• 한국통신학회논문지
• /
• 제25권10B호
• /
• pp.1665-1674
• /
• 2000

This paper treats the interworking of LAN-based networks like TCP over the ATM protocol stack in an ATM multicast session. Multicast connection will cause CIP since multicast group members form a connection tree by some tree methods and share the connected tree. The paper solve the CIP problem through a block-by-block transmission using ABT/IT method. ABT/IT RM cell is modified and block scheduling algorithm considering the traffic types is applied to each ATM switch using the enhanced RM cell. Block scheduling algorithm will avoid the indiscriminate discard of UBR traffic when congestion occurs and it can provide an efficient and fair service. The paper builds a block scheduler system and suggests the block scheduling algorithm for a multicast session in an ATM switch. UBR traffics arriving at the switch trough each VC is classified by the traffic type and stored at class buffer and thereafter indisciminately transmitted. When block scheduling algorithm is applied it will improve the UBR traffic performance such as end-to-end delay cell block loss ration etc. This paper evaluated the performance of block scheduling algorithm through the simulation using the C language and data structure.

• 유공압시스템학회논문집
• /
• 제5권2호
• /
• pp.1-7
• /
• 2008

To improve the performance of the bent axis type axial piston pump driven by the tapered piston, it is necessary to know the driving characteristics and mechanism of the tapered piston and the cylinder block. Since each piston not only rotates on its axis and reciprocates in the cylinder bore, but also revolves around the axis of the driving shaft, it is difficult to analyze the driving mechanism theoretically. The theoretical mechanism far the bent axis type axial piston pump is studied by using the geometrical method. The driving range of the tapered piston is determined by theoretical equations. The results show that the cylinder block is driven by one tapered piston in a limited range and the core parameters such as driving factor of the piston and the ahead delay angle influenced performance of the bent axis type axial piston pump.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제20권3호
• /
• pp.225-242
• /
• 2016

The phase-type representation is strongly connected with the positive realization in positive system. We attempt to transform phase-type representation into sparse mono-cyclic positive representation with as low order as possible. Because equivalent positive representations of a given phase-type distribution are non-unique, it is important to find a simple sparse positive representation with lower order that leads to more effective use in applications. A Hypo-Feedback-Coxian Block (HFCB) representation is a good candidate for a simple sparse representation. Our objective is to find an HFCB representation with possibly lower order, including all the eigenvalues of the original generator. We introduce an efficient nonlinear optimization method for computing an HFCB representation from a given phase-type representation. We discuss numerical problems encountered when finding efficiently a stable solution of the nonlinear constrained optimization problem. Numerical simulations are performed to show the effectiveness of the proposed algorithm.

• 정보보호학회논문지
• /
• 제14권1호
• /
• pp.91-99
• /
• 2004

Iwata 등은 SPN 구조에 기반한 블록 암호들 중 Serpent에 대한 의사 난수성을 분석하였다. 그들은 Serpent의 구조를 최대한 보존한 상태에서 의사 난수성을 분석하기 위하여 Serpent의 Diffusion layer의 특성을 그대로 보존하여 일반화 한 후 이론을 전개하였다. 본 논문에서는 Serpent가 취한 Diffusion layer 뿐만 아니라 SPN 구조에 기반한 블록 암호들이 취할 수 있는 임의의 Diffusion layer에 대하여 적용 가능한 일반적인 이론을 도출해 낼 것이다. 또한 이러한 일반적인 이론을 Serpent, Crypton, Rijindael 등과 같은 블록 암호들에 적용한 결과를 제시할 것이다.

• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.23-28
• /
• 1998

To increase the efficiency of the hydraulic axial piston pumps, it is need to know the various characteristics in the sliding contact parts of them. Especially, friction characteristics between the cylinder block and the valve plate in the hydraulic axial piston pumps plays an important role to high power density. In this paper, we tried to clarify friction characteristics between the cylinder block and the spherical valve plate in bent-axis-type axial piston pump in experimentally. Results are arranged as follow; (1) friction torque between the cylinder block and the spherical valve plate has a proportional relation to weight or rotational speed, and is strongly affected by temperature. (2) Friction torque strongly depends on force balance ratio in valve plate. (3) In this experiment, lubrication condition between the cylinder block and the spherical valve plate is under hydrodynamic lubrication.

