• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1373-1378
• /
• 2007

Metal forming ins the process changing shapes and mechanical properties of the workpiece without initial material reduction through plastic deformation. Above all, because of hot working carried out above recrystallization temperature can be generated large deformation with one blow, it can produce with forging complicated parts or heat resisting super alloy such as Inconel 718 has the worst forgeability. In this paper, we established optimal variation of hot heading precess of the Inconel 718 used in heat resisting component and evaluated mechanical properties hot worked produce. Die material is SKD61 and initial temperature is $300^{\circ}C$. Initial billet temperature and punch velocity changed, relatively. Friction coefficient is 0.3 as lubricated condition of hot working. CAE is carried out suing DEFORM software before making the tryout part, and it is manufactured 150 ton screw press with optimal condition. It is known that forming load was decreased according to decreasing punch velocity.

• Archives of Reconstructive Microsurgery
• /
• 제7권1호
• /
• pp.47-53
• /
• 1998

Despite of technical advances in surgery & other therapeutic modalities five-year survival rates in patients with carcinoma of hypopharynx have remained low. Many techniques have been used to create a structure capable of allowing the passage of food and fluids in an attempt to maintain the anatomy and physiology of the upper digestive system. The development of microsurgical techniques and the concept of mucocutaneous unit has brought about important changes in the reconstruction of cervical esophagus following tumor resection. The one-stage procedure using microvascular anastomosis of free jejunal graft provides physiologic reconstruction of cervical esophagus and has a low morbidity rate as well as a short recuperation time. With free jejunal graft, there is marked improvement in the quality of life and numerous advantages over the previous methods of reconstruction. Reconstruction of esophageal defect after resection of carcinomas of the hypopharynx, and cervical esophagus has traditionally been carried out with deltopectoral, or musculocutaneous skin-lined flaps. A second approach is to reconstruct the defect with the colon or stomach. A more ideal mettled is to repair these defects with mucosa-lined flaps. The authors experienced 35 cases of reconstruction of cervical esophagus after resection of carcinoma of the hypopharynx with free jejunal autograft and one case of secondary repair with radial forearm free flap after failure of initial free Jejunal autograft. Postoperative results were satisfactory in most patients and two patients expired in 8 days postoperatively because of carotid blow out by chronic inflammation.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권3호
• /
• pp.147-154
• /
• 2008

풍화토 사면은 장시간 공기에 노출되거나 물과 접촉을 하게 되면 전단강도가 급격히 저하되며 계절에 따른 수위의 변화가 매우 큰 댐사면의 경우는 강도저하가 더욱 크게 발생한다. 풍화토 사면의 강도저하 파악을 위하여 반복전단시험 및 수침 건조를 반복한 시료에 대한 잔류강도 시험을 통해 포화에 따른 강도의 저하를 파악하였다. 또한 소형동적콘관입시험기를 이용하여 관입타격횟수와 전단강도정수관계를 파악하고 인공신경망 해석을 통하여 관입타격횟수 Nc를 이용한 전단강도정수의 예측이 용이하도록 상관식을 구성하였다.

• 대한두개안면성형외과학회지
• /
• 제10권2호
• /
• pp.67-70
• /
• 2009

Purpose: Anatomical basis around orbit can be helpful in periorbital surgery, and there are many articles about measurement between periorbital reference points. In 1967, Jones and Evans measured the orbital wall thickness of Asian cadavers and this article has been cited more than 50 times. But there is no research in orbital thickness in Vivo. Author's idea was based on difference between live human and human cadaver. Material & Method: We conducted this study from 63 consecutive blow out fracture patients between January, 2000 to june, 2005 by collecting the bone fragments and measured the thickness of that fragment using vernia calipers. Anatomically, orbital floor is separated two area by inferior orbital fissure and we measured each area. Three areas were zone I (medial wall), zone II (medial to inferior orbital fissure) and zone III (lateral to inferior orbital fissure). Result: When the overall results were considered, the thickness of Zone I (medial wall of orbit) was average $0.131{\pm}0.006mm$ in male and $0.129{\pm}0.007mm$ in female and Zone II (medial side of orbital floor) was $0.251{\pm}0.005mm$ in male and $0.245{\pm}0.006mm$ in female, Zone III (lateral side of orbital floor) was $0.237{\pm}0.006mm$ in male and $0.226{\pm}0.006mm$ in female. There were no statistical difference between orbital wall thickness of male and female. Also, orbital wall thickness of adults measured $0.130{\pm}0.005mm$, $0.250{\pm}0.005mm$, $0.232{\pm}0.006mm$ in Zone I, Zone II, Zone III and $0.128{\pm}0.006mm$, $0.233{\pm}0.005mm$, $0.215{\pm}0.007mm$ in Zone I, Zone II, Zone III from childs, and there were no statistical difference between adult and child. Conclusion: This article is the first study about Korean orbital wall thickness, and can be helpful to periocular surgery.

