• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.90.1-90.1
• /
• 2010

Due to the rapidly diminishing energy sources and higher energy production cost, the interest in dye-sensitized solar cells (DSSCs) has been increasing dramatically in recent years. A typical DSSC is constructed of wide band gap semiconductor electrode such as $TiO_2$ or ZnO that are anchored by light-harvesting sensitizer dyes and surrounded by a liquid electrolyte with a iodide ion/triiodide ion redox couple. DSSCs based on one-dimensional nano-structures, such as ZnO nanorods, have been recently attracting increasing attention due to their excellent electrical conductivity, high optical transmittance, diverse and abundant configurations, direct band gap, absence of toxicity, large exiton binding energy, etc. However, solar-to-electrical conversion performances of DSSCs composed of ZnO n-type photo electrode compared with that of $TiO_2$ are not satisfactory. An important reason for the low photovoltaic performance is the dissolution of $Zn^{2+}$ by the adsorption of acidic dye followed by the formation of agglomerates with dye molecules which could block the I-diffusion pathway into the dye molecule on the ZnO surface. In this paper, we prepared the DSSC with the ZnO electrode using the chemical bath deposition (CBD) method under low temperature condition (< $100^{\circ}C$). It was demonstrated that the ZnO seed layers played an important role on the formation of the ZnO nanostructures using CBD. To achieve truly low-temperature growth of the ZnO nanostructures on the substrates, a two-step method was developed and optimized in the present work. Firstly, ZnO seed layer was prepared on the FTO substrate through the spin-coating method. Secondly, the deposited ZnO seed substrate was immersed into an aqueous solution of 0.25M zinc nitrate hexahydrate and 0.25M hexamethylenetetramine at $90^{\circ}C$ for hydrothermal reaction several times.

• 한국광물학회지
• /
• 제16권2호
• /
• pp.181-189
• /
• 2003

킹죠지섬에 분포하는 빙하쇄설물의 화학적 풍화작용의 유무를 탐색한 결과, 다양한 풍화조직들과 이차광물들이 관찰되었다. 지표에 노출된 안산현무암질 응회암 각력에는 방해석이 선택적으로 용해되어 형성된 풍화테들이 형성되어 있다. 풍성화산유리의 가장자리에는 Al, Fe, Ti가 상대적으로 농집된 매우 얇은 용탈층이 존재하며, 앨로패인과 철산화물 등으로 구성되어 있다. 화강섬록암 지역의 흑운모는 질석과 흑운모-질석 혼합층으로 변질되었으며 드물게 아주 미량의 캐올리나이트나 깁사이트가 생성되었다. 열수변질대 지역의 황철석은 산화철로 풍화되었으며, 주변의 녹니석은 부분적으로 팽윤성광물로 풍화되었다. 그러나 사장석과 K장석 등은 거의 변질되지 않았다. 바톤반도의 빙하쇄설물은 미약하나마 화학적 풍화작용을 받아 앨로패인과 산화철 등의 이차광물이 생성되고 있으나, 킹죠지섬 주변 해양 퇴적물에 풍부한 스멕타이트의 대량 생성은 관찰되지 않았다.

• 한국재료학회지
• /
• 제14권10호
• /
• pp.688-695
• /
• 2004

The capacitor contact barrier(CCB) layers have been introduced in the FeRAM integration to prevent the Pt/Al reaction during the back-end processes. Therefore, the interdiffusion and intermetallic formation in $Pt(1500{\AA})/Al(3000{\AA})$ film stacks were investigated over the annealing temperature range of $100\sim500^{\circ}C$. The interdiffusion in Pt/Al interface started at $300^{\circ}C$ and the stack was completlely intermixed after annealing over $400^{\circ}C$ in nitrogen ambient for 1 hour. Both XRD and SBM analyses revealed that the Pt/Al interdiffusion formed a single phase of $RtAl_2$ intermetallic compound. On the other hand, in the presence of TiN($1000{\AA}$) barrier layer at the Pt/Al interface, the intermetallic formation was completely suppressed even after the annealing at $500^{\circ}C$. These were in good agreement with the predicted effect of the TiN diffusion barrier layer. But the conventional TiN CCB layer could not perfectly block the Pt/Al reaction during the back-end processes of the FeRAM integration with the maximum annealing temperature of $420^{\circ}C$. The difference in the TiN barrier properties could be explained by the voids generated on the Pt electrode surface during the integration. The voids were acted as the starting point of the Pt/Al reaction in real FeRAM structure.

