• Journal of IKEEE
• /
• v.15 no.3
• /
• pp.235-240
• /
• 2011

The scattered pilots employed in DVB-T take advantage of the merits of both the block type and comb type pilot arrangement to increase the transmission efficiency. To estimate the channel transfer functions for data subcarriers, it is required to conduct time-frequency domain 2D estimation using the pilots. Though 2D Wiener estimator is optimal in sense of MSE (mean square error), it is too complex to implement in hardware. In this paper a new channel estimation method for the scattered pilot based OFDM system by measuring the power of AWGN and removing the noise in the LS (least square) estimate of the channel is proposed. And the simulation results reveal the proposed method outperforms the 2D linear interpolation in the fading channel.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.1
• /
• pp.29-39
• /
• 2011

With regard to steel construction, many studies have been performed to examine the structural behavior of the bolted connections domestically and in other countries. Especially, a domestic study was conducted on the block shear fracture and shear lag effect on the single-bolted angle connection in carbon steel. In this study, specimens were prepared with the end distance parallel to the loading direction and bolt arrangement ($1{\times}1$, $1{\times}2$), as the main variables. Then the fracture mode and the curling effect on the bolted angle connection in austenitic stainless steel were investigated. Moreover, the fracture mode and ultimate strength were compared, and the strength reduction by curling was estimated.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1149-1154
• /
• 2008

The present study investigates the heat transfer characteristics on concave surface with array impinging jet and fin arrangement. The heat transfer coefficients was measured by TLC method. The Reynolds number based on jet hole diameter is 10,000 and hole diameter-to-plate distance ratio (H/d) is fixed at 2. The rectangular fins are installed in the curved channel and the width of fin varies from 1d to 3d. Without fins, the averaged heat transfer coefficients decreases as moves downstream region. While, the rectangular fins block the crossflow and higher heat transfer rates were observed compared to smooth channel.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.2
• /
• pp.78-85
• /
• 2004

To manage rainwater environmentally friendly, it is necessary to let the rainwater be infiltrated naturally and make reservoirs to detain it in the chosen spot. Not only should it be prepared to handle the city flood, but also it be a necessary alternative for establishing the ecological water circular system in cities. Therefore, considering the present rainwater. management system, this study analysed the status of products which can be interchanged from existent systems to rainwater infiltrating systems. In this study, the infiltrating equipment that is applicable to the Korean drainage system was developed. The case was studied out to investigate the effects of infiltrating and the detaining ability of the developed product. The case site, block 6 of Sang-am residence, was selected and analyzed. The amount of infiltration and detention per unit of the introduced facilities, i.e., infiltrating pipes and tanks were calculated. In this research, the amount of each infiltrating tank was revealed to be 1.353 m/hr and the amount of detention as 0.299 m/hr. And the amount of each infiltrating pipe was found to be 0.541 m/hr and the amount of detention was 0.118 m/hr. To examine the effects of the system, the total amount of the outlet before and after installing was compared and calculated. In doing this, a basis for deciding the arrangement and number of tanks and pipes of the infiltrating system was made.

• Journal of Information Technology Services
• /
• v.10 no.1
• /
• pp.35-46
• /
• 2011

As development of exhibition, it has been an important issue to analyze exhibition for the next success of exhibition. A lot of existing researches have focused on the exhibitor's and visitor's satisfaction problem. However, the exhibitor's satisfaction and success of exhibition come from the analysis of exhibition in the network level. Booths composing exhibition are regarded as nodes in network, so the trace of visitors visiting booths can construct the arc of networks. The purpose of this study is to analyze the booth visiting pattern and components of network through social network analysis using data collected in the $17^{th}$ International KIDS & EDU EXPO for Children. This research is the first approach of network-leveled analysis of exhibition, and the result of network analysis is helpful to support the booth arrangement in next exhibition. Our analysis results the following implications. First, Booths with high degree centrality or betweenness centrality should be deployed in the wide space or corner of the exhibition hall. Finally, booths within a block should be deployed in the same space of the exhibition hall to provide convenience to the visitors and to enhance exhibition performance.

