• Macromolecular Research
• /
• v.17 no.9
• /
• pp.697-702
• /
• 2009

Mesoporous ethanesilica thin film was prepared using PEO-PLGA-PEO triblock copolymers as structure-directing agents and (1,2-bis(triethoxysilyl) ethane BTESE; bridged organosilicates) as inorganic precursors via one-step sol-gel condensation of ethanesilica precursors. The mesostructure of ethanesilica films is critically dependent on the processing experimental parameters after the hydrolyzed silica sol mixture was spin-cast. This study examined the effects of the block copolymer template/organosilica precursor ratio in the casting solution and aging period before calcination of the mesostructure. It was further demonstrated that mesoscopic ordering of organosilicate thin films is induced by the rearrangement of block copolymer template/organosilica hybrid during thermal decomposition of the PEO-PLGA-PEO triblock copolymer. The mesoporous structure and morphology were characterized by SAXS, TEM and solid-state NMR measurement.

• The Journal of Engineering Research
• /
• v.2 no.1
• /
• pp.5-11
• /
• 1997

The flow of granular materials is common to many industrial processes. This paper discusses a methodology which utilizes high speed digital imaging to measure velocity of dry granular solids flowing down an inclined chute under the action of gravity. Glass particles have been used as granular solids in our experiment. The proposed technique utilizes block matching for spatially averaged velocity measurements of the glass particles. The velocity measurements are refined to the subpixel resolution by the variance normalized correlation with interpolation.

• Structural Engineering and Mechanics
• /
• v.54 no.5
• /
• pp.999-1016
• /
• 2015

In this paper, we introduce a new method for assembly of shipbuilding blocks at sea and present its feasibility focusing on structural safety. The core concept of this method is to assemble ship building blocks by use of bolting, gluing and welding techniques at sea without dock facilities. Due to its independence of dock facilities, shipyard construction capability could be increased considerably by the proposed method. To show the structural safety of this method, a bulk carrier and an oil tanker were employed, and we investigated the structural behavior of those ships to which the new block assembly method was applied. The ship hull models attached with connective parts are analyzed in detail through finite element analyses, and the cargo capacity of the bulk carrier is briefly discussed as well. The results of these studies show the potential for applying this new block assembly method to practical shipbuilding.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.5
• /
• pp.825-830
• /
• 2001

Escherichia coli, which harbored the ars operon from a plasmid pMH12 of Klebsiella oxytoca D12, showed filamentation due to the expression of ars genes in the presence of arsenite. The continued DNA replication in the absence of cell division was revealed, since nucleoids abound with DAPI appeared to be arranged in chains. In contrast to overexpression of arsA, its frame-shift mutant and knock-out mutant lost filamentation in the presence of arsenite, which suggested that ars-induced division block was dependent on expression of arsA. ArsA-induced division inhibition was not a consequence of an inhibition of DNA replication, and the inability of arsenite to induce an SOS response indicated that arsA-mediated division inhibition was dependent on the expression of the gene product encoded by the minB operon. ArsA is a peripheral membrane protein with an ATP-binding domain, which is homologous to MinD that requires ATP-dependent efflux. These results suggested that ArsA could possibly recruit MinC to the membrane and modulate cytoplasmic FtsZ to block assembly at the middle of the cell.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.12
• /
• pp.1649-1655
• /
• 2009

The antioxidant activities of water extracts from wild vegetables such as Ligularia fischeri (GC), Capsicum annuum L. (GCY), Aster scaber (CNM), Petasites japonicus S. et Z. Max (MYD), Ipomoea batatas L. (Lam) (GGM) were evaluated and compared with water extracts from freeze dried block. The antioxidant properties of water extracts from wild vegetables and their freeze dried block were evaluated using different antioxidant tests; 2.2-diphenyl-1-picryl-hydrazyl (DPPH) radical scavenging, hydroxyl radical scavenging and nitrite scavenging activities. The water extracts from wild vegetables were found to have a higher total phenolic content than water extracts from freeze dried block. Total phenolic contents of water extracts from GC, GCY, CNM, MYD, and GGM were $471.66{\pm}3.52\;{\mu}g/mg,\;141.33{\pm}2.51\;{\mu}g/mg,\;177.33{\pm}2.88\;{\mu}g/mg,\;238.66{\pm}9.50\;{\mu}g/mg\;and\;122.67{\pm}3.51\;{\mu}g/mg$, respectively. At the concentrations of 1000 ppm, water extracts from GC, GCY, CNM, and GGM showed higher activities than water extracts from their freeze dried block on DPPH radical scavenger activity. The activity of water extracts from CNM, GC, GCY, MYD, and GGM were 90.9%, 89.9%, 76.6%, 71.1%, and 57.4%, respectively. When 10000 ppm of GC, GCY, CNM, MYD, and GGM water extracts tested for hydroxyl radical scavenging activity, activities were increased by 38.8%, 33.4%, 35.9%, 34.3%, and 33.8%, respectively and a similar effect was found with water extracts from GCY, CNM, and GGM freeze dried block at 10000 ppm concentration. However, the water extracts from GC and MYD was slightly more effective than freeze dried block extracts. The water extracts from wild vegetables and their freeze dried block had effective DPPH radical scavenger activity and hydroxyl radical scavenging activity at all tested concentrations. Nitrite scavenging activity of GC water extract significantly increased in a dose-dependent manner and the extract had higher nitrite scavenging activity than extracts freeze dried block extracts. We found that freeze dried block maintained antioxidant activities of the wild vegetables.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.27-32
• /
• 2014

Two-dimensional hybrid codewords are generated by using each row of identity matrix for spatial encoding and nonideal symmetric balance incomplete block design(BIBD) code for spectral encoding. This spatial/spectral optical code-division multiple-access (OCDMA) network uses single-balanced detectors to abstract the desired information bits and to eliminate the multiple-access interference(MAI). Analytical results show that the number of simultaneous users increases significantly by using the proposed hybrid codes.

• Computers and Concrete
• /
• v.3 no.1
• /
• pp.17-28
• /
• 2006

Replacement of actual stress distribution in a reinforced concrete (RC) flexural member with a simpler geometrical shape, which maintains magnitude and location of the resultant compressive force, is an acceptable conceptual trick. This concept was originally perfected for normal strength concrete. In recent years, high strength concrete (HSC) has been introduced and widely used in modern construction. The stress block parameters require updating to account for special features of HSC in the design of flexural members. In future, more varieties of concrete may be developed and a corresponding design procedure of RC flexural members will be required. The usual practice is to conduct large number of experiments on various sizes of specimen and then evolve an empirical relation. This paper presents a numerical procedure through which the stress block parameters can be numerically derived for a given strain ratio variation. The material model for concrete is presented and computational procedure is described. This procedure is illustrated with several variations of strain ratio. The advantages of numerical procedure are that it costs less and it can be used with new material models for any new variety of concrete.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1066-1069
• /
• 2002

Orthogonal frequency division multiplexing (OFDM) is a special technique for communication systems which can support the high data rate transmission with sufficient robustness to fading channels. Tansmitter diversity with space-time block coding (STBC) is an attractive transmission scheme to improve the performance of systems. In this paper, we compare the performance of space-time block coded OFDM systems with that of conventional OFDM systems over fast fading channels. The block-interleaved (BI) STBC and frequency hopping (FH) OFDM are proposed in the study to provide the maximum achievable diversity gains. As the simulation results, the STBC OFDM, Bl-STBC OFDM and Bl-STBC FH-OFDM provide the much improved performance over the conventional OFDM. And the Bl-STBC FH-OFDM also provide the better performance than the STBC OFDM and Bl-STBC