• 유기물자원화
• /
• 제11권4호
• /
• pp.57-65
• /
• 2003

축산업은 수질이나 토양오염 그리고 대기오염에 미칠 수 있는 영향으로 인해 관심의 대상이 되는 산업에 포함되어 있다. 가축분뇨가 환경오염원이 될 수 있는 것은 사실이다. 이러한 가축분뇨를 처리할 수 있는 최상의 방법은 가축분뇨를 적절한 방법으로 퇴비화 하여 유기성 비료로서 재활용하는 것이다. 따라서 본 연구는 몇가지 방법의 퇴비화 조건에서 가축분뇨의 퇴비화 특성을 조사하기 위하여 실시되었다. 각기 다른 정도의 공기를 함유하는 퇴비단들의 물리화학적 특성을 퇴비화 전기간에 걸쳐 조사하였다. 본 실험에서는 돼지분뇨를 톱밥과 혼합하여 110L 크기를 가진 실험실 규모의 플라스틱 재질의 용기들과 목재로 된 $1.5m^3$ 크기의 소형 사각용기에 충진한 후 60일 동안의 퇴비화를 수행하였다. 시험 전 기간 동안 공기펌프로 퇴비단에 공기를 공급하였고 주입 공기량은 유입부에 설치된 밸브로 조절하였다. 공기주입량은 각 용기들에 따라 20, 50, 100, 150, $200L/m^3/mim$ 수준으로 하였다. 퇴비화 기간 동안 발효 최고 온도는 $72^{\circ}C$까지 상승하였다. 퇴비화 20일째에 송풍 처리구의 퇴비단 표면에서 포집된 가스에서의 $H_2S$, $CH_3SH$, DMS 그리고 DMDS 농도는 29, 16, 6, 5ppb 이었고 무송풍구에서의 농도는 각각 32, 24, 15, 14ppb의 수준을 나타냈다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.65-73
• /
• 2003

An experimental study on flame lift-off characteristics of propane jet flame highly diluted with nitrogen has been conducted introducing acoustic forcing with a tube resonant frequency. A flame stability curve is attained according to forcing strength and nozzle exit velocity for $N_2$ diluted flames. Flame lift-off behavior with forcing strength and nozzle exit velocity is globally categorized into three; a well premixed behavior caused by a collapsible mixing for large forcing strength, a coexistent behavior of well-premixed and edge flames interacting with well-organized inner fuel vortices for moderate forcing strengths, and edge flame behavior for small forcing strengths. Special focus is concentrated on the coexistent behavior of the flame base in lifted flame since this may give a hint to a possibility which the flame base behaves like a well-mixed premixed flame in highly turbulent lifted flames. It is also shown that the acoustic forcing to self-pulsating laminar lifted flame affects flame lift-off behavior considerably which is closely related to downstream flow velocity, mixture strength, effective fuel Lewis number, and flame stretch.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1997년도 제15회 KOSCO SYMPOSIUM 논문집
• /
• pp.61-68
• /
• 1997

