• Steel and Composite Structures
• /
• v.46 no.1
• /
• pp.93-105
• /
• 2023

This paper examines a high-speed railway CRTS-II ballastless track-bridge system. Using the stationary potential energy theory, the mapping analytical solution between the bridge deformation and the rail vertical geometric irregularity was derived. A theoretical model (TM) considering the nonlinear stiffness of interlayer components was also proposed. By comparing with finite element model results and the measured field data, the accuracy of the TM was verified. Based on the TM, the effect of bridge deformation amplitude, girder end cantilever length, and interlayer nonlinear stiffness (fastener, cement asphalt mortar layer (CA mortar layer), extruded sheet, etc.) on the rail vertical geometric irregularity were analyzed. Results show that the rail vertical deformation extremum increases with increasing bridge deformation amplitude. The girder end cantilever length has a certain influence on the rail vertical geometric irregularity. The fastener and CA mortar layer have basically the same influence on the rail deformation amplitude. The extruded sheet and shear groove influence the rail geometric irregularity significantly, and the influence is basically the same. The influence of the shear rebar and lateral block on the rail vertical geometric irregularity could be negligible.

• Journal of Korean Society of Transportation
• /
• v.18 no.1
• /
• pp.17-26
• /
• 2000

U-turns are allowed widely at the intersections by local police department while the left-turn Phases have been gradually Prohibited. However, any strategies for U-turn movements at signalized intersections are unavailable. Therefore, the Purpose of this study is to Propose the efficient operational method of Urban arterial adopting U-turn strategies. Four alternatives are evaluated they are, 1) U-turn movements are allowed at the adjacent intersection with exclusive U-turn lane while the major or the minor approach is Prohibited, 2) U-turn movements are allowed at the adjacent mid-block Pedestrian crossing with exclusive U-turn lane while the major approach is Prohibited. 3) U-turn movements are allowed at the adjacent mid-block Pedestrian crossing with exclusive U-turn lane while the minor approach is prohibited and 4) Comparative one between alternative 3 and 4. From the results of this study, it concludes that the method of U-turn movements allowed at the adjacent mid-block pedestrian crossing with exclusive U-turn lane is the most effective strategy among those alternatives. The strategies of alternative 1 and 4 are Proposed by the boundary based on the major through and left-turn volumes and the minor left-turn volume.

• Journal of the Korean earth science society
• /
• v.34 no.3
• /
• pp.235-248
• /
• 2013

The purpose of this study is to investigate a feasibility of a small mountain as a field work site on geological features in Earth sciences classes at all levels. Mt. Geumdang with the height of 305 meters from the sea level is located in the metropolitan city of Gwangju, southern part of Korea. The study reviews the human and natural geography, geological features, geomorphic resources, landscapes, and conveniences of the mountain for a possibility of meaningful field work. The population within the distance of 5 km from the mountain stands at about 620,000 and 170,000 of them are students and teachers. Mt. Geumdang has a warm temperature climate with low rainfall throughout the year, so it seems suitable for a field survey. Road network and public transportation system around the area are well-developed and easily accessible. Mt. Geumdang shows various rock type and geological structures. The basement rock is Gwangju granite, which is plutonic body of the Jurassic period. Also, granophyre (micrographic granite) and various volcanic rocks distributed as bedded tuff, lapilli tuff, and rhyolite of the Cretaceous period. Many andesitic and felsic dykes were intruded into the rock by joint system. In Mt. Geumdang, many geomorphic resources are found such as U shaped mountain, joint, fault, lamination, gnamma, tor, cliff, groove, block stream and block field, regolith, and saprolite. It has a beautiful mountain scenery including the view of whole shape of Mt. Mudeung, panoramic view of the town, Pungam lake, World Cup stadium and sunrise and sunset. Furthermore, the area has ecologic study facilities related to geology, emergency medical and convenience facilities for field works. In conclusion, Mt. Geumdang is highly feasible for geological field studies at all levels.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.105-116
• /
• 2017

The purpose of this study is to provide the information on genesis of obsidian occurring in the southwestern part of Ulleung Island, Korea, and to discuss its implications for volcanic activity through volcanological and mineralogical properties of obsidian. Obsidian occurs locally at the lower part of the Gombawi welded tuff, showing various complex textures and flow banding. Though obsidian is mostly homogeneous, it is closely associated with alkali feldspar phenocrysts, reddish tuff, and greyish trachyte fragments. The obsidian occurs as wavy, lenticular blocks or lamination composed of fragments. Cooling fractures developed on obsidian glass are characterized by perlitic cracks, orbicular or spherical cracks, indicating that obsidian rapidly quenched to form an amorphous silica-rich phase. It is evident that hydration took place preferentially at the outer rim relative to the core of obsidian, forming alteration rinds. The glassy matrix of obsidian includes euhedral alkali feldspars, diopside, biotite, ilmenite, and iron oxides. Microlites in glassy obsidian are composed mainly of alkali feldspars and ilmenite. Quantitative analysis by EPMA on the obsidian glass part shows trachytic composition with high iron content of 3 wt.%. Accordingly, obsidian formed with complex textures under a rapid cooling condition on surface ground, with slight rheomorphism. Such results might be induced by collapse of lava dome or caldera, which produced the block-and-ash flow deposit and the transportation into valley while keeping high temperatures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.503-510
• /
• 2020

Eco-friendly mountain railways operate on concrete rack tracks embedded on existing sharp curved and steep roads to preserve the environment in mountainous areas. Owing to the narrow roads, single lines are inevitable, and many branches are required. In branches, previous switchers and heating devices cannot be applied, because of the limited spacing for the rack and the slow removal of thick ice. To solve these problems, a switch and a heating device have been developed. The switcher changes the line by moving the block of concrete track with hydraulic actuators. The lack of discontinuity reduces the derailment risk and makes locking simple. The heating device uses high frequency induction coils to increase the efficiency and melt the thick ice rapidly. The prototype switcher and heating device were produced and operated to prove their performance. The heating device yielded a 10 times greater efficiency than the previous one. The switcher and heating device are the essential core technologies for the operation of mountain trams in winter and contribute to the spread of mountain railways to domestic or foreign resort areas by enhancing safety and efficiency. In addition, they can provide transportation rights to local residents in poor winter traffic, and bring about tourism and local economic growth.

