• 한국재료학회지
• /
• 제20권6호
• /
• pp.294-300
• /
• 2010

In this study, we fabricated a polymer light emitting diode (PLED) and investigated its electrical and optical characteristics in order to examine the effects of the PFO [poly(9,9-dioctylfluorene-2-7-diyl) end capped with N,N-bis(4-methylphenyl)-4-aniline] concentrations in the emission layer (EML). The PFO polymer was dissolved in toluene ranging from 0.2 to 1.2 wt%, and then spin-coated. To verify the influence of the TPBI [2,2',2"-(1,3,5-Benzinetriyl)-tris(1-phenyl-1-H-benzimidazole)]electron transport layer, TPBI small molecules were deposited by thermal evaporation. The current density, luminance, wavelength and current efficiency characteristics of the prepared PLED devices with and without TPBI layer at various PFO concentrations were measured and compared. The luminance and current efficiency of the PLED devices without TPBI layer were increased, from 117 to $553\;cd/m^2$ and from 0.015 to 0.110 cd/A, as the PFO concentration increased from 0.2 to 1.0 wt%. For the PLED devices with TPBI layer, the luminance and current efficiency were $1724\;cd/m^2$ and 0.501 cd/A at 1.0 wt% PFO concentration. The CIE color coordinators of the PLED device with TPBI layer at 1.0 wt% PFO concentration showed a more pure blue color compared with the one without TPBI, and the CIE values varied from (x, y) = (0.21, 0.23) to (x, y) = (0.16, 0.11).

• 폴리머
• /
• 제37권6호
• /
• pp.736-743
• /
• 2013

공액구조 고분자의 밴드갭을 줄이기 위하여 청색의 디페닐렌비닐렌을 치환기를 갖는 카바졸 단량체와 용해도 향상을 위해 옥틸기를 도입한 카바졸 공단량체를 합성하여 신규 공중합체를 제조하였다. Suzuki 커플링 중합으로 공중합체를 제조하고, 공중합체의 열적, 분광학적, 전기광학적 특성을 조사하여 고분자 유기발광 다이오드(PLED)의 발광층에의 사용가능성을 조사하였다. 용액상태에서 공중합체의 UV 최대 흡수 파장은 333~340 nm, PL 최대방출 파장은 409~464 nm를 보였으며, 상대양자효율은 최대 25.8%의 값을 보였다. 열중량분석 결과 $350^{\circ}C$까지 열안정성을 보이고, 필름형성이 용이하였으며, 공중합체를 발광층으로 사용한 PLED 소자에서 4.0 V에서 청색광을 나타내었다.

• 한국재료학회지
• /
• 제19권6호
• /
• pp.313-318
• /
• 2009

Polymer Light Emitting Diodes (PLEDs) with an ITO/PEDOT:PSS/PVK/PFO-poss/LiF/Al structure were prepared on plasma-treated ITO/glass substrates using spin-coating and thermal evaporation methods. The annealing effects of the PFO-poss film when it acts as the emission layer were investigated by using electrical and optical property measurements. The annealing conditions of the PFO-poss emission film were 100 and $200^{\circ}C$ for 1, 2 and 3 hours, respectively. The luminance increased and the turn-on voltage decreased when the annealing temperature and treatment time increased. After examining the Luminance-Voltage (L-V) properties of the PLED, the maximum luminance was found to be 1497 cd/$m^2$ at 11 V for the device when it was annealed at $200^{\circ}C$ for 3 hours. The peak intensity of the PLED emission spectra at approximately 525 nm in wavelength increased when the annealing temperature and time of the PFO-poss film increased. These results suggest that the light emission color shifted from blue to green.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1461-1463
• /
• 2007

In this study, we report the luminescent properties of white polymer light emitting diode (WPLED) fabricated by soluble methods with poly-fluorenebased polymers blends which emit blue and yellow light. A device structure of ITO/PEDOT:PSS/Emissive Layer (EML)/Al was employed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.648-650
• /
• 2007

We demonstrate highly efficient White Polymer Electrophosphorescent Light-emitting Diode using newly developed green and red light emitting heteroleptic iridium complex, Ir-(pq)2tpy, and blue light emitting fluorescent dopant, BczVBi. The best luminous efficiency reached 28cd/A with maximum luminance of 87000cd/m2. The scheme for determining optimum device architecture and dopant concentrations were constructed.