The morphology and size distribution of chromium oxides and the concentration measurement of atomic arsenic have been studied in laminar diffusion flames. Nitrogen was added to vary flame temperatures in hydrogen flames. Ethene flames were used in order to investigate the potential for interaction between the soot aerosol that is formed in these flames and the chromium aerosol. Two sources of chromium compounds were introduced: chromium nitrate and chromium hexacarbonyl. A detailed investigation of the morphology was carried out by scanning electron microscopy (SEM). The amounts of Cr(VI) and total Cr were determined by a spectrophotometric method and by X-ray fluorescence spectrometry, respectively. Also, LIF was used for the measurement of atomic arsenic, which was excited at 197.2 nm and was detected at 249.6 nm. Results showed that the morphology of the particles varied with the flame temperature and with the chromium source. The particles were characterized by porous structures, cenospheres and agglomerated dense particles when chromium nitrate solution was added to the flames. At low to moderate temperatures, porous sintered cenospheric structures were formed, in some cases with a blow hole. At higher temperatures, an agglomerated cluster which was composed of loosely sintered submicron particles was observed. It was also found that the emission of Cr(VI) from the undiluted $H_2$ flame was more than 10 times larger than in the 50% $H_2$ / 50% $N_2$ flame on a mass basis. Single point LIF measurement of atomic arsenic indicated that arsenic exist only in the low temperature, fuel rich region.

• Journal of Welding and Joining
• /
• 제30권1호
• /
• pp.51-58
• /
• 2012

To assess hydraulic connections between sub-components of the International Thermonuclear Experimental Reactor (ITER) diagnostic port plug, the laser welding and ablation cutting process were investigated in order to be applied the remote handling maintenance. In this study, laser ablation cutting, which vaporizes a small amount of solid material directly into gas by focusing a laser beam of high density energy, is adopted in order to overcome the limitation of the normal laser cutting technology that the head should be placed as close to the work piece as possible to blow out melt metal at a distance. Complete cutting of a work piece is obtained by repetitive multi-passes of the laser beam. The welding and cutting process were tested on the sample work pieces and finally on a prototype of a hydraulic connection module for remote handling. The results showed that this process can be a promising candidate for hydraulic connections by remote handling.

• 대한두개안면성형외과학회지
• /
• 제16권3호
• /
• pp.125-130
• /
• 2015

Background: Poly-L-lactide materials combined with hydroxyapatite (u-HA /PLLA) have been developed to overcome the drawbacks of absorbable materials, such as radiolucency and comparably less implant strength. This study was designed to evaluate the usefulness of u-HA/PLLA material in the repair of orbital medial wall defects. Methods: This study included 10 patients with pure medial wall blow-out fractures. The plain radiographs were taken preoperatively, immediately after, and 2 months after surgery. The computed tomography scans were performed preoperatively and 2 months after surgery. Patients were evaluated for ease of manipulation, implant immobility, rigidity and complications with radiologic studies. Results: None of the patients had postoperative complications, such as infection or enophthalmos. The u-HA/PLLA implants had adequate rigidity, durability, and stable position on follow-up radiographic studies. On average, implants were thawed 3.4 times and required 14 minutes of handling time. Conclusion: The u-HA/PLLA implants are safe and reliable for reconstruction of orbital medial wall in terms of rigidity, immobility, radiopacity, and cost-effectiveness. These thin yet rigid implants can be useful where wide periosteal dissection is difficult due to defect location or size. Since the u-HA/PLLA material is difficult to manipulate, these implants are not suitable for use in complex 3-dimensional defects.

• 대한두경부종양학회지
• /
• 제11권2호
• /
• pp.167-172
• /
• 1995

Pharyngocutaneous fistula(PCF) is one of the complications following total laryngectomy in laryngeal and hypopharyngeal cancer. Fistula lead to delayed wound healing, more serious complications such as carotid blow-out, prolonged hospitalization, significant patient morbidity and occasional mortality. Identification of patients at high risk for fistula formation, appropriate preventive measures, and appropriate management are the head and neck surgeon's responsibility. So we analyzed the clinical data of pharyngocutaneous fistula which was developed after total laryngectomy. Following results were obtained: 1) Occurrence of PCF increases with salvage surgery compared to curative surgery. 2) Early detection and effective management of PCF are the key factors to decreasing the hospitalization period. 3) Constructing a pharyngostoma seems to be an ideal method of preventing dangerous complications and ultimately closing the fistula. 4) Simultaneous reconstruction is necessary in the high risk group.