. For the precision management of hilly grazing pastures, UAV monitoring systems can be a quick and cost effective tool to obtain site-specific herbage BM data.

3차 혼변조 왜곡 특성이 우수한 K-band 상향변환기 설계 (The Design of K-band Up converter with the Excellent IMD3 Performance)

  • 정인기;이영철
    • 한국정보통신학회논문지
    • /
    • 제8권5호
    • /
    • pp.1120-1128
    • /
    • 2004
  • 본 논문에서는 우수한 OIP3(ouput intercept point) 특성을 가지는 평형전력증폭단을 설계하고 이를 적용하여 K-band 상향변환기를 설계 및 제작하였다. 상향변환기의 구성은 전력 증폭기단, 국부발진신호 제거필터, 주파수혼합기및 IF단으로 구성하였으며 RF 경로의 동작 유무를 판단하기 위한 국부 루프 경로와 출력 전력을 감시하기 위한 감시 단자로 구성하여 소요되는 전력을 예측하였다. K-대역 MMIC를 이용하여 평형전력증폭단을 제작하였으며 전력 예측값에 의하여 상향변환기를 설계 제작하였다. 설계된 상향변환기의 이득은 $40\pm$2dB, PldB는 29dBm의 특성을 가지며, OIP3는 37.25dBm의 높은 특성이 나타내었다. 특히 전력증폭단의 MMIC를 조정하여 30dB이상의 이득을 제어하였다. 본 논문에서 제작한 상향변환기는 PTP 및 PTMP용 트랜시버에 사용할 수 있으며, QAM 및 QPSK 변조방식을 이용하는 디지털 통신 시스템 및 BWA(Broad Wireless System)에도 적용할 수 있다.

A Fully Integrated 5-GHz CMOS Power Amplifier for IEEE 802.11a WLAN Applications

  • Baek, Sang-Hyun;Park, Chang-Kun;Hong, Song-Cheol
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제7권2호
    • /
    • pp.98-101
    • /
    • 2007
  • A fully integrated 5-GHz CMOS power amplifier for IEEE 802.11a WLAN applications is implemented using $0.18-{\mu}m$ CMOS technology. An on-chip transmission-line transformer is used for output matching network and voltage combining. Input balun, inter-stage matching components, output transmission line transformer and RF chokes are fully integrated in the designed amplifier so that no external components are required. The power amplifier occupies a total area of $1.7mm{\times}1.2mm$. At a 3.3-V supply voltage, the amplifier exhibits a 22.6-dBm output 1-dB compression point, 23.8-dBm saturated output power, 25-dB power gain. The measured power added efficiency (PAE) is 20.1 % at max. peak, 18.8% at P1dB. When 54 Mbps/64 QAM OFDM signal is applied, the PA delivers 12dBm of average power at the EVM of -25dB.

차량 감지용 FMCW 레이더의 단일 평형 다이오드 주파수 혼합기 설계 및 제작 (Design of a Single-Balanced Diode Mixer of FMCW Radar for Vehicle Detection)

  • 한석균
    • 한국전자파학회논문지
    • /
    • 제14권12호
    • /
    • pp.1335-1340
    • /
    • 2003
  • 본 논문에서는 쇼트키 장벽 빔 리드 다이오드와 180$^{\circ}$hybrid coupler를 이용하여 24 GHz 대역에서 동작하는 단일 평형 다이오드 주파수 혼합기를 설계 및 제작하였다. 근거리 차량의 거리와 속도 탐지용 호모다인 FMCW 레이더의 용도에 적합하도록 대역폭은 100MHz이내에서 작은 LO 구동 전력으로 IF 출력 주파수의 변환손실은 가능한 작고 평탄도는 일정하도록 그리고 LO 격리도가 가능한 크도록 하였다. LO 포트의 반사손실, LO 격리도, 변환손실 성능 특성간에 최적의 성능을 위하여 다이오드의 정합회로, 그리고 결합기와 정합회로 사이의 embedded 마이크로스트립 선로를 이용하여 최적화하였다. 제작된 혼합기는 6 dBm의 LO 구동 전력을 가지고 변환손실 6 dB, LO/RF 격리도 23 dB, P1 dB(input)는 3 dBm의 결과를 얻었다.