• Journal of Animal Science and Technology
• /
• v.64 no.3
• /
• pp.443-461
• /
• 2022

This study was conducted to assess the effects of the dietary supplementation of riboflavin (as a bile salt hydrolase [BSH] inhibitor) and Bacillus subtilis on growth performance and woody breast of male broilers challenged with Eimeria spp. Intestinal bacteria, including supplemented probiotics, can produce BSH enzymes that deconjugate conjugated bile salts and reduce fat digestion. A 3 × 2 × 2 (riboflavin × Bacillus subtilis × Eimeria spp. challenge) factorial arrangement of treatments in randomized complete block design was used. On d 14, birds were gavaged with 20× doses of commercial cocci vaccine (Coccivac^R -B52, Merck Animal Health, Omaha, NE). Dietary treatment of riboflavin and B. subtilis did not affect body weight (BW), body weight gain (BWG), and feed conversion (FCR) d 0 to 14 and overall d 0 to 41. Eimeria spp challenge reduced BWG, feed intake (FI), and increased FCR between d 14 to 28, but increased BWG and lowered FCR between d 28 to 35. There were no effects of the Eimeria spp. challenge on the overall d 0 to 41 FCR and FI, but BWG was reduced. Eimeria spp. challenge increased the abdominal fat pad weight and slight woody breast incidences on processed birds on d 42. Dietary inclusion of B. subtilis and riboflavin at tested levels did not help birds to mitigate the negative impact of Eimeria spp. challenge to enhance the growth performance.

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.2
• /
• pp.11-19
• /
• 2023

In this paper, we propose the methods of invoice document structure recognition and of making a spreadsheet electronic document. The texts and block location information of word blocks are recognized by an optical character recognition engine through deep learning. The word blocks on the same row and same column are found through their coordinates. The document area is divided through arrangement information of the word blocks. The character recognition result is inputted in the spreadsheet based on the document structure. In simulation result, the item placement through the proposed method shows an average accuracy of 92.30%.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.863-870
• /
• 2022

Unsatisfactory urban walking environment stresses urban residents, and may cause mental illness and chronic diseases by reducing walking activities. Therefore, establishing a high-quality walking environment that can promote walking activities in urban residents has emerged as an important issue. The walking environment consists of various components, such as trees, stairs, streetlights, benches, signs, fences, and facilities, and it is essential to understand which components and their settings act as satisfiers or dissatisfiers for pedestrians, to create a better quality walking environment. Therefore, this study investigated pedestrian satisfaction and dissatisfaction as a function of various environmental components through a survey using walking environment images. The results revealed that most of the walking environment components except the braille block and treezone exhibited significant correlations with pedestrian satisfaction. Particularly, safety-related component (e.g., adjacent roads, parked cars, traffic cushions, and car separation), and landscape-related components (e.g., trees and green), as well as the material settings of landscape facilities (e.g., wooden fences, benches, stairs, and walkway surfaces) correlated with pedestrian satisfaction. The results of this study can contribute to the extraction of useful features to evaluate pedestrian satisfaction as a function of the walking environment. The research outcome is expected to assist in the effective arrangement of walking environment components and their settings, which will ultimately contribute to significantly satisfactory walking environment and encourage walking activities.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.9
• /
• pp.397-406
• /
• 2017

In case of using the existing encrypted algorithm for massive data encryption service under the cloud environment, the problem that requires much time in data encryption come to the fore. To make up for this weakness, a partial encryption method is used generally. However, the existing partial encryption method has a disadvantage that the encrypted data can be inferred due to the remaining area that is not encrypted. This study proposes a partial encryption method of increasing the encryption speed and complying with the security standard in order to solve this demerit. The proposed method consists of 3 processes such as header formation, partial encryption and block shuffle. In step 1 Header formation process, header data necessary for the algorithm are generated. In step 2 Partial encryption process, a part of data is encrypted, using LEA (Lightweight Encryption Algorithm), and all data are transformed with XOR of data in the unencrypted part and the block generated in the encryption process. In step 3 Block shuffle process, the blocks are mixed, using the shuffle data stored with the random arrangement form in the header to carry out encryption by transforming the data into an unrecognizable form. As a result of the implementation of the proposed method, applying it to a mobile device, all the encrypted data were transformed into an unrecognizable form, so the data could not be inferred, and the data could not be restored without the encryption key. It was confirmed that the proposed method could make prompt treatment possible in encrypting mass data since the encryption speed is improved by approximately 273% or so compared to LEA which is Lightweight Encryption Algorithm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.761-770
• /
• 2017

The objective of this study is to propose a community facility design for the revitalization of the piloti spaces of deteriorated low-rise residential blocks. For this study, the precedent research and institutional limitations are examined. In addition, this study selected and analyzed a deteriorated low-rise residential block utilizing pilotis. Generally, in this type of residence, 8 to 10 generations live together in multi-family houses and row houses, so it is a type of housing that lacks both public space and parking places. Therefore, we attempted to improve the situation of the communities by making use of the space between the pillars and walls without infringing on the parking places. In addition, we took into consideration the design and arrangement of the piloti by evaluating the inconveniences and needs of the residents through interviews. Specifically, various modules were planned and used to transform the spaces between the pillars of the pillar type piloti structure. This study examined the possibilities offered by various materials and modules, and studied the diverse possibilities that can be offered by changing the modules.