• IMMUNE NETWORK
• /
• 제7권4호
• /
• pp.203-208
• /
• 2007

Background: Angiogenesis mediated by VEGF constitutes a new target for anti-cancer therapy which has explored through different ways of intervention aiming at the blocking of the tumoral angiogenesis. In the present study, we developed the assays by which efficacies of anti-VEGF inhibitor candidates are evaluated at the various levels. Methods & Results: First, we developed two sandwich ELISAs using coated anti-VEGF Ab and soluble Flt-1 receptor fusion protein (sFlt-1/Fc). As low as 200 pg/ml of hVEGF diluted in human sera was detectable by these assays. In addition, we found that VEGF inhibitors ($2{\mu}g/ml$ of either anti-VEGF Ab or sFlt-1/Fc) completely block 5 ng/ml VEGF in these ELISAs. Subsequently, two bioassays, wound healing and HUVEC tube formation assays, revealed that anti-VEGF Ab $(1{\mu}g/ml)$ & sFlt-1/Fc Ab $(1{\mu}g/ml)$, or SU5416 (VEGFR tyrosine kinase inhibitor, $1{\mu}M$) prevents the activity of VEGF $(1{\sim}10ng/ml)$. Finally, secretion of MMP-9 by VEGF-stimulated macrophages was abolished by treatment of anti-VEGF Ab $(1{\mu}g/ml)$ in gelatin zymography. Conclusion: ELISAs together with bioassays developed in this study are appropriate for evaluation of the efficacy of inhibitors of VEGF.

• Journal of Periodontal and Implant Science
• /
• 제42권4호
• /
• pp.136-143
• /
• 2012

Purpose: The osseointegration around titanium mini-implants installed in macroporous biphasic calcium phosphate (MBCP) blocks was evaluated after incubation with recombinant human bone morphogenetic protein-2 (rhBMP-2) in an ectopic subcutaneous rat model. Methods: Mini-implants (${\varphi}1.8{\times}12$ mm) were installed in MBCP blocks (bMBCPs, $4{\times}5{\times}15$ mm) loaded with rhBMP-2 at 0.1 mg/mL, and then implanted for 8 weeks into subcutaneous pockets of male Sprague-Dawley rats (n=10). A histomorphometric analysis was performed, and the bone-to-implant contact (BIC) and bone density were evaluated. Results: Significant osteoinductive activity was induced in the rhBMP-2/bMBCP group. The percentage of BIC was $41.23{\pm}4.13%$ (mean${\pm}$standard deviation), while bone density was $33.47{\pm}5.73%$. In contrast, no bone formation was observed in the bMBCP only group. Conclusions: This model represents a more standardized tool for analyzing osseointegration and bone healing along the implant surface and in bMBCPs that excludes various healing factors derived from selected animals and defect models.

• 대한화학회지
• /
• 제21권4호
• /
• pp.284-292
• /
• 1977

메타크릴酸과 diglycidyl ether 型 低分子量의 에폭시樹脂로부터 에폭시樹脂의 dimethacrylate를 合成하였으며 이 prepolymer와 단위체인 스티렌 및 polyethyleneglycol dimethacrylate 混合物의 電子線硬化에 關하여 檢討하였다. 에스테르化反應은 메타크릴酸에 對하여 約 250∼300ppm以上의 hydroquinone과 $1{\%}$(wt) 以下의 triethanolamine의 添加로서 거의 定量的으로 進行되었다. 空氣中에서 행한 硬化에 있어서는 단위체 濃度10 ∼ $30{\%}$에서 最高의 겔分率을 나타내었으며 겔化速度는 prepolymer의 未反應 에폭시基와 酸의 存在에 의하여 減少되었고 polyethyleneglycol dimethacrylate內의 polyethyleneglycol의 重合度가 增加함에 따라 增加하였다. 窒氣中과 空氣中에서 겔化速度는 별다른 差異가 없었으나 生成物 性質의 差異로 보아 硬化時의 酸素의 影響은 상당히 컸으며 polyethyleneglycol dimethacrylate類를 단위체로 使用時는 더욱 그러하였다.

• Journal of Periodontal and Implant Science
• /
• 제45권4호
• /
• pp.136-144
• /
• 2015

Purpose: The objective of this study was to comparatively assess the bone regenerative capacity of absorbable collagen sponge (ACS), biphasic calcium phosphate block (BCP) and collagenated biphasic calcium phosphate (CBCP) loaded with a low dose of recombinant human bone morphogenetic protein-2 (rhBMP-2). Methods: The CBCP was characterized by X-ray diffraction and scanning electron microscopy. In rabbit calvaria, four circular 8-mm-diameter defects were created and assigned to one of four groups: (1) blood-filled group (control), (2) rhBMP-2-soaked absorbable collagen sponge (0.05 mg/mL, 0.1 mL; CS group), (3) rhBMP-2-loaded BCP (BCP group), or (4) rhBMP-2-loaded CBCP (CBCP group). The animals were sacrificed either 2 weeks or 8 weeks postoperatively. Histological and histomorphometric analyses were performed. Results: The CBCP showed web-like collagen fibrils on and between particles. Greater dimensional stability was observed in the BCP and CBCP groups than in the control and the CS groups at 2 and 8 weeks. The new bone formation was significantly greater in the BCP and CBCP groups than in the control and CS groups at 2 weeks, but did not significantly differ among the four groups at 8 week. The CBCP group exhibited more new bone formation in the intergranular space and in the center of the defect compared to the BCP group at 2 weeks, but a similar histologic appearance was observed in both groups at 8 weeks. Conclusions: The dose of rhBMP-2 in the present study enhanced bone regeneration in the early healing period when loaded on BCP and CBCP in rabbit calvarial defects.

