• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.391-392
• /
• 2012

In these days, the desire for the precise and tiny displays in mobile application has been increased strongly. Currently, laser displays ranging from large-size laser TV to mobile projectors, are commercially available or due to appear on the market [1]. In order to achieve a mobile projectors, the semiconductor laser diodes should be used as a laser source due to their size and weight. In this presentation, the continuous etch characteristics of Pd and AlGaN/GaN superlattice for the fabrication of blue laser diodes were investigated by using inductively coupled $CHF_3$ and $Cl_2$ -based plasma. The GaN laser diode samples were grown on the sapphire (0001) substrate using a metal organic chemical vapor deposition system. A Si-doped GaN layer was grown on the substrate, followed by growth of LD structures, including the active layers of InGaN/GaN quantum well and barriers layer, as shown in other literature [2], and the palladium was used as a p-type ohmic contact metal. The etch rate of AlGaN/GaN superlattice (2.5/2.5 nm for 100 periods) and n-GaN by using $Cl_2$ (90%)/Ar (10%) and $Cl_2$ (50%)/$CHF_3$ (50%) plasma chemistry, respectively. While when the $Cl_2$/Ar plasma were used, the etch rate of AlGaN/GaN superlattice shows a similar etch rate as that of n-GaN, the $Cl_2/CHF_3$ plasma shows decreased etch rate, compared with that of $Cl_2$/Ar plasma, especially for AlGaN/GaN superlattice. Furthermore, it was also found that the Pd which is deposited on top of the superlattice couldn't be etched with $Cl_2$/Ar plasma. It was indicating that the etching step should be separated into 2 steps for the Pd etching and the superlattice etching, respectively. The etched surface of stacked Pd/superlattice as a result of 2-step etching process including Pd etching ($Cl_2/CHF_3$) and SLs ($Cl_2$/Ar) etching, respectively. EDX results shows that the etched surface is a GaN waveguide free from the Al, indicating the SLs were fully removed by etching. Furthermore, the optical and electrical properties will be also investigated in this presentation. In summary, Pd/AlGaN/GaN SLs were successfully etched exploiting noble 2-step etching processes.

• Journal of Photoscience
• /
• v.11 no.32
• /
• pp.55-59
• /
• 2004

The present investigation is an attempt to create an optimized protocol for a bactericidal modality of different powers of He-Ne laser radiation to eliminate periodontitis disease causing bacteria from dental plaques. Periodontitis is most prevalent infectious disease of men and caused by a limited number of Gram negative oral bacteria. Porphyromonas gingivalis and Streptococcus sanguis are the important bacteria responsible for periodontitis diseases. Effect on periodontitis disease causing bacteria were produced by the exposure of different powers of He-Ne laser light i.e. 9 mW, 17 mW and 26 mW of red colour of wavelength 632.8 nm in two different periods of time i.e. 10 min. and 20 min. in the presence of dye Methylene blue (MB) used as a photosensitizer. The results have been shown in terms of percentage inhibition of colony forming units (cfu.) of bacteria. This study has shown that maximum inhibition of cfu. were observed in Laser+MB-20 min. exposure time. This inhibition was followed by Laser+MB-10 min., but minimum inhibition was seen in Laser only at 10 min. exposure. In case of effect of methylene alone on the cfu. of bacteria, it was seen that MB have not shown more inhibition of cfu. and it had shown that the no. of cfu. are very similar to that of control. The above observation of the present study was seen in case of every 3 different type of used powers of laser for both the bacteria. Maximum percentage inhibition of cfu. were seen in case of 26mW powers of He-Ne laser, which was 67. 28% to 61.42% for Porphyromonas gingivalis and Streptococcus sanguis respectively. So, increasing the power of laser (safe range for dentistry is 3-30 mW) under conditions shows an increased percentage inhibition of cfu. Thus the present investigation may be a useful adjunct with mechanical debridement in the prevention of recolonization of subgingival lesions by pathogenic microorganisms which are harmful and drug resistant.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.3
• /
• pp.507-513
• /
• 2002

