• 한국터널지하공간학회 논문집
• /
• 제3권2호
• /
• pp.3-12
• /
• 2001

본 논문은 절리암반 터널의 안정성 해석을 위한 2차원 개별요소모델링방법에 대한 개선방안을 제안하였다. 먼저, 절리군과 터널의 상대방위를 고려하여 터널단면상에서 불연속거동이 가능한 절리군을 구별하는 기준을 제시하였다. 이 기준에 따라 불연속거동이 가능한 절리군은 개별요소(암석블록)의 변이 되도록 하고 그 외 절리군은 암석블록의 탄성특성을 보정하는 방법을 제시하였다. 또한, 주어진 절리의 기하학적 특성에 대해서 절리의 방위편차와 유한길이를 고려한 복잡한 모델과 절리의 평균방위와 무한길이를 고려한 단순한 모델의 특성을 분석하였다. 그 결과, 후자의 모델이 일관성 있는 터널의 국부적 파괴양상과 명료한 암반의 불연속거동을 보여줌으로써 터널설계목적에 적절함을 확인하였다.

• 한국항행학회논문지
• /
• 제22권3호
• /
• pp.179-188
• /
• 2018

항공전자 시스템의 개발할 때 항공 사고를 예방하기 위해서 SAE ARP4761 (민간 항공 시스템 및 장비 안전성 평가 프로세스 수행 방법 및 지침) 규격에 명시된 안전성 분석 및 평가를 수행한다. 안전성 분석은 시스템의 정상상태가 아닌 비정상상태에 대한 지식과 다른 규격들 간의 상호 연관성에 대한 지식이 요구된다. 때문에, 안전인증규격의 준수를 입증하는 자료를 자동으로 출력하는 도구가 필요하다. 본 연구는 규격의 안전성 분석 절차를 도식화하고, 안전 분석 CAD 도구들을 개별 절차에 적용하는 방법을 연구하였다. 예시 연구로서, ARP4761 부록의 여객기용 휠 제동 시스템 (WBS; wheel brake system)을 대상으로 ARP4761분석을 수행하였다.

• The Korean Journal of Pain
• /
• 제19권2호
• /
• pp.288-291
• /
• 2006

Epidural analgesia using an epidural catheter is an effective method to relieve the pain during the rehabilitating procedure for postoperative orthopedic patients. Total spinal anesthesia is one of the possible complications of epidural catheterization which can lead to a life-threatening condition. Achondroplasia is the most common form of short-limbed dwarfism resulting from a failure of endochondral bone formation. In patients suffering with short stature syndrome like achondroplasia, the incidence and risk of total spinal anesthesia during epidural anesthesia may increase because of the technical difficulty and structural anomaly of the spine. We report here on a 35-year old female patient with a height of a 115 cm. She was diagnosed as achondroplasia and she had a previous Ilizarov operation; both tibial lengthening and correction of valgus were done. No specific event occurred during epidural catheterization. Immediately after the injection of a test dose via epidural catheter, the patient became hypotensive, drowsy and showed weakness of both her upper and lower extremities. The symptoms were disappeared after 40 minutes. The catheter was removed on the next day. We concluded that the total spinal anesthesia was caused by intrathecal injection of local anesthetics through the epidural catheter, and the anesthesia then migrated into the subarachonoid space.