• 대한의용생체공학회:의공학회지
• /
• 제13권1호
• /
• pp.55-64
• /
• 1992

AB -type block copolymers of poly($\tau$-benzyl L-glutamate) (PBLG, a segment) and polyoxypropylene (POP, Bsegment) were synthesized and they were reacted with polyoxypropylene his(6-aminohexyl) (POE) to enhance the hydrophilicity of the poly- mers. The degree of swelling of the POE -crosslinked block copolymers (CPB -2) was higher than that of the block dopolymers (PB). The amount of 5-fluorouracil re- leased from CPB-2 block copolymers was greater than that from the PB block copol- ymers when they were incubated in the same period. These results indicate that the amount of 5-fluorouracil released from the matrices is proportional to the hydrophilicity of the polymers. Observing polymer surfaces by scanning electron mi- croscope, pores (diameter ; $0.5-1.5{\mu}$m) were appeared on the surface of CPB-2

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.81-82
• /
• 2006

In this study, the applications of the block copolymer thin films are introduced. For this purpose, we first obtained cylindrical nanodomains in polystyrene-block-poly(methyl methacrylate) copolymer perpendicularly oriented to a substrate. Then, nanoporous templates were prepared after removing the PMMA nanodomains by UV treatment. By using electropolymerization, high density nanowire arrays of conducting polymer of poly(pyrrole) and poly( 3-hexyl thiopene) were obtained and their electric properties were measured. Also, these nanoporous thin films were found to be very useful for the separation of human Rhinovirus type 14 (HRV 14), major pathogen of a common cold in humans, from the buffer solution.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.249-255
• /
• 1998

To increase the efficiency of the hydraulic axial piston pumps, we have to know the various characteristics in the sliding parts of them. Especially, friction characteristics between the cylinder block and the valve plate in the hydraulic axial piston pumps plays an important role to high power density. In this paper, we tried to clarify friction characteristics between the cylinder block and the spherical valve plate in bent-axis-type axial piston pump by using of modeling experiment. The main results of this study are these; (1) Friction torque between the cylinder block and the spherical valve plate has a proportional relation to weight or rotational speed, and is strongly affected by temperature. (2) Friction torque strongly depends on force balance ratio. (3) In this experiment, lubrication condition between the cylinder block and the spherical valve plate is under hydrodynamic lubrication.

• 대한가정학회지
• /
• 제39권12호
• /
• pp.177-188
• /
• 2001

The purpose of this study is to investigate the fitness according to drafting method of the block patterns for women in Korea. The major findings of this study are as follows: 1. According to each sensory test of the frontal view, back view, side view and silhouette Block Pattern I is the best of them in summation of the sensory tests score. Block, Pattern D and I have good shape too. However the best block Pattern D shows good score in evaluation of overall fitness and silhouette. 2. Most of block patterns, which show high scores in sensory tests, are the Compromise Method taking merits of the Proportional Method and Short Measure Method among the Pattern Drafting Methods. Box-shape patterns show low score in the sensory tests. 3. Regarding to the number of measurement, the patterns of the Compromise Method using 6-8 measurements seem to be optimal. In degree of fitness, loose fit type basic patterns are better than other patterns from a viewpoint of the total satisfaction.

• 한국환경복원기술학회지
• /
• 제7권6호
• /
• pp.19-28
• /
• 2004

Segmental Retaining Wall(SRW) has been variously applying in Civil and Architecture construction. Recently, the application of environmental element in all type's structures came to essential requirement, and the construction cases of retaining wall using reinforced soil and block are more increased than the past. But, this trend more widely was spread environmental element as landscape work for the backside of reinforced retaining wall as well as block itself. New environmental block, Greenstone Block, developed to apply of this tendency. The retaining wall system using Greenstone can be environmental constructing at both block itself and backside of retaining wall. The material tests, the axial compressive strength test of block and bending test of fiber-pipe, exercised to design and construction of vertical SRW, which were satisfied NCMA standard. Through this procedure, Rewall (ver 1.0) was developed, which can be automation design of SRW including internal stability, external stability and local stability. And these can be considered setback of retaining wall, as well the examples of vertical retaining wall using block presented to satisfying the follows; strength of reinforced geotextile, height of retaining wall, surcharge, types of backfill and groundwater level etc. Many problems investigated on after or before of construction were due to local failure, insufficiency of bearing capacity and groundwater level. Especially, the local failure was many occurred to during compaction or after construction, and the cases of SRW construction is similar to the results of model test on vertical SRW.