• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.47-52
• /
• 2005

In this paper we describe SLA metrics and software architecture for newly upcoming IP TV service. Firstly we show the general description for IP TV. This consists of brief description of IP TV, the general figure of configuration and elements of IP TV network and communication protocol stack of IP TV data transmission for deriving communication quality parameter. And we propose SLA metrics depending on quality measurement point. According to the measurement point the measurable SLA metrics are different. The total view of the IP TV SLA measurement and management architecture is shown. When the quality measurement point is the routers that consist of internet node, the IP media NMS is the quality collection system. And when the quality measurement point is the IP TV STB(Set-Top Box), the IP media collector and Quality Collection Server are the quality collection system. And we show the software block diagram of IP TV SLA processing system and the other related network management systems.

• 전기학회논문지
• /
• 제59권4호
• /
• pp.779-787
• /
• 2010

In this paper, We introduce electrical tracking generated from surface activity associated with flow of leakage current on insulator under wet and contaminated conditions and design electrical tracking pattern recognition system by using LabVIEW. We measure the leaking current of contaminated wire by using LabVIEW software and the NI-c-DAQ 9172 and NI-9239 hardware. As pattern recognition algorithm and optimization algorithm for electrical tracking system, neural networks, Radial Basis Function Neural Networks(RBFNNs) and particle swarm optimization are exploited. The designed electrical tracking recognition system consists of two parts such as the hardware part of electrical tracking generator, the NI-c-DAQ 9172 and NI-9239 hardware and the software part of LabVIEW block diagram, LabVIEW front panel and pattern recognition-related application software. The electrical tracking system decides whether electrical tracking generate or not on electrical wire.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.213-215
• /
• 2003

The continuing need for more compact and reliable switching power supplies have aroused a renewed interest in a well founded control technique the Magnetic Amplifier(Magamp). Magamp have some advantages of higher power density simple control circuit, good regulation, high frequency and high performance. The control method with magamp become attractive solutions for high current post regulated output applications. In this study, it is proposed that the magamp technique in flyback converters with multiple output windings. Operation principle of the proposed approach is described and a description of magamp control loop behavior is given first from a circuit level point of view. Then the focus is shifted to look at the same issue from the block diagram point of view. Experimental verifications on 50W multiple output flyback converter are conducted. Simulations and experimental results show that the proposed approach is high efficiency and voltage regulation of the auxiliary output is excellent.

• 산업공학
• /
• 제4권1호
• /
• pp.71-81
• /
• 1991

Presented in this paper is a systematic approach to "modeling and simulation' of flow lines in mass production systems, using a tire trimming line as an example. The "modeling phase" consists of 1) generation of alternative line configurations, 2) construction of a reference model for each alternative, and 3) formal description of the target system. ACD(Activity Cycle Diagrams) are employed as a tool for formal description. In the "simulation phase'. block diagram models (provided by the simulation language SIMAN) and the next event methodology(implemented in FORTRAN 77) are combined in order to fully describe the flow line behavior.

• International Journal of Aeronautical and Space Sciences
• /
• 제4권2호
• /
• pp.37-50
• /
• 2003

A next generation small satellite HAUSAT-1, the first picosatellite developed in Korea, is being developed as one of the international CubeSat program by Space System Research Lab. of Hankuk Aviation University. A fault-tolerant incremental design methodology has been addressed in this paper. In this study, the effect of system redundancy on reliability was in details analyzed in accordance with the implementation of fault-tolerant system. Four different system recovery levels are proposed for HAUSAT-1 fault-tolerant system optimization. As a result, the HAUSAT-1 fault-tolerant system architecture design and reliability analysis has acquired about 11% reliability improvement.

• 기술혁신학회지
• /
• 제4권2호
• /
• pp.157-171
• /
• 2001

This paper discusses the economics of local loop architecture focusing on existing technologies, ADSL, HFC, and new one, PLC, and suggests a new modeling approach of access network system and the numerical equations. To modelize access network system and drive the numerical equations, we consider the double star and the tree & branch architecture and made block diagram of each access system. In addition, we introduce the density of subscriber as a variable and the equation of seeking the optimal number of cell in a service area. The economics of local loop architecture is analyzed in two ways, i.e. with and without consideration of the cost of cable and infrastructure. From the numerical analysis, we find that in case of not including the cost of cable and infrastructure, there is no much difference in the cost per one subscriber, while, in case of including it, there is remarkable difference among technologies. Therefore we conclude that the economics of local loop architecture is depend on the density of subscriber and existing network infrastructures.

• 시스템엔지니어링학술지
• /
• 제10권1호
• /
• pp.73-80
• /
• 2014

Designing test case flows for water crossing operation of a wheeled vehicle is a new attempt for which very limited experiences exist. In this paper, a Function Flow Block Diagram(FFBD) and a Classification Tree Method(CTM) were combined to see if this method is viable to generate the test case flows at the functional analysis stage. It was found that this method can be practically used for the very complicated test case generation.

• 조명전기설비학회논문지
• /
• 제27권4호
• /
• pp.23-30
• /
• 2013

Reliability Centered Maintenance(RCM) is one of most widely used methods in the modern power system to schedule a maintenance cycle and determine the priority of inspection. A precedence study for the new structure of rearranged system should be performed due to introduction of additional installation. This paper proposes a new method to evaluate the priority of maintenance and inspection of the power system facilities. In order to calculate that risk index, it is required that the reliability block diagram should be analyzed for the power system. Additionally, a fault cause analysis is also performed through the event-tree analysis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.279-282
• /
• 2004

This paper presents load torque observer that is used to deadbeat load torque observer in the induction motor position control system. The simulation has been obtained by simulink. A digital control is composed by trigger method in the continuous block diagram. The results show that proposed system has good effectiveness for the disturbance in induction servo motor system.

• 한국경영과학회지
• /
• 제14권1호
• /
• pp.88-96
• /
• 1989

General measure in the reliability is the k-terminal reliability, which is the probability that the specified vertices are connected by the working edges. To compute the k-terminal reliability components are usually assumed to be statistically independent. In this study the modeling and analysis of the k-terminal reliability are investigated when dependency among components is considered. As the size of the network increases, the number of the joint probability parameter to represent the dependency among components is increasing exponentially. To avoid such a difficulty the structured-event-based-reliability model (SERM) is presented. This model uses the combination of the network topology (physical representation) and reliability block diagram (logical representation). This enables us to represent the dependency among components in a network form. Computational algorithms for the k-terminal reliability in SERM are based on the factoring algorithm Two features of the ractoring algorithm are the reliability preserving reduction and the privoting edge selection strategy. The pivoting edge selction strategy is modified by two different ways to tackle the replicated edges occuring in SERM. Two algorithms are presented according to each modified pivoting strategy and illustrated by numerical example.