Jaeumgenby-tang(JGT) have been used in oriental medicine for many centries as a a therapeutic agent of vertigo caused by deficiency of qi and blood. The effects of JGT on the regional cerebral blood flow(rCBF), mean arterial blood pressure(MABP) and cardiac muscle contractile force(CMF) is not known. The purpose of this Study was to investigate effects of JGT on the rCBF, MABP, CMF and mechanism of JGT induced changed rCBF, MABP, CMF. The changes of rCBF, MABP and CMF were determinated by Laser-Doppler Flowmetry(LDF). The results were as follows; JGT extract was increased rCBF, MABP and CMF in a dose-dependent, specially JGT extract was significantly increased rCBF and MABP. Pretreatment with propranolol was significantly inhibited JGT induced increase of rCBF but pretreatment with indomethacin and methylene blue were accelerated JGT induced increase of rCBF. Pretreatment with propranolol and indomethacin were inhibited JGT induced increase of MABP, but pretreatment with methylene blue was accelerated JGT induced increase of MABP. Pretreatment with propranolol was significantly inhibited JGT induced increase of CMF but pretreatment with indomethacin and methylene blue were accelerated JGT induced increase of CMF. This results suggest that JGT increased rCBF by increasing MABP and CMF and the action of JGT is mediated by adrenergic β-receptor.

• Journal of Pharmacopuncture
• /
• v.11 no.2
• /
• pp.5-12
• /
• 2008

Objective In this article, we report on the intradermal Alcian blue staining method for tracing the meridians of acupuncture. Methods 1% Alcian blue solution was injected into acupoints by using a 0.5mL insulin syringe with a 31-gauge needle, then the skin was incised and was observed under a stereoscopic microscope. The specimens were examined by using immunohistochemical methods and were observed under a confocal laser scanning microscope. Results A threadlike structure, which was visualized with Alcian blue, existed in dermis layer and proceeded to hypodermis. In this structure, characteristic alignments of rod- shaped nuclei and $1-2{\mu}m$ sized DNA granules were observed. Furthermore, abundant blood capillary plexuses, peripheral nerve endings, and a corpuscle-like structure(about $300{\mu}m$ in diameter) were visualized in the skin tissues of acupoints. Conclusion It was concluded that the specific threadlike and corpuscle-like structures corresponded to superficial Bonghan duct and corpuscle, respectively.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.4
• /
• pp.263-267
• /
• 2013

In this research, a novel optical measuring methodology for the measurement of oil thickness in seawater is suggested by evaluating the light absorption which is occurred in the process of penetrating through oil layer on seawater. Laser having monochromatic wave is used as a light source and photodiode which can convert the intensity of the light into an electrical signal is applied to measure the intensity of the penetrating light through the oil-water mixtures. In the experiment, bunker C and lubricating oil are used, and three different lasers having different wavelengths are applied and compared for the selection of an optimal light source. As a result, it is observed that in the case of blue laser, the intensity of the light on the optical sensor decreases with an increase in the oil thickness. Through this relation, both the presence of oil and the thickness of oil can be determined.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.38-44
• /
• 2000

In this paper, we have been fabricated λ/2 phase plates lot an optical pick-up using a blue violet laser diode by employing proton exchange and wet etching in LiNbO$_{3}$. Their functions and fabrication processes are described in detail. It is established the optimal fabrication conditions through the experimental results. The device characteristics are measured by the Mach-zender interferometer which is composed of the optical components and 632.8nm He-Ne laser. The measured phase error was ＋5$^{\circ}$~ -6$^{\circ}$(within 3%). This phase plate could be applied an useful device to improve the resolution and the stability of the optical pick-up which has a blue violet laser diode as an optical source.

