• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.268-270
• /
• 2001

현재 ad hoc의 연구 방향은 무천 기반의 패킷 라우팅에 관련된 것이 대부뿐 이러 네트워크 토폴로지 생성에 대한 연구는 거의 진행된 것이 없다. 현재 대부분의 ad hoc 네트워크는 대표적인 싱글 채널 방식인 broadcast 기반의 무선 미디어 방식을 물리적 계층을 사용하며, 이를 기반으로 이동 노드의 무선 범위 제한을 극복하기 위한 형태로 네트워크 토폴로지를 형성한다. 블루투스(B1uetooth)는 frequency hopping(FH) 방식을 사용하므로 연결 설정 과정에서 동기화 과정이 반드시 요구되며, ad hoc 네트워크을 형성을 위해 다중 채널을 사용한다. 따라서 블루투스와 같이 다중 채널을 물리적 계층으로 사용하는 네트워크에서는 싱글 채널 방식과 달리 명시적으로 토폴로지를 형성하기 위한 메커니즘이 요구된다. 본 논문에서는 다중 채널과 블루투스가 탑재된 노드의 이질적 특성을 고려한 스캐터넷(Scatternet) 구성 메커니즘을 제안한다. 본 메커니즘은 칵 노드의 전력 상태와 이동성 정보를 바탕으로 스캐터넷의 마스터와 브리지 노드틀 선택 함으로서 효율적인 네트워크 토플로지를 구성한다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.10a
• /
• pp.345-348
• /
• 2004

Every bridge node participating in multiple piconets and forming a scatternet should schedule the inter-piconet traffics in an efficient manner. Frequent piconet switching due to short polling intervals for the links of a bridge node leads to considerable time slots loss caused by the guard time and power consumption for transceiving and processing. On the other hand, restrained piconet switching may result in failures of fulfilling QoS (Quality of Service) requirements for some links. Tn this paper, we present a QoS aware inter-piconet scheduling scheme minimizing the piconet switching events within guaranteed QoS requirements. According to simulation results, the proposed scheme is confirmed to have great improvement in throughput and number of switching events over the credit scheme as current inter-piconet scheduling scheme for the scatter mode.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.941-944
• /
• 2003

This paper implement Telemetry System which is used Bluetooth. This System propose system which can detect a total amount of gas, electricity or water without a motorman, at home. BlueTooth is a close range wireless communication technology which uses a wireless frequency 2.4GHz and has a high trust and self - error correction technology according to a low power consumption quality and a high-speed frequency hopping. This makes get a high trust concerning a data transmission than an existing modem. In addition, though wireless modem is restricted by a minimal of a wireless terminal, it will be possible to coincide with the function of the portable with the low power consumption quality by using Bluetooth. And as the system on a chip of module progresses, the possibility of the snail size is present. And, Motorman who use mobility of embedded system can detect detect a total amount of gas, electricity or water outdoor. Embedded system use ARM processor that is low power processor. So it ran use long time efficiently.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.173-178
• /
• 2010

In this paper, we analyze the performance of multilink Bluetooth service and design the multilink application between various Bluetooth devices. There are many restrictions for the Bluetooth based multilink services. Especially, these restrictions occur due to SCO and ACL which construct logical links. In forming ake a scatternet, only one SCO link can be utilized. Also, the number of ACL link depends on the number of RFCOMM channels. High quality audio data streaming cannot be supported by using SCO link. In that case, ACL link should be used for the audio streaming and the data rate of other data links decreases. We implemented the multilink services to verify the considerations for the multilink service.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.281-287
• /
• 2007

