• Journal of the Korean Home Economics Association
• /
• v.41 no.7
• /
• pp.185-200
• /
• 2003

The purpose of this study was to investigate the fitness using the draft method to develop moderate-stretch knit block pattern for young women in Korea. The subjects were three women within the range of the ages from 18 to 24 showing the average body figures. In this study, 4 different patterns were drafted for the moderate stretch knitted fabrics, that were categorised into two different types. The first type of these was made up for kilted fabrics and the other was initially drafted for woven fabrics and altered for knitted materials afterward. The major findings derived from this investigation were as follows; 1. According to each sensory evaluation for the appearance test on fitness, knit block patterns A and D were the better than the rest of them. 2. Knit block patterns A and D with higher evaluation scores were drafted with body size measurements except the waist line, whereas patterns B and C with relatively lower scores were produced including the smaller ease amounts than the woven block pattern. 3. To see the results of the functional test based on the designed ten motions for this experiment, knit block patterns A and B were concluded as better than the rest of them. In addition, concerning the arm liking motions, pattern B was scored as the best among the developed patterns.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.136-140
• /
• 2015

Linux environment that is commonly used at embedded systems supports various file systems as Ext2, FAT, NTFS, etc. The file system that is equiped on the embedded system is mostly implemented on mini hard disk or flash memory. The types of the file system of the system make an effect on the performance of a application programs. The factors of file system performance on a same media are block read, block write and block free time. On these factors, block read and block free time are not so different according to the type of file systems. This paper evaluates the performance benchmark of file systems supported by linux about block allocation and write performance. The results obtained from various experiments shows the characteristics of each file system.

• Journal of Nutrition and Health
• /
• v.51 no.6
• /
• pp.590-598
• /
• 2018

Purpose: This study was conducted to compare the food involvement scale (FIS) of American and Japanese consumers. In addition, the effects of familiarity, likability, and expectations on willingness to use intentions for block type sauce by nationality were evaluated. Methods: A total of 149 and 112 American and Japanese consumers, respectively, completed the survey. Consumers were asked about familiarity, likability, expectation, willing to use intention, and usage frequency of block type sauce, food involvement scale (FIS), and demographic information. Results: There were differences in the using frequency of block type sauce according to nationality, with consumers in Japan showing significantly higher frequency of using block type sauce than those in the United States (US) (p < 0.001). According to the FIS, US consumers were more focused on how to provide food than food, such as cooking process, table setting, and food shopping, compared to Japanese consumers. In addition, 'expectation' and 'likability' among US consumers and 'expectation' and 'familiarity' among Japanese consumers were positive attributes for willing to use intention (p < 0.01). Conclusion: In the case of the US consumers, 'familiarity' was not significant because the using frequency of the block type sauce was lower than that of Japanese consumers. In the case of the Japanese consumers, 'likability' was not significant because they enjoy cooking itself according to the FIS. Therefore, it is necessary to recognize positive attributes as a key factor for block type sauce, as well as to search for ways to apply marketing strategies based on attributes by nationality.

• IE interfaces
• /
• v.16 no.3
• /
• pp.311-321
• /
• 2003

We propose the improved channel assignment and management methods for an efficient use of traffic channel resource for supporting 12.2 Kbps, 64 Kbps, and 384 Kbps traffic with the different quality of service(QoS) in the radio network controller(RNC) in asynchronous IMT-2000 system. We consider two types of traffic channel block assignments for utilizing the traffic channel efficiently; the Completely Shared(CS) channel assignment and the Partially Dedicated and Partially Shared(PDPS) channel assignment. The former is that all traffic channel blocks are completely shared with all traffic types. The latter is that some traffic channel block is independently assigned to each traffic type and the other blocks are completely shared with some traffic type. We also propose the traffic channel management method which consists of the block and task management step, for efficiently assigning, releasing, and managing the channel resource. Finally, we evaluate the performance through various numerical examples when applying our proposed channel block assignment and resource management methods.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.2
• /
• pp.117-125
• /
• 1997