• 한국수정란이식학회지
• /
• 제24권1호
• /
• pp.65-69
• /
• 2009

The aim of the present study was to investigate the cleavage pattern, its developmental ability and apoptosis of porcine embryo in vitro. Morphology data on a total of 919 embryos were analyzed retrospectively. Forty-eight hours after insemination, embryos were classified into five groups based on the cleavage state as follows; 1 cell, 2 cell, 4 cell, 5 to 8 cell and fragmentation. These groups were cultured another 120 hours and then evaluated for blastocyst formation. Blastocyst formation rates were significantly higher in 4 cell (42.5%) and 5 to 8 cell (48.6%) cleaving groups than in other groups (p<0.05). On the other hand, 2 cell and fragmentation groups produced 4.9% and 3,9% blastocysts, respectively. And we could verify that in the event of 2 cell block and fragmentation of embryo. To analyze the apoptotic frequency in preimplantation development of porcine IVF embryos, all cells of each blastocyst were performed by TUNEL assay. There were no significantly differences in the total cell numbers of embryos and apoptotic cell rate in blastocysts among the each classified groups. Data suggest that 4 cell and 5 to 8 cell cleaving embryos at 48 hour after insemination have high developmental competence, and may be an useful parameter to predict the development of preimplantation embryos and to study using preimplanation embryonic research.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.14-23
• /
• 2015

Alzheimer's disease is one of the most common types of degenerative dementia. As a considerable cause of Alzheimer's disease, neurotoxic plaques composed of 39 to 42 residue-long amyloid beta($A{\beta}$) fibrils have been found in the patient's brain in large quantity. A previous study found that erythrosine B (ER), a red color food dye approved by FDA, inhibits the formation of amyloid beta fibril structures. Here, in an attempt to elucidate the inhibition mechanism, we performed molecular dynamics simulations to demonstrate the conformational change of $A{\beta}40$ induced by 2 ERs in atomistic detail. During the simulation, the ERs bound to the surfaces of both N-terminus and C-terminus regions of $A{\beta}40$ rapidly. The observed stacking of the ERs and the aromatic side chains near the N-terminus region suggests a possible inhibition mechanism in which disturbing the inter-chain stacking of PHEs destabilizes beta-sheet enriched in amyloid beta fibrils. The bound ERs block water molecules and thereby help stabilizing alpha helical structure at the main chain of C-terminus and interrupt the formation of the salt-bridge ASP23-LYS28 at the same time. Our findings can help better understanding of the current and upcoming treatment studies for Alzheimer's disease by suggesting inhibition mechanism of ER on the conformational transition of $A{\beta}40$ at the molecular level.

• Macromolecular Research
• /
• 제15권2호
• /
• pp.95-99
• /
• 2007

The most recent developments in two areas: (a) synthesis of inorganic particles with control over size and shape by polymer additives, and (b) synthesis of inorganic-polymer hybrid materials by bulk polymerization of blends of monomers with nanosized crystals are reviewed. The precipitations of inorganics, such as zinc oxide or calcium carbonate, in presence and under the control of bishydrophilic block or comb copolymers, are relevant to the field of Biomineralization. The application of surface modified latex particles, used as controlling agents, and the formation of hybrid crystals in which the latex is embedded in otherwise perfect crystals, are discussed. The formation of nano sized spheres of amorphous calcium carbonate, stabilized by surfactant-like polymers, is also discussed. Another method for the preparation of nanosized inorganic functional particles is the controlled pyrolysis of metal salt complexes of poly(acrylic acid), as demonstrated by the syntheses of lithium cobalt oxide and zinc/magnesium oxide. Bulk polymerization of methyl methacrylate blends, with for example, nanosized zinc oxide, revealed that the mechanisms of tree radical polymerization respond to the presence of these particles. The termination by radical-radical interaction and the gel effect are suppressed in favor of degenerative transfer, resulting in a polymer with enhanced thermal stability. The optical properties of the resulting polymer-particle blends are addressed based on the basic discussion of the miscibility of polymers and nanosized particles.