• Journal of Chest Surgery
• /
• 제19권4호
• /
• pp.618-626
• /
• 1986

Univentricular heart is a rare congenital cardiac anomaly in which the atrial chambers are connected to only one ventricular chamber and it consists of a diverse group of cardiac malformation characterized by both AV valves or a common AV valve opening into the same ventricle, or the presence of only a solitary AV valve. In spite of recent development in cardiac surgery, corrective operations for univentricular heart still have high mortality and complication rate. Twenty eight patients underwent corrective operation for univentricular heart at Department of Thoracic and Cardiovascular Surgery, Seoul National University Hospital from February 1979 to July 1986. Of the 28 patients, 7 patients were operated on by ventricular septation and 21 patients by modified Fontan operation. Of the 28 patients, 19 patients were male and 9 patients female and ages ranged from 5 months to 18 years old with the average age of 7.3 years. There were 2 mortalities in 7 patients operated on by septation with the mortality rate of 28.6% and 5 complications, 3 complete AV block, 1 low cardiac output and 1 arrhythmia. All survived patients are being followed up without specific problem till now. There were 10 mortalities in 21 patients operated on by modified Fontan operation with the mortality rate of 47.6% and 10 complications, 2 low cardiac output, 2 respiratory failure necessitating tracheostomy, 2 persistent cyanosis, 2 arrhythmia, 1 missing of left AV valve in situs inversus patient due to misdiagnosis and one rupture of closed right AV valve. Incremental risk factors for operative mortality are young age less than 5 years old, anomalous pulmonary and systemic venous drainage and atrial septation procedure. In 11 survived patients, 9 patients show good follow-up results but one patient complains of persistent cyanosis and another one patient is suffered from CHF. In our series, results of corrective operation for univentricular heart shows continuing improvement but still high mortality and complication rate. So there must be continuing improvement in surgical result by selection of patient, by adequate decision making for timing and method of operation and by improving operative methods.

• Structural Engineering and Mechanics
• /
• 제88권2호
• /
• pp.169-178
• /
• 2023

Lightweight aggregate concrete (LWAC) has various advantages, but it has limitations in ensuring sufficient ductility as structural members such as reinforced concrete (RC) columns due to its low confinement effect of core concrete. In particular, the confinement effect significantly decreases as the axial load increases, but studies on evaluating the ductility of RC columns at high axial loads are very limited. Therefore, this study examined the effects of concrete unit weight on the seismic performance of RC columns subjected to constant axial loads applied with different values for each specimen. The column specimens were classified into all-lightweight aggregate concrete (ALWAC), sand-lightweight aggregate concrete (SLWAC), and normal-weight concrete (NWC). The amount of transverse reinforcement was specified for all the columns to satisfy twice the minimum amount specified in the ACI 318-19 provision. Test results showed that the normalized moment capacity of the columns decreased slightly with the concrete unit weight, whereas the moment capacity of LWAC columns could be conservatively estimated based on the procedure stipulated in ACI 318-19 using an equivalent rectangular stress block. Additionally, by applying the section lamina method, the axial load level corresponding to the balanced failure decreased with the concrete unit weight. The ductility of the columns also decreased with the concrete unit weight, indicating a higher level of decline under a higher axial load level. Thus, the LWAC columns required more transverse reinforcement than their counterpart NWC columns to achieve the same ductility level. Ultimately, in order to achieve high ductility in LWAC columns subjected to an axial load of 0.5, it is recommended to design the transverse reinforcement with twice the minimum amount specified in the ACI 318-19 provision.

• 융합신호처리학회논문지
• /
• 제16권2호
• /
• pp.74-82
• /
• 2015

본 논문에서는 BM 활성수를 생산하는 BM 활성수 플랜트 공정 제어시스템 모델을 제안하고, 다음과 같은 기능을 가진 BM 활성수 플랜트 공정 제어기를 개발 하였다. 첫 번째 기능으로는 먼저 부로와가 과부하가 걸렸을 때, 과전류 감지기가 동작하여 일정시간 부로와를 정지시킨 후 재 기동 하도록 하였다. 두 번째는 정전시 유도조에서 퇴비투입조로의 순환을 막기 위해 전동밸브가 정전시 자동으로 닫히는 기능을 부가함으로서 볼밸브의 고장으로 인한 퇴비투입조의 누수를 막을 수 있다. 세 번째는 생산된 활성수를 농축조에서 4개의 저장조로 자동으로 이송할 수 있는 기능을 부가하여 활성수 생산량을 자동 관리 하였다. 그리고 BM 활성수 플랜트 공정제어기 신호측정 시험장치를 개발하여 제작한 BM 활성수 플랜트 공정 제어기가 설계한 사양대로 잘 동작하는지 확인 하였다. 본 연구는 BM 활성수 플랜트 공정제어기를 견실한 저가의 시퀀서 제어방식 기반의 공정 제어기를 개발하여 시스템의 안정성과 효율성의 향상 및 운전관리 비용의 절감을 꾀할 수 있으리라 기대된다.