• 마이크로전자및패키징학회지
• /
• 제13권4호
• /
• pp.51-56
• /
• 2006

ITO(Indium tin oxide)glass 기판 위에 PEDOT:PSS[poly(3,4-ethylenedioxythiophene):poly (styrene sulfonate)]와 PVX[poly(N-vinyl carbazole)] 고분자 물질을 정공 주입 및 수송층으로, 발광층으로 PFO-poss[Poly(9,9-dioctylfluorenyl-2,7-diyl) end capped with poss]를 사용하여 ITO/PEDOT:PSS/PVK/PFO-poss/LiF/Al 구조의 고분자 발광다이오드를 제작하였다. 이때 스핀코팅을 위한 발광 유기재료의 농도와 열처리 온도가 소자의 전기적, 광학적 특성에 미치는 영향을 조사하였다. 동일한 PFO-poss 농도에서 열처리 온도가 $100^{\circ}C$에서 $200^{\circ}C$로 증가할 경우 PLED 소자의 전류밀도와 휘도특성이 증가하는 경향을 나타내었다. 1.0 wt% 농도를 갖는 PFO-poss 유기물 발광충을 $200^{\circ}C$ 온도로 열처리 할 경우 $958\;cd/m^{2}$의 최대 휘도를 나타내었으며 발광파장은 523 nm 녹색계통의 파장이 크게 증가하여 청백색에 가까운 발광을 나타내었다. PFO-poss 농도증가(0.5 wt%에서 1.0 wt%)와 함께 PLED 소자의 열처리 온도를 $100^{\circ}C$에서 $200^{\circ}C$로 증가할 경우 CIE 색좌표는 청색 (x, y : 0.17, 0.14)에서 청백색 (x, y = 0.29, 0.41)발광으로 천이하는 경향을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.106-108
• /
• 2004

We have investigated the photolithographic patterning method of light emitting polymer film for polymer light emitting diodes (PLED). Blue light emitting polymers based on polyfluorene, which can be cured photochemically to yield an insoluble form, have been synthesized using Ni(0) mediated Yamamoto polymerization. The relationship between patterning property and several variables such as the intensity of the exposed UV light, the concentrations of additives, has been studied by using optical microscope analysis, UV/visible spectroscopy, and photoluminescence. We have successfully fabricated PLEDs composed of the patterned emissive layer and their electroluminescence property has been also investigated. In this presentation, the detailed photolithographic patterning method and its application for polymer light emitting display will be discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.91-94
• /
• 2004

We report on the opto-electronic properties of red, green, and blue poly (fluorene) co-polymer light-emitting devices (PLEDs) fabricated on a flexible plastic substrate. The plastic substrate used has a multi-layer structure with water vapor and oxygen transmission rates of less than $10^{-5}$ g/$cm^2$-day-atm and $10^{-7}$ cc/$cm^2$-day-atm, respectively. We obtained a wide range of color gamut and a maximum emission efficiency of 0.7, 10, and 1.7 cd/A for red, green, and blue PLEDs, respectively. Finally, a simple equivalent circuit model is proposed to simulate PLED current density-voltage characteristics.

• Journal of Information Display
• /
• 제6권1호
• /
• pp.33-36
• /
• 2005

To obtain various colors from the blue emitting poly(fluorene)s, two different approaches are introduced. One is copolymerization with low band gap comonomers and the other is molecular doping with various dyes. As fast and efficient exciton migration and trapping and/or energy transfer between the chromorphoric segments or doped dyes in conjugated polymers can shift the emission to longer wavelengths, these phenomena can be utilized to obtain various colors from the intrinsically blue light emitting poly(fluorene)s.

• ETRI Journal
• /
• 제27권2호
• /
• pp.181-187
• /
• 2005

Alkoxy-substituted poly(spirobifluorene)s and their copolymers with a triphenylamine derivative have been synthesized by Ni(0)-mediated polymerization. The polymers were well soluble in common organic solvents. Pure blue-light emissions without the long wavelength emission of poly(fluorene)s have been observed in the fluorescence spectra of polymer thin films. The light emitting diodes with a device configuration of ITO/PEDT:PSS(30 nm)/polymer(60 nm)/LiF(1 nm)/Al(100 nm) have been fabricated. The electroluminescence spectra showed the blue emissions without the long wavelength emission as observed in the fluorescence spectra. The relatively poor electroluminescence quantum yield of the homopolymer (0.017% @ 20 $mA/cm^{2}$) with color coordinates of (0.16, 0.07) has been improved by the introduction of triphenylamine moiety, and the copolymer with derivative exhibited an electroluminescence quantum yield of 0.15 % at 20 $mA/cm^{2}$ with color coordinates of (0.16, 0.08). Moreover, the introduction of polar side chains to the spirobifluorene moiety enhanced the device performance and led to the quantum yields of 0.6 to 0.7 % at 20 $mA/cm^{2}$, although there was some expense of color purities.