상계요소 해석(UBET) 프로그램은 비대칭 단조공정에서의 다이 충만과정과 단조 하중등을 예측하기 위하여 개발되었다. 보다 용이하게 단조 공정을 해석하기 위하여 비대칭 형상의 단조공정을 평면변형부(길이 부분)과 축대칭변형부(라운딩 부분)으로 나누었다. 평면변형부와 축대칭 변형부의 경계는 전단에너지를 고려하여 결합하는 빌딩 블록 방법(building block method)을 이용하였다. 그리고 본 연구의 비대칭 형상을 단조하는데 최적의 초기시편 형상으로 아령형의 시편(dumbbell-typed billet)을 제시하였다. 또한 실험은 상온에서 플라스티신을 사용하여 수행되었고 수치해석 결과와 실험결과는 비교적 잘 일치하였다.상계요소 해석(UBET) 프로그램은 비대칭 단조공정에서의 다이 충만과정과 단조 하중등을 예측하기 위하여 개발되었다. 보다 용이하게 단조 공정을 해석하기 위하여 비대칭 형상의 단조공정을 평면변형부(길이 부분)과 축대칭변형부(라운딩 부분)으로 나누었다. 평면변형부와 축대칭 변형부의 경계는 전단에너지를 고려하여 결합하는 빌딩 블록 방법(building block method)을 이용하였다. 그리고 본 연구의 비대칭 형상을 단조하는데 최적의 초기시편 형상으로 아령형의 시편(dumbbell-typed billet)을 제시하였다. 또한 실험은 상온에서 플라스티신을 사용하여 수행되었고 수치해석 결과와 실험결과는 비교적 잘 일치하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.4
• /
• pp.15-21
• /
• 2008

From the practical point of view, general retaining wall systems, such as gravity wall, cantilever wall and reinforced wall, have several problems. As a countermeasure, precast block type retaining wall systems have been developed and used for the various purposes of construction. The retaining wall systems can be applied not only for mechanical purpose but environmentally friendly aspects by changing the shapes of surface plates and planting on the surface plates. On the other hand, the bulging failure was dominant near the center of wall height. Therefore, an individual block has to be estimated for the stability problem related to turnover and the for design of gravity block type wall. On the basis of this result, the optimum section of the wall has to be determined.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1264-1269
• /
• 2008

We designed a track circuit of Tag in-tag out type that can be used for light rails and monorails. This method is called RFID-Tag and it literally uses RFID-Tag and replaces a fixed track circuit and implements a moving block. The distance between RFID-Tags is set to the length of a train and thus a train is always in contact with one of the tags. A train runs in RFID-Tag in -RFID-Tag out type at all times and the distance between trains can be precisely controlled through the application of a moving block combined with the basic principle of a fixed block, which enables the continuous speed control and enhances the satisfaction of passengers. When constructing a track circuit using RFID-Tag the Tag in-tag out brings us the cost reduction and is more economical than the existing fixed track circuit in that sense and easy for installation and maintenance. The wireless communication between onboard and wayside makes the continuous control possible and can improve the control capacity of ATP/ATO by the implementation of a moving block on top of a fixed one.

• Coupled systems mechanics
• /
• v.9 no.6
• /
• pp.539-562
• /
• 2020

In this paper the linear elastic coupling between a 2 degree of freedom shear-type frame system and a rigid block is analytically and experimentally investigated. As demonstrated by some of the authors in previous papers, it is possible to choose a coupling system able to guarantee advantages, whatever the mechanical characteristics of the frame. The main purpose of the investigation is to validate the analytical model. The nonlinear equations of motion of the coupled system are obtained by a Lagrangian approach and successively numerically integrated under harmonic and seismic excitation. The results, in terms of gain graphs, maps and spectra, represent the ratio between the maximum displacements or drifts of the coupled and uncoupled systems as a function of the system's parameters. Numerical investigations show the effectiveness of the nonlinear coupling for a large set of parameters. Thus experimental tests are carried out to verify the analytical results. An electro-dynamic long-stroke shaker sinusoidally and seismically forces a shear-type 2 d.o.f frame coupled with a rigid aluminium block. The experimental investigations confirm the effectiveness of the coupling as predicted by the analytical model.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.448-454
• /
• 2000

Piled multi-block system has been frequently adopted in the historic structures or monuments of cultural heritage. It is well known that such a structural system is very vulnerable to the earthquake shaking. If the structure is of slender type, then it may experience overturning at very low level intensity of ground shaking. One of the methods used to protect such structures from earthquake is seismic isolation system. But the behavior of multi-block systems mounted on the isolated basis is not well understood yet. In this paper we investigate the dynamic behavior of single slender rigid block mounted on the three different isolation systems, i.e., P-F system, FPS and LRB system. Sliding at the isolation interface of P-F system and FPS is formulated based on Coulomb friction. The mounted single block is assumed undergoing rocking or sticking only. Impacting of a single block is described using distinct element method (DEM). Free vibrations due to a prescribed initial conditions are studied. Responses to the harmonic excitation and earthquake motions are calculated

• Communications of the Korean Mathematical Society
• /
• v.13 no.3
• /
• pp.635-642
• /
• 1998

When an integrated communication system is congested, we may reserve some spaces for non-realtime traffic by discarding a part of realtime traffic. That is sensible because realtime traffic is insensitive to a few losses. Several discarding schemes have been developed including Separate Queue (SQ). Under such schemes, the block loss distribution, i.e., the distribution of the number of losses within a given block which consists of successive data of a type, is important. We derive the block loss distribution of the SQ scheme and modifies the SQ scheme with a threshold.