The Bluetooth technology represents an attractive approach to enable short distance wireless connectivity. The Bluetooth standard operates at the 2.4 GHz ISM band and offers the advantage of establishing ad hoc networks, called piconet and scatternet. The spread of Bluetooth implementation in consumer products opens up a new short range wireless networking applications. Bluetooth MAC avoids packet collision within a piconet by simple time multiplexing. But lack of synchronization among independent neighboring piconets introduces packet overlapping within a time slot. In this paper, the wireless network throughput of Bluetooth packet transmission system applying the pure-ALOHA and slotted-ALOHA MAC is investigated according to the impact of channel environment. From the obtained results, the throughput of the Bluetooth MAC protocol shown to offer good performance in wireless channel, and the results are useful for the implementation of Bluetooth networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.417-422
• /
• 2003

Ad Hoc network not only can be the constitution of multiple piconet, but also can be the extension to the scatternet. By changing the length of the packets, it will transmit packets according to the amount of the transmission. There are two forms of the bluetooth. The one is the DM which is slower in speed but higher in reliance than the DH. The other is the DH which is faster in speed but lower in reliance than the DM. This paper tries to compare and analyze the performances of mobile hosts according to the forms of the packets in bluetooth Ad Hoc network.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1608-1615
• /
• 2010

In this paper, we proposed the method called "DoublePico"(Double Piconet) forovercoming low data transmission rate in a scatternet. This needs a new Ad-hoc network topology to transmit with high rate. Every node performs the function of the relay station. DoublePico has two bluetooth devices that should form two different poconets; every node can make a link between two different piconets. Two different piconets are linked in one node by the link with two bluetooth divices thereby forming the Ad-Hoc network. In this paper, we shows the method of DoublePico which supports about 457kbps of the maximum data transmission rate. This method supports a higher data transmission rate than the traditional bluetooth's Ad-Hoc topology by using analysis and comparison of existing algorithm of bluetooth specification and simulation results. Specifically, this paper focuses on the impact of intererence on the PER (Packet Error Rate), throughput performance, and the throughput improvement with SAW(Stop and Wait)-ARQ scheme in DoublePico.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.5
• /
• pp.13-24
• /
• 2005

Due to the changes in the wireless information environment, there has been an increased demand for various types of information. Accordingly, many wireless communication technologies have been studied and developed. In particular, studies on ubiquitous communications are well underway. Lately, the focus has been on the Bluetooth technology due to its applicability in various environments. Applying Bluetooth connectivity to new environments such as ubiquitous or sensor networks requires finding new wars of using it. Thus, this research analyzed the vulnerability on the limited number of slaves in a piconet configuration through the current Bluetooth communication and proposed an expanded Bluetooth piconet formation method, regardless of the number of slaves inside the piconet even if it is not configured in a scatternet. In the proposed method, we applied a security service and resolved the vulnerabilities of the current piconet by configuring an expanded form of the current tree-shaped structure.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11b
• /
• pp.1411-1414
• /
• 2002

블루투스는 본래 이동전화 핸드셋, 헤드셋, 그리고 휴대형 컴퓨터와 같은 장치를 연결하는 케이블을 제거하기 위해 개발된 것으로 저가, 저 전력, 단거리의 무선 기술이다. 그러나 전자 제품간에 표준화된 무선 통신이 가능하게 됨으로 인하여 블루투스는 휴대전화나 PDA, 노트북 PC 와 같은 모바일 기기에 부착되어 무선 ad-hoc 네트워크를 구성할 수 있게 되었다. 블루투스는 시분할 다중화 시스템(TDM) 방식으로 최대 8 개의 블루투스 기기가 모여 하나의 채널을 공유하는 '피코넷(piconet)' 을 형성할 수 있고 여러 개의 피코넷을 연결하여 '스캐터넷(scatternet)' 이라는 더 큰 네트워크를 구성할 수 있다. 이러한 블루투스 네트워크에서 기존의 브로드캐스트 서비스는 단순한 재전송 방식으로 인해 신뢰성과 효율성에 있어서 많은 문제점을 안고 있으며 블루투스의 특징을 고려하지 못하고 있다. 따라서 본 논문에서는 블루투스 네트워크에서 브로드캐스트 패킷의 수신을 보장하면서 대역폭을 효율적으로 사용하는 브로드캐스트 패킷 전송 기법을 제시하고자 한다.