• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.297-305
• /
• 2007

In the paper, a Motion JPEG2000 coder which has been set as the standard for image compression by the Digital Cinema Initiatives (DCI), an organization composed of major movie studios was implemented into a target FPGA. The DWT (Discrete Wavelet Transform) based on lifting and the Tier 1 of EBCOT (Embedded Block Coding with Optimized Truncation) which are major functional modules of the JPEG2000 were setup with dedicated hardware. The Tier 2 process was implemented in software. For digital cinema the tile-size was set to support $1024\times1024$ pixels. To ensure the real-time operations, three entropy encoders were used. When Verilog-HDL was used for hardware, resources of 32,470 LEs in Altera's Stratix EP1S80 were used, and the hardware worked stably at the frequency of 150Mhz.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.6
• /
• pp.78-87
• /
• 2009

In this paper, we propose a new method of blocky artifacts measurement for IP based video service. In order to assess the quality of IP based video service, we classify degradation into blocking artifacts by network error or by transmission error. in order to assess blocking artifacts based on No-reference, we estimate blocky artifacts from network errors and image compression by calculating amount of difference between target block and neighbor blocks and error concealment algorithm in a video receiver. To ensure accuracy of proposed method, we compare our result to MOS data using SSCQE method. Experimental results show that the proposed algorithm is better than a conventional method by around 1.3.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.75-88
• /
• 2009

This paper presents a video quality assessment method based on quality degradation factors of real-time multimedia streaming services. The video quality degradation is caused by video source compression and network states. In this paper, we propose a blocky metric on an image domain to measure quality degradation by video compression. In this paper, the proposed boundary strength index for the blocky metric is defined by ratio of the variation of two pixel values adjacent to $8{\times}8$ block boundary and the average variation at several pixels adjacent to the two boundary pixels. On the other hand, unnatural image movement caused by network performance deterioration such as jitter and delay factors can be observed. In this paper, a temporal-Jerkiness measurement method is proposed by computing statistics of luminance differences between consecutive frames and play-time intervals between frames. The proposed final Perceptual Video Quality Metric (PVQM) is proposed by consolidating both blocking strength and temporal-jerkiness. To evaluate performance of the proposed algorithm, the accuracy of the proposed algorithm is compared with Difference of Mean Opinion Score (DMOS) based on human visual system.

• Journal of Broadcast Engineering
• /
• v.23 no.6
• /
• pp.768-779
• /
• 2018

In this paper, we propose a novel video quality function for video processing based on MSSSIM to select an appropriate video processing filter and to accommodate multiple processing filters to each pixel block in a picture frame by a mathematical selection law so as to maintain video quality and to reduce the bitrate of compressed video. In viewpoint of video compression, since the properties of video quality and bitrate is different for each picture of video frames and for each areas in the same frame, it is difficult for the video filter with single property to satisfy the object of increasing video quality and decreasing bitrate. Consequently, to maintain the subjective video quality in spite of decreasing bitrate, we propose the methodology about the MSSSIM as the measure of subjective video quality, the KL-Divergence as the measure of bitrate, and the combination method of those two measurements. Moreover, using the proposed combinatorial measurement, when we use the multiple image filters with mutually different properties as a pre-processing filter for video, we can verify that it is possible to compress video with maintaining the video quality under decreasing the bitrate, as possible.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.3
• /
• pp.405-417
• /
• 2001

In this paper, since we currently using surveillance system of analog type bring about waste of resource and efficiency deterioration problems, we describe new solution that design and implementation to the digital surveillance system of new type applying compression techniques and encoding techniques of image data using MPEG-2 international standard. Also, we proposed fast motion estimation algorithm requires much less than the convectional digital surveillance camera system. In this paper a fast motion estimation algorithm is proposed the MPEG-2 video encoding. This algorithm is based on a hybrid use of the block matching technique and gradient technique. Also, we describe a method of moving object extraction directly using MPEG-2 video data. Since proposed method is very simple and requires much less computational power than the conventional object detection methods. In this paper we don't use specific H/W and this system is possible only software encoding, decoding and transmission real-time for image data.