ZigBee 응용을 위한 900MHz CMOS RF 송.수신기 구현 (Implementation of a CMOS RF Transceiver for 900MHz ZigBee Applications)

  • 권재관;박강엽;최우영;오원석
    • 대한전자공학회논문지TC
    • /
    • 제43권11호
    • /
    • pp.175-184
    • /
    • 2006
  • 본 논문은 ZigBee 응용을 위한 900MHz ISM 밴드용 RF 송 수신기 설계에 관한 기술이다. 수신단은 저잡음 증폭기, 하향믹서, 프로그래머블 이득증폭기, 밴드패스필터로 구성되며, 송신단은 밴드패스필터, 프로그래머블 이득증폭기, 상향믹서, 구동증폭기로 구성된다. 송 수신단은 Low-IF 구조를 사용하였다. 또한, 송 수신단을 구성하는 각각의 블록은 저전력 기술을 사용하여 전체적인 전류 소모를 줄였다. Post-레이아웃 시뮬레이션으로 전체 송 수신기의 성능을 검증하였으며, 0.18um RF CMOS 공정을 이용하여 칩으로 구현하였다. 측정결과 제작된 칩셋은 -92dBm의 최소 수신 입력 레벨을 갖으며, 0dBm의 선형적인 최대 송신 출력 레벨을 갖는다. 또한, 전력 소모는 32mW(@1.8VDD)이며, ESD 방지 다이오드 패드를 포함한 칩 면적은 $2.3mm{\times}2.5mm$이다.

PCS 대역 송신용 CMOS RF/IF 단일 칩 설계 (Design of a CMOS Tx RF/IF Single Chip for PCS Band Applications)

  • 문요섭;권덕기;금거성;박종태;유종근
    • 전기전자학회논문지
    • /
    • 제7권2호
    • /
    • pp.236-244
    • /
    • 2003
  • 본 논문에서는 기존에 값비싼 BiCMOS 공정으로 주로 구현되던 이동통신 단말기용 RF단 및 IF단 회로들을 CMOS 회로로 설계하고, 최종적으로 PCS 대역 송신용 CMOS RF/IF 단일 칩을 설계하였다. 설계된 회로는 IF PLL 주파수합성기, IF Mixer, VGA등을 포함하는 IF 단과, SSB RF Mixer 블록과 구동 증폭기를 포함하는 RF 단으로 구성되며, 디지털 베이스밴드와 전력증폭기 사이에 필요한 모든 신호처리를 수행한다. 설계된 IF PLL 주파수합성기는 100kHz의 옵셋 주파수에서 -114dBc/Hz의 위상잡음 특성을 보이며, lock time은 $300{\mu}s$보다 작고, 3V 전원에서 약 5.3mA의 전류를 소모한다. IF Mixer 블록은 3.6dB의 변환이득과 -11.3dBm의 OIP3 특성을 보이며, 3V 전원에서 약 5.3mA의 전류를 소모한다. VGA는 모든 이득 설정시 3dB 주파수가 250MHz 보다 크며, 약 10mA의 전류를 소모한다. 설계된 RF단 회로는 14.93dB의 이득, 6.97dBm의 OIP3, 35dBc의 image 억압, 31dBc의 carrier 억압 등의 특성을 보이며, 약 63.4mA의 전류를 소모한다. 설계된 회로는 현재 $0.35{\mu}m$ CMOS 공정으로 IC 제작 중에 있다. 전체 칩의 면적은 $1.6㎜{\times}3.5㎜$이고 전류소모는 84mA이다.

  • PDF

The Design of SiGe HBT LNA for IMT-2000 Mobile Application

  • Lee, Jei-Young;Lee, Geun-Ho;Niu, Guofu;Cressler, John D.;Kim, J.H.;Lee, J.C.;Lee, B.;Kim, N.Y.
    • Journal of electromagnetic engineering and science
    • /
    • 제2권1호
    • /
    • pp.22-27
    • /
    • 2002
  • This paper describes a SiGe HBT low noise amplifier (LNA) design for IMT-2000 mobile applications. This LNA is optimized for linearity in consideration of the out-of-band-termination capacitance. This LNA yields a noise figure of 1.2 dB, 16 dB gain, an input return loss of 11 dB, and an output return loss of 14.3 dB over the desired frequency range (2.11-2.17 GHz). When the RF input power is -2i dBm, the input third order intercept point (IIP3) of 8.415 dBm and the output third order intercept point (OIP3) of 24.415 dBm are achieved.

