• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.6
• /
• pp.745-752
• /
• 2005

Green tea has various medical effects. It was selected as new natural dyes guessing the effects of the biological activities are still appeared on dyeing. It was examined whether they have the function of Uv-blocker or not. Cotton, linen & Hanji were dyed with Green tea. Al, Cr, Cu, Fe and Sn were selected as the mordant and the UV blocking rate of dyed samples was measured. The results of this study as follows; 1 . The color of dyed samples with Green tea changed yellowish red except Hanji and linen mordanted with Fe. 2. K/S values of dyed samples with Green tea increased by the number of dyeing treatment(p<.01). 3. UVA and UVB blocking rate increased by the number of dyes. Cotton and Linen could block the UV radiation over $93\%$ and Hanji could block over $95\%$ after three times of dyeing. These results suggest that Hanji has possibility far various practical uses of clothing material in beautiful and functional aspect. It could have the biological effects when we put on dyed clothing material with Green tea.

• Journal of Integrative Natural Science
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2018

HEMA, AA, MMA, and EGDMA as crosslinking agent and AIBN as an initiator, and 2,4-dihydroxybenzophenone, 2-ethylhexyl-trans-4-methoxy-cinnamate, 2-hydroxy-4-(methacryloyloxy)benzophenone as additives at 0.1-1.0% ratios were used to manufacture hydrophilic ophthalmic lenses through thermal polymerization before their physical properties were measured. The results showed that the samples containing of 2,4-dihydroxybenzophenone and 2-ethylhexyl-trans-4-methoxy-cinnamate resulted in a decrease of the UV blocking performance after high-pressure sterilization whereas the sample containing 2-hydroxy-4-(methacryloyloxy)benzophenone showed no change in the UV blocking performance. It is judged that this is induced by presence or absence of an acyl functional group in benzophenone.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.1
• /
• pp.91-97
• /
• 2012

Purpose: This purpose of study is to investigate the effect of UV-A-blocking or brown-tinted ophthalmic lens against A2E photooxidation which known as one of the etiologies of AMD(Age-related macular degenaration). Methods: The photooxidation of A2E, synthetic product of two molecules of all-trans-retinal and ethanolamine, was induced by the exposure to blue light (420~470 nm, $94mW/cm^2$) for 3 minutes. The inhibitory effect of UVblocking or brown-tinted ophthalmic lens against A2E photooxidation was evaluated by UV absorbance and HPLC analysis of remained A2E after the exposure to blue light. Results: UV-blocking ophthalmic lens could not inhibit A2E photooxidation induced by blue light irradiation. There was no difference in A2E photooxidation in the presence of brown-tinted ophthalmic lens to block 15% of visible ray, however, those lenses blocking 55% or 86% of visible ray showed the inhibitory effect of A2E photooxidation as 9.98% and 16.55%, respectively. By HPLC analysis, the amount of residual A2E which was not blocked by any lens was $199.29{\pm}26.53{\mu}M$, however, the inhibitory effect against A2E photooxidation was shown in the presence of brown-tinted lens. The remained A2Es were $264.58{\pm}31.91{\mu}M$ and $402.93{\pm}28.68{\mu}M$ in brown-tinted lenses of 55% and 86% blocking visible ray, respectively. However, there was no inhibitory effect against A2E photooxidation in the case of UV-blocking lens by HPLC analysis. Conclusions: In this study, brown-tinted ophthalmic lens was confirmed to have the inhibitory effect against the photooxidation of A2E, a causing substance of AMD onset.

• Journal of the Korean Chemical Society
• /
• v.55 no.1
• /
• pp.98-103
• /
• 2011

This study was done for the preparation of macromolecular material with UV-blocking features by adding the benzophenone group that is commonly used as a UV-absorbent and $TiO_2$ which is known to be a very stable material in chemical and physical aspects. Also, we compared the level of UV absorbency of the polymer produced from polymerization with previous materials and measured basic properties such as water content, refractive index and optical transmittance of produced contact lenses. The results of the measurement showed that the refractive index and water content of the contact lens with added UV-absorbent was 1.430~1.440 and 35.0~45.0% respectively, which was similar to that of previous contact lenses. Also, for optical transmittances of each wave length, contact lenses without the UV-absorbent was 89%, 88% and 89% respectively for UV-A, UV-B and visible light, indicating that the UV transmittance is very high though contrary with cases of contact lenses with added 2-hydroxy-4-methoxy-benzophenone and 2,4-dihydroxy-benzophenone which showed transmittances of 0% and 6% respectively for UV-A and UV-B showing a UV-blocking effect. Meanwhile, contact lenses with added $TiO_2$ showed transmittance of 6% and 51% respectively for UV-A and UV-B also showing a UV-blocking effect. The visible transmittance was 77~89% showing that it satisfies the visible transmittance required for ophthalmological materials.