• Restorative Dentistry and Endodontics
• /
• v.16 no.1
• /
• pp.106-120
• /
• 1991

The main purpose of this study was to investigate the possibility of obstruction of dentinal tubules through irradiation of the $CO_2$ laser on the dentin surface. For this study, 104 extracted caries - free premolars and molars were grinded their mesial or distal surface to expose dentin completly. And these specimens were divided into three Groups. Group I : those with their smear layer not removed and Group IT : those with their smear layer removed, were irradiated by the $CO_2$ laser(SPACE LASER - $CO_2$ VEGA 25) at five different energy levels ranging 4 - 20J/$cm^2$, and all specimens were observed with scanning eletron microscope (Hitachi S - 450). Group m was divided into 2 sub - groups: one with smear layer, another one without and those were irradiated with $CO_2$ laser of the same condition as Group I & II. All specimens were immersed in, $37^{\circ}C$, 0.5% methylene blue solution for 48 hours after 100 times of thermocycling at $4^{\circ}C$ and $60^{\circ}C$, and were observed with stereo -light microscope (Olympus SZH - ILLD) to evaluate dye penetration. The following results were obtained; 1. The dentinal tubules were obstructed through laser irradiation. 2. The dentinal tubules were still obstructed after treatment of 10% HCl/2sec., then it was proved that acid resistance of detin surface was also increased. 3. The Group of laser irradiation showed less dye penetration than control Group. 4. The smear layer hardly affected obstruction of the dentinal tubules through laser irradiation.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.5
• /
• pp.791-794
• /
• 2005

A visible photochemistry of maleic to fumaric acid adsorbed on silver nanoparticle surfaces was investigated as probed by SERS using a simple flow method. Photoisomerization of maleic to fumaric acid was consecutively observed in the condition of various flow rates, which varied the exposure time of laser beam. The sequential SERS spectra of maleic acid indicated that the photochemical isomerization and desorption took place simultaneously on silver nanoparticle surfaces as a function of laser fluency and wavelength. For 530.9nm laser line excitation, the rate constant coefficients were obtained with a = 5.9 $sec^{-1}$ mW for isomerization and b = 13.9 $sec^{-1}$ mW for desorption, which $k_1\;=\;aI^n\;and\;k_2\;=\;bI^m$. Both reactions were one photon process (n = 1, m = 1) of a visible light and relatively fast process whose decay time was in the range of milli-second for 50 mW laser power. The rate of photochemical reaction increased on going toward the blue and photodesorption was a dominant process. A simple flow method used in this study was very useful to study a relatively fast photochemical reaction of molecules adsorbed on silver nanoparticle surfaces.

• Rapid Communication in Photoscience
• /
• v.4 no.3
• /
• pp.54-58
• /
• 2015

Under the condition of femtosecond impulsive nonlinear optical irradiation, the bright and narrowed blue emission of silicon nanocrystal was observed. This synthetic method produced very small (~ 4 nm) oxide-capped silicon nanocrystal having probably ultra small emitting core (~ 1 nm) inferred from luminescence. By controlling the stirring condition, very high efficiencies of luminescence ( 4 fold higher) were obtained compared with the other conventional femtosecond laser fragmentation methods, which was attributed to the differences in hydration shell structure during the femtosecond laser induced irreversible phase transition reaction. When we properly adjusted the irradiation times of the white light continuum and stirring condition, very homogeneous luminescent silicon nanocrystal bands having relatively sharp lineshape were obtained, which can be attributable to the luminescent core site isolated and free from the surface defects.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.4
• /
• pp.899-905
• /
• 1996

For the purpose of evaluation of microleakage of class V resin restoration, 64 extracted bovine teeth were filled with two kinds of light curing composite resins(Z-100, Clearfil) and polymerized with 40 seconds of visible light and with 10 seconds of argon laser. After 1000 thermocycling($5^{\circ}C/55^{\circ}C$), specimens were placed in 1 % methylen blue dye solution for 72 hours in $37^{\circ}C$ water bath. The specimens were sectioned at center of filling body and the degree of dye penetration was observed with a stereomicroscope. The following results were obtained, 1. Differences of the microleakage of resin restorations polymerized with 10 seconds of argon laser and 40 seconds of visible light were statistically insignificant. 2. There was more microleakage in Z-100 than clearfil and there was a statistical significancy (p<0.05).