Can bone marrow aspirate improve mandibular fracture repair in camels (Camelus dromedarius)? A preliminary study

  • Al-Sobayil, Fahd;Sadan, Madeh A.;El-Shafaey, El-Sayed;Ahmed, Ahmed F.
    • Journal of Veterinary Science
    • /
    • 제21권6호
    • /
    • pp.90.1-90.11
    • /
    • 2020
  • Background: Mandibular fractures are common in camels, leading to considerable economic losses. This study explored methods of improving mandibular fractures repair, adjuvant with interdental wire, or bone plate fixation. Autologous bone marrow (BM) injection enhances osteogenesis and rapid healing. Objectives: To investigate the effect of autologous BM aspirate as an adjuvant treatment for repairing mandibular fractures in camels with interdental wire, or bone plate fixation. Methods: Thirty dromedary camels aged 5-8 years and of both sexes were randomly divided into 4 treatment groups: group 1 (n = 10) treated with stainless steel wire fixation and BM injection at the fracture line, group 2 (n = 10) treated with plate fixation and BM injection at the fracture line, group 3 (n = 5) treated with stainless steel bone wire fixation and placebo saline injection at the fracture line, and group 4 (n = 5) treated with plate fixation and placebo injection at the fracture line. The mandibular fractures were followed weekly for 12 weeks postoperatively to assess improvement and healing based on clinical evaluation, radiographic union scale, and bone turnover markers (i.e., bone alkaline phosphatase, osteocalcin, pyridinoline, and deoxypyridinoline). Results: Compared to other groups, elevated bone turnover markers in group 1 were demonstrated (p < 0.05) on the seventh postoperative day. Likewise, compared to other groups, both clinical findings and radiographic union scale significantly improved (p < 0.05) in group 1 on the 56th postoperative day. Conclusions: BM aspirate has a promising beneficial osteogenic effect on mandibular fracture repair in camels, most notably when combined with interdental wire fixation.

Effects of Planting Dates and Mulch Types on the Growth, Yield and Chemical Properties of Waxy Corn Crosses $Sonjajang{\times}KNU-7$ and $Asan{\times}KNU-7$

  • Souvandouane, Souliya;Esguerra, Manuel;Heo, Kyu-Hong;Rico, Cyren M.;Lee, Sang-Chul
    • 한국작물학회지
    • /
    • 제55권2호
    • /
    • pp.91-97
    • /
    • 2010
  • The growth, yield and chemical properties of waxy corn $Sonjajang{\times}KNU-7$ and $Asan{\times}KNU-7$ planted in different dates and mulch types in a converted paddy field was investigated. Experiment was carried out in a randomized complete block design in a split split-plot arrangement with four replications. Planting dates (D) [May 16 (D1, early), June 1 (D2, middle), June 6 (D3, late)] represented main plots, plastic mulch (M) [(BM, black mulch; TM, transparent mulch)] for subplots while waxy corn crosses [$Sonjajang{\times}KNU-7$ (‘Sonja’) and $Asan{\times}KNU-7$ (‘Asan’)] for sub-subplots. Results showed that D had a significant effect on growth characters except emergence, ear quality except ear diameter, and yield whereas M showed significant effect on growth characters only. Superior growth and ear quality performance were recorded in D1 and BM. In terms of crosses, ‘Sonja’ had better growth performance than ‘Asan’ regardless of D and M, but performed better at D1 and BM. Highest yield was obtained in D1 for BM (2,131 kg $10a^{-1}$) and TM (1,655 kg $10a^{-1}$) but no significant difference in the yield across V was recorded. In terms of starch and sugar contents, a decreasing trend was observed from D1 to D3 regardless of M and V.