• Textile Coloration and Finishing
• /
• v.22 no.1
• /
• pp.71-76
• /
• 2010

In this study the optimum dyeing conditions and blocking effect of UV deodorization efficiency of Ligustrum japonicum Thunb were investigated. Colorants were water-extracted from Ligustrum japonicum Thunb fruit and freeze-drided to obtain colorants powder. The effects of dye concentration, dyeing temperature, dyeing time, and the number of dipping count were studied. Fastness to dry cleaning, rubbing, perspiration, and light were measured according to KS K 0644, KS K 0650, KS K 0715 and KS K 0700, respectively. In order to examine the dyeability according to dyeing conditions, reflectance of fabrics were measured by using UV/VIS spectrophotometer. The bath ratio was 1:20. Dyeing concentration was 100, 200, 300, 400 and 500% on the weight of fiber. Dyeing time was 20, 40, 60, and 80 minutes. Dyeing temperature was 20, 40, 60, 80, and $100^{\circ}C$. The infrared high pressure dying machine was used. As dyeing concentration increased, dye adsorption increased up to 400% and it slowed down. Dye uptake was increased with raising themperature up to $80^{\circ}C$ and it slowed down. Dye adsorption occurred rapidly at first 20 minutes and then it slowed down and reached almost maximum dye uptake at 60 min. Dye uptake increased by repeated dyeing. Therefore, it is considered that optimum dyeing condition is 400%(o.w.f.), $80^{\circ}C$, 60 min. And repeated dyeing improves dye uptake. Color fastness to dry cleaning and rubbing was good, but light fastness and perspiration fastness was not good. Blocking effect of ultraviolet radiation and deodorization efficiency was good.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.231-238
• /
• 2013

In this study, the $TiO_2$ nano spheres were synthesized by Sol-gel method to give an excellent UV-blocking effect and increase waste adsorption. The pH value was adjusted to obtain a superb UV-blocking effect and adsorption capacity due to the high surface area which is the characteristics of porosity. Base treated $TiO_2$ showed outstanding characteristics. The adsorption of gycerine onto the $TiO_2$ sample using TGA resulted in a high surface area of 1.16 mg/mg. This also showed a high reflectance in the UV-A region. In order to find the optimum dispersion, inorganic powder particles were maintained their sizes as 180 nm for about 6 months. The size of particles were measured using ester oil and silicon oil. Overall, the results reveal that $TiO_2$ has an excellent capability sunscreen in the UV-A region and skin waste adsorption.

• Korean Membrane Journal
• /
• v.7 no.1
• /
• pp.19-27
• /
• 2005

PP hollow fiber membrane was hydrophilized by EVOH dip coating followed by low temperature plasma treatment and UV irradiation. EVOH coating attained high water flux without any prewetting but its stability did not guaranteed at high water permeation rate. At high water permeation rate, water flux declined gradually due to swelling and delamination of the EVOH coating layer causing pore blocking effect. However, plasma treatment reduces the swelling, which suppress delamination of the EVOH coating layer from PP support result in relieving the flux decline. Also, UV irradiation helped the crosslinking of the EVOH coating layer to enhance the performance at low water permeation rate. FT-IR and ESCA analyses reveal that EVOH dip coating performed homogeneously through not only membrane surface but also matrix. Thermogram of EVOH film modified plasma treatment and W irradiation show that crosslinking density of EVOH layer increased. Chemical modification by plasma treatment and UV irradiation stabilized the hydrophilic coating layer to increase the critical flux of the submerged membrane.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.173-180
• /
• 2004

Nano sized ZnO particle as 20-30nm applies for material, pigments, rubber additives, gas sensors, varistors, fluorescent substance as well as new material such as photo-catalyst, sensitizer, fluorescent material. ZnO with a particle size in the range 20-30nm has provided to be an excellent UV blocking material in the cosmetics industry, which can be used in sunscreen product to enhance the sun protection factor and natural makeup effect. But pure ZnO particles application limits for getting worse wearing feeling. We make high-functional inorganic-composite that coated with nano-ZnO on the plate-type particle such as sericite, boron nitride and bismuthoxychloride. In this experiment, we synthesized composite powder using hydrothermal precipitation method. The starting material was ZnCl$_2$ Precipitation materials were used hexamethylenetetramine(HMT) and urea. We make an experiment with changing as synthesis factors that are concentrations of starting material, precipitation materials, nuclear formation material, reaction time, and reaction temperature. We analyzed composite powder's shape, crystallization and UV-blocking ability with FE-SEM, XRD, FT-IR, TGA-DTA, In vitro SPF test. The user test was conducted by product's formulator. In the results of this study, nanometer sized ZnD was coated regardless of the type of plate-powder at fixed condition range. When the coated plate-powders were applied in pressed powder product, the glaze of powder itself decreased, but natural make-up effect, spreadability, and adhesionability were increased.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.85-85
• /
• 2009

• Journal of the Korean Chemical Society
• /
• v.56 no.6
• /
• pp.725-730
• /
• 2012

HEMA (2-hydroxyethyl methacrylate), EGDMA (ethylene glycol dimethacrylate; cross-linker), MMA (methyl methacrylate) and AA (acrylic acid) were copolymerized with ethyl gallate and propyl gallate as additives in the presence of AIBN (2,2'-azobisisobutyronitrile; initiator). The measurement of physical properties of the produced copolymers exhibited that refractive index, water content, visible transmittance, tensile strength, and contact angle were in the range of 1.433-1.435, 38.71-38.99%, 85.4-88.8%, 0.2468-0.2740 kgf and $49.77-36.29^{\circ}$, respectively. The transmittances of the copolymers were measured to be in the range of 49.0-7.4% and 71.0-43.4% for UV-B and UV-A, respectively, indicating that the copolymers have UV-blocking effect. The produced copolymers containing ethyl gallate and propyl gallate satisfied the basic physical properties required for the fabrication of hydrogel contact lenses. The copolymers showed an increase of wettability and UV-blocking effects while having no significant change in water content compared to the gallate-free copolymers.