• Journal of KIISE:Software and Applications
• /
• v.31 no.9
• /
• pp.1142-1149
• /
• 2004

Motion Estimation(ME) has been developed to reduce temporal redundancy in digital video signals and increase data compression ratio. ME is an Important part of video encoding systems, since it can significantly affect the output quality of encoded sequences. However, ME requires high computational complexity, it is difficult to apply to real time video transmission. for this reason, motion estimation algorithms with low computational complexity are viable solutions. In this paper, we present an efficient method with low computational complexity based on spatial and temporal correlations of motion vectors. The proposed method uses temporally and spatially correlated motion information, the motion vector of the block with the same coordinate in the reference frame and the motion vectors of neighboring blocks around the current block in the current frame, to decide the search pattern and the location of search starting point adaptively. Experiments show that the image quality improvement of the proposed method over MVFAST (Motion Vector Field Adaptive Search Technique) and PMVFAST (Predictive Motion Vector Field Adaptive Search Technique) is 0.01～0.3(dB) better and the speedup improvement is about 1.12～l.33 times faster which resulted from lower computational complexity.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.63-72
• /
• 2005

In this paper, we propose the bit-rate control algorithm for the block based image compression like H.263, H.263+ or MPEG-4. The proposed algorithm is designed to identify the quantization parameter set through the Lagrangian optimization technique based on the well-known linear source model. We set the Lagrangian cost function with the rates and distortion calculated from the linear source model. We calculate the quantization parameter set using the Vitervi algorithm to solve the Lagrangian optimization problem considering the Dquant method of H.263 and MPEG-4. The proposed algorithm improves the video quality by up to 1.5 dB compared with the TMN8 scheme, and is more effective in the video sources with dynamic activities than the consistent quality approaches.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1307-1316
• /
• 1996

In this paper, we propose a vector quantization method which uses a dynamic address mapping based on exploring the high interblock correlation. In the proposed method, we reduce bit-rate by defining an address transform function, which maps a VQ address of an input block which will be encoded into a new address in the reordered codebook by using side match error. In one case that an original address can be transformed into a new transformed address which is lower than the threshold value, we encode the new address of the transformed convector, and in the other case we encode the address of the original convector which is not transformed. Experimental results indicate that the proposed scheme reduces the bit-rate by 45~50% compared with the ordi-nary VQ method forimage compression, at the same quality of the reconstructed image as that of the ordinary VQ system.

• Journal of Korea Multimedia Society
• /
• v.10 no.11
• /
• pp.1427-1438
• /
• 2007

Video watermarking technologies are classified into types of four kinds. The first type is to embed the watermark into a raw video signal and to code the watermarked video signal. Most of video watermarking technologies fall into the category of this type. The second type is to apply watermarking to the coding process, such as block DCT and quantization. The third is to directly embed the watermark into the compressed bitstream itself. Generally, it is referred as labelling rather than watermarking. Finally, the fourth is to embed the water mark into MPEG motion vector. This type has the difficulty in real-time process because of the high complexity and has the blocking effects because of DCT-based on coder. In this paper, we proposed the digital video watermarking that embed the watermark in SPIHT video code for I-frame using motion vector analysis. This method can remove the blocking effect occurred at the DCT-based on coder and obtain video data that has progressive transmission property. The proposed method is to select the region for the watermark embedding in I frame using motion vector estimated from the previous P or B frame. And then, it is to perform DWT and embed the watermark based on HVS into the wavelet coefficients in the same subband of DWT as the motion vector direction. Finally, the watermarked video bitstream is obtained by the SPIHT coder. The experimental results verified that the proposed method has the invisibility from the objective and subjective image quality and the robustness against the various SPIHT compression and MPEG re-code.