• Korean Journal of Microbiology
• /
• v.52 no.4
• /
• pp.391-397
• /
• 2016

Clostridium is a genus of Gram-positive, rod shape, spore-forming obligate anaerobe. Recently, Clostridium has been attracted as a host for bio-based chemical production, due to its diversity of substrate utilization and the production ability for metabolites which can be used as a building block for chemical production. Especially, butanol produced from Clostridium has been considered as an alternative fuel. As a transportation fuel, butanol has a higher energy density and lower hygroscopicity compared to ethanol, the first generation biofuel. Recently, metabolic engineering of Clostridium has been massively conducted for butanol production. In this study, the metabolic engineering strategy of Clostridium for butanol production has been reviewed with a brief perspective.

• The Korean Journal of Air & Space Law and Policy
• /
• v.20 no.2
• /
• pp.235-251
• /
• 2005

German working hour law of 1994(Arbeitszeitgesetz) provides maximum working hour as 8 hours a day and 48 hours per week. The law provides that minimum 11 hours rest-time is required between the end of a day's work and the beginning of the next day's work. Namely, the hour that the workers are put under commanding of the user is restricted within 13 hours per day. In the meantime, article 5, 7, 14, and 15 of the law have some letting the exceptional provisions regarding the working hour and rest-time of flight crew, and 2nd administrative order for the aviation transportation business owner, which is established based on such exceptional provisions(2.DV LuftBO), provides the working hour and rest-time of flight crew quite in detail. The administrative order is detailed quite regarding block time, flight working hour, and rest-time. So, it does not need to interpret additionally. Airlines in Korea should observe the both Labor Standard Act applying to general workers and Aviation Act focused on flight crew, so it is difficult that airlines manages working hour and rest-time of the flight crew efficiently. Therefore, it is desirable that our country refers to and considers adopting this legislation method of Germany which regulates working hour and rest-time of flight crew in detail in the 2.DV LuftBO.

• The Journal of Society for e-Business Studies
• /
• v.24 no.3
• /
• pp.1-18
• /
• 2019

Due to the great advances in e-Marketplace and changes in type of items purchased from the online market, it has been dramatically increased the demand of the storage and transportation under the special conditions such as restricted temperature. Especially, the cold chain needs the way to transparently measure and monitor the entire network in realtime because it has a very complicated structure and requires totally different criteria at the every different steps and items. In this research, it has been presented the performance evaluation metrics to make contract using service level agreement (SLA), the way to apply the smart contract based on blockchain, the structure of blocks, service platform and application in order to build cold chain which can prevent the risk factors by measuring and sharing information in realtime using block chain technology. In addition, we have proposed the way to store the measured performance and reputation of each player in the block using smart contract based on SLA. With the presented framework, all players including service providers as well as users can secure the information for making the rational decisions. When the service platform is actually built and operated, it seems possible to secure the information in transparently and realtime. Also, it is possible to prevent the risk factors or prepare the preemptive plans to react on them.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.181-190
• /
• 2005

The time required for airport process is considered more important as the airports are becoming bigger. International Civil Aviation Organization mattes this international standards and recommends not to exceed it. The passenger forecasting model is developed to predict the number of passengers at the check-in counter, and the area of formalities for departure and entry. In case of forecasting the number of outbound-passengers. the patterns of show-up lead time(SLT) at the check-in counter and lag time from check-in counter to the area of departure formalities are modeled in terms of time. On the other hand, the matter of the choice of check-in counters and areas of departure formalities are modeled in terms of space. In case of forecasting the number of inbound-passengers and transfer passengers, the time of airplane movement from arrival to block on at the gate and the time of passengers required from gate to the area of formalities for entry are modeled in terms of time. While the matter of the choice of gates and the areas of formalities for entry are modeled in terms of space. The average error of forecasting outbound-passengers and inbound-passengers is respectively 15% and 10%, which are considered excellent with the 5% error of passenger reservation information as input data. Through the development of passenger forecasting models, we assure we could provide passengers with valuable service because we allocate resource such as employees and equipments according to the degree of concentration of passengers.

• Restorative Dentistry and Endodontics
• /
• v.30 no.5
• /
• pp.393-401
• /
• 2005

The purpose of this study was to compare the canal configuration after shaping by ProTaper rotary files and ProTaper hand files in resin simulated canals. Forty resin simulated canals with a curvature of J-shape and S-shape were divided into four groups by 10 blocks each Simulated root canals in resin block were prepared by ProTaper rotary files and ProTaper hand files using a crown-down pressureless technique All simulated canals were prepared up to size $\#25$ file at end-point of preparation. Pre- and post-instrumentation images were recorded with color scanner. Assessment of canal shape was completed with an image analysis program. Measurements were made at 0, 1, 2, 3, 4, 5, 6 and 7 mm from the apex. At each level, outer canal width, inner canal width, total canal width, and amount of transportation from original axis were recorded. Instrumentation time was recorded. The data were analyzed statistically using independent t-test. The result was that ProTaper hand files cause significantly less canal transportation from original axis of canal body and maintain original canal configuration better than ProTaper rotary files, however ProTaper hand files take more shaping time.