• 지질공학
• /
• 제11권3호
• /
• pp.303-313
• /
• 2001

연구지역은 경기도 남양주시 화도읍 구암리 부근 절개면으로 2000년 8월 28일 400mm이상의 집중호우시 붕괴가 발생한 곳이다. 붕괴절개면은 경사가 40$^{\circ}$ (1:1.2)로 도로설계기준을 충분히 만족함에도 불구하고, 구성암석 내에 발달하는 불연속면을 따라 암괴가 이동되어 붕괴된 현장이다. 본 연구목적은 당 절개면의 붕괴원인 규명을 위한 불연속면 자료수집 과정에서 발생하는 불연속면의 조사방법에 따른 상관성에 대한 비교검토로서, 현장조사에 의하여 절개면 법면에 나타나는 불연속면의 육안관찰 및 구성암석의 지질학적인 특성을 조사하고, 절개면 붕괴와 관련되는 불연속면의 방향성을 분석하였다. 광역적 범위에서 취할 수 있는 선구조는 항공사진을 통하여 자료를 추출하였으며, 방향성을 분석하였다. 광역적 범위에서 취할 수 있는 선구조는 항공사진을 통하여 자료를 추출하였으며, 지표면 하에 불연속면 자료는 시추조사 및 시추공영상촬열(Borehole Image Processing System, BIPS)에 의해 나타난 불연속면 방향성을 수집하였다. 조사방법에 따라 불연속면의 상관관계에 대하여는 스피어맨 순위상관관계를 이용하여 상관성을 도출하였으며, 그 결과 상관계수는 ${\gamma}_s$ = 0.91에 해당되어 상관성이 있는 것으로 나타났다. 또한, 분석된 불연속면의 방향성을 토대로 하반구 등면적 투영망을 통한 안정성 해석을 실시한 결과, 평면파괴에 대하여 불안정한 상태에 해당되는 것으로 나타났다. 본 절개면에 대하여는 절개면 안정화에 대한 대책으로 기존의 경사도 완화뿐만 아니라 불연속면의 방향성에 대한 근본적인 대책이 마련되어야 할 것으로 판단된다.

• 한국사회복지학
• /
• 제1권
• /
• pp.51-71
• /
• 1979

During last five years several workshops and seminars among social work educators, in and out country, has taken place. In those gatherings there has been, criticism on American model on which curriculum of social work in Korea has mainly based, and many proposals which most developing countries should consider and adopt for developing their own curriculums. The proposals could be summarized as follows; 1. Specification of developmental functions of social work should be made so that the curriculum could involve. It also must come from own societal needs and own national development task. 2. Social work should participate and make contribution to plan and solve the main social problems in own countries. 3. Clarification of educational objective in undergraduate level should be made and one of them must be related to the first professional degree. 4. There should be the courses which provide the content of macro level participation. How much of the proposals are reflected in the current curriculum of Korea? What are the problems Korean social work education has been faced in connection with reflecting the proposals? What kinds of task we should or could perform in order to adopt the proposals? These are the questions which deserved to be studied. The followings are the answers to the questions; 1. The new courses such as social welfare policy and planning, Social Development, Population Dynamics and Family Planning, Social problems, Special Issues in Social Welfare, etc, are placed in the curriculum. 2. Though the new courses are added the courses of case work, group work, and community organization are strongly remained it means that integrative method is not quite adopted and that conflicts are taking place between new and old fashion. 3. Fieldwork placement policy has been changes from concurrent to block and from social work method oriented to social problem oriented. 4. There are lack of integration among the all courses, of consistency between pre and post courses and connection among the related courses. 5. Establishment of image of social worker with B, A. degree should be urgently taken place. It can't be done by social work field alone but by cooperation with all the forces related to the social work practice. 6. B. A. graduate should have a common base of knowledge and competence. It could be come from the clear and specified objectives of undergraduate level education. And agreement among the member schools on the objectives can call on the fundamental similarities in each curriculums. Different programs from one school to another can be tolerated as long as there are fundamental similarities among the schools. Basic concepts and framework of social work should be kept clearly. It is a slow and long process to make social work recognized as a profession in the developing countries. Korea can't be and exception. Failure of having social work be indegenous can't be the reason to refuse an change the basic concepts of social work. One of he most important task which social work education in Korea must achieve in the near future is to establish the minimum requirement courses in the curriculum. Social work field, on the other hand, must find the positions for the social works in the various settings and institute. Clear role and image of social worker can be obtained by doing that.

