• Korean Chemical Engineering Research
• /
• 제53권3호
• /
• pp.327-332
• /
• 2015

A large amount of dye wastewater poses a threat to environmental safety. Disperse blue, an anthraquinone dye that is widely used in textile dyes, is difficult to degrade in wastewater. In this work, one fungus was screened according to the decolorization rate of disperse blue. The fungus was identified and named Aspergillus XJ-2 on the basis of its morphological characteristics and 18s rDNA. Response surface method was used to optimize culture conditions for A. XJ-2. The optimum values of obtained responses were as follows: temperature, $35^{\circ}C$; pH, 5.2; carbon-to-nitrogen ratio, 30:5.5; and rotation ratio, $175r{\cdot}min^{-1}$. Under optimized conditions, the decolorization rate of A. XJ-2 was up to 94.8% in 48 h.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.169-181
• /
• 2021

Five dyes based on phthalocyanine, a dye on azo, and a dye on anhraquinone were prepared from corresponding starting material to investigate the effects of substituent on thermal-stability of dyes which is essentially required to apply to the color filters. Synthesized dyes were confirmed their chemical structure using by 1H-NMR, MASS and Elemental analysis. The thermal-stability was evaluated by the weight reductions measured by TGA analysis comparing to that of conventional C.I. Pigment Blue 15:6. The absorption maxima were measured by UV-VIS spectrophotometer then the effects of substituent on absorption maximum was also investigated.

• 한국미생물·생명공학회지
• /
• 제29권2호
• /
• pp.67-71
• /
• 2001

자연계로부터 anthraquinone계 염료인 Remazol brilliant blue R를 분해.탈색하는 호알칼리성 균주를 분리하여 Bacillus sp. ARB1으로 명명하고 성장특성을 조사하였다. 최적 배양온도와 pH는 $35^{\circ}C$, pH 9.0로 나타났다. 배양액의 초기 pH가 10과 10.5일 경우 배양시간의 경과에 따라 pH 값이 점점 감소하여 40시간 후 9.3, 9.4로 각각 감소하였다. 진탕배양의 경우가 정치배양의 경우보다 Bacillus sp. ARB1의 탈색율이 현저히 높았다. 최적 배양조건에서 Bacillus sp. ARB1을 회분배양한 결과 배양 32시간 후 93%의 탈색율을 나타내었다. 실제 염색가공폐수를 사용한 회분배양에서 40시간 후에 탈색율은 78%로 나타났다.

• 한국염색가공학회지
• /
• 제25권1호
• /
• pp.13-17
• /
• 2013

A new assembly derived from 2,3-dibromo-5,6,7,8-tetrafluoroquinizarin and sodium diethyl-carbamodithiolate, was prepared as an efficient $Fe^{3+}$ colorimetric chemosensor with high selectivity over other cations $Fe^{3+}$, $Na^+$, $Mg^{2+}$, $Pb^{2+}$, $Cd^{2+}$, $Ni^{2+}$, $Ca^{2+}$, $Cu^{2+}$, $Hg^{2+}$, $Zn^{2+}$ : from the dark blue to brown color change that is visible by eyes. This assembly produced large bathochromic shift of 228 nm in the presence of $Fe^{3+}$ compared with the corresponding absorption maximum of the parent dye.

• 한국재료학회지
• /
• 제16권10호
• /
• pp.599-605
• /
• 2006

N-(3-triethoxysilylpropyl)-1,4-diaminoanthrquinone-2,3-dicarboximide (TESP-DADI), an organic blue pigment, has been prepared and incorporated into silica solid matrix reacting triethyl orthosilicate (TEOS) via sol-gel method. Morphology and microstructure of resulting hybrid pigment were studied employing SEM and TEM. The micrographs and particle size distributions showed that uniform pigment can be obtained employing TEOS-based sol-gel method forming silica core. Particle size distribution of dispersed pigment in water was examined using the technique of dynamic light scattering. The ensuing pigment dispersion ink was subjected to various physicochemical evaluation such as viscosity, surface tension, inkjet stability, storage stability, and color change as inkjet ink using spectrophotometric, and microscopic techniques.

• 한국염색가공학회지
• /
• 제6권2호
• /
• pp.30-39
• /
• 1994

To study the printing behaviors of Polyester and cotton(P/C) fabrics printed with disperse and reactive dyes, the effects of alkalis on the fixation of reactive dyes and the alkali-stability of disperse dyes in various methods of fixation were examined. The anthraquinone disperse dyes which have diamino derivatives as substituents without hydroxy group, such as C.I. Disperse Violet 1(D.V.1), C.I. Disperse Violet 28(D.V.28) and C.I.Disperse Blue 60(D.B.60) showed good results of fixation without regard to the concentration of NaHCO$_3$. In case of high temperature steaming(HTS) and unsaturated steaming(US)/HTS, D.V. 1 was alkali-stable and effective for P/C printing. A good result was obtained with D.V.1 and C.I.Reactive Orange 13(R.O.13) paste of 4% $K_{2}CO_{3}$. It was found that the unfixed D.V.28 bearing chloro group can hinder the fixation of monochlorotriaxinyl reactive dyes, and D.B.60 made little stain on 100% cotton. In thermosol(Tm), the dye uptake of D.V.1 was not decreased so much, but those of D.V.28 and D.B.60 were greatly decreased.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.403-408
• /
• 2003

A newly isolated Rhodopseudomonas palustris P4 could decolorize various synthetic dyes containing different chromogenic groups such as azo linkage (Crocein Orange G, New Coccine, Chromotrope FB, Congo Red, Remazol Black B), anthraquinone Reactive blue 2, or indigo Indigo Carmine. Among them, the degradation rate of Black B was studied in detial. Degradation of Black B followed the Arrhenius equation in 25 - $40^{\circ}C$ with an activation energy of 7.79 kcal/mol. Optimum pH was 8. Glucose in the range of 5 - 50g/l did not affect the Black B decolorization. When Black B increased from 25 mg/l to 2000 mg/l, decolorization activity increased almost linearly but the extent of decolorization was constant at about 86% irrespective of dye concentration. Analyses by HPLC revealed that the Black B molecules were partially degraded and some chromogenic intermediates were produced. These results indicate that Rps. palustris P4 has an outstanding capability to degrade various dyes.

• 한국염색가공학회지
• /
• 제24권2호
• /
• pp.113-120
• /
• 2012

Jacquard floor covering could be prepared from low-melting/regular sheath-core hybrid polyester, where the fiber is dyed in yarn state. With regard that the expected high shrinkage of the hybrid polyester in water makes problems in yarn dyeing, low-temperature dyeing properties of the hybrid polyester were studied. The rate of shrinkage of low-melting hybrid polyester exceeds 9% in hot water above $90^{\circ}C$, at such condition, cheese yarn dyeing is very difficult. Although disperse dyes exhaust in a relatively high speed on low-melting hybrid polyester, diffusion of these dyes to the core regular polyester was extremely slow under $90^{\circ}C$. Foron Blue E-BL 150, an anthraquinone E-type disperse dye, showed appreciable diffusion after 48hrs dyeing at $90^{\circ}C$. The fastness to rubbing and drycleaning were improved by one grade after reduction cleaning.