• 대한치과보철학회지
• /
• 제61권3호
• /
• pp.189-197
• /
• 2023

목적. 절삭 및 적층 가공 방식으로 제작한 임시 보철물 레진 블록과 재이장용 자가중합레진의 전단결합강도를 비교 평가하고자 하였다. 재료 및 방법. 레진 블록 시편의 제작방식에 따라 4개의 군으로 나누었고 subtractive manufacturing (SM), additive manufacturing stereolithography apparatus (AMS), additive manufacturing digital light processing (AMD), conventional self-curing (CON)의 방식으로 각 20개씩 레진 시편을 제작하였다. 제작 방식에 따른 레진 블록 시편과 재이장용 자가중합레진의 결합을 위해 시편의 표면에 실리콘 몰드를 이용하여 동일한 위치에 재이장 레진을 주입하여 중합하였다. 만능재료시험기를 이용하여 전단결합강도를 측정하였고 주사전자현미경으로 접착 계면의 파절 양상을 확인하였다. 실험군 간 비교를 위해 일원배치 분산분석과 사후 검정으로 Tukey test를 실시하였다(α = .05). 결과. 전단결합강도는 CON, SM, AMS, AMD군 순으로 높았다. CON군은 AMS군, AMD군과 유의한 차이가 있었고(P < .01) SM군과 유의한 차이가 없었다(P > .05). SM군은 AMD군과 유의한 차이가 있었고(P < .01) AMS군과 유의한 차이가 없었다(P > .05). AMS군은 AMD군과 유의한 차이가 있었다(P < .001). 파절 양상은 CON군, AMS군에서 혼합 파절이 높은 빈도로 나타났으며 SM군, AMD군에서 접착 파절이 높은 빈도로 나타났다. 결론. 절삭 및 적층 가공 방식으로 제작한 임시 보철물 레진 블록과 재이장용 자가중합 레진과의 전단결합강도에서 절삭 가공 방식(SM군)은 CON군보다 낮은 결합강도를 보였지만 유의한 차이를 보이지 않았다. 적층 가공 방식(AMS군, AMD군)은 CON군보다 유의하게 낮은 결합강도를 보였으며, AMD군이 가장 낮은 결합강도를 보였고 AMD군은 SM군과도 유의한 차이를 보였다.

• 대한치과기공학회지
• /
• 제34권2호
• /
• pp.95-103
• /
• 2012

Purpose: Fracture strength of all-ceramic 3-unit fixed partial dentures manufactured by CAD/CAM and copy-milling systems were evaluated. Methods: Zirconia cores were made by milling the pre-sintered zirconia block by CAD/CAM or copy milling method followed by subsequent sintering. By building-up the corresponding porcelains on the core, all-ceramic bridges were fabricated, and those were evaluated in comparison with PFM fixed partial denture. Results: During the flexural test of the 3-unit PFM bridge, the porcelain started to chip or break at 507.28(${\pm}62.82$)kgf and the metal framework did not break until the maximum load level of 800kgf which was set in the testing instrument of this study. However, among all-ceramic restoration test groups, Everest(EV) group showed a peeling off or breakage of the porcelain from 365.64(${\pm}64.96$)kgf and the core was broken at 491.77(${\pm}55.62$)kgf. Those values of Zirkonzahn(ZR) were 431.03(${\pm}58.47$)kgf and 602.74(${\pm}48.44$)kgf, respectively. The break strength of the porcelain of PFM(PM) group was significantly higher than that of EV (p<0.05) group and there was no significant difference when comparing to that of ZR (p>0.05). ZR group showed higher break strength than that of EV group however there was no significant difference (p>0.05). The break strength of cores were in the increasing order of EV < ZR < PM (p<0.05). Conclusion: We could find that even though the PM group fractured at much higher value than all-ceramic cores, the breakage values of the porcelain of PM group with crack formation or delamination, which will be regarded as clinical failure, was significantly higher than that of EV group and not significantly higher than that of ZR group at p-values of 0.05. The break strength of ZR group was higher than that of EV group at an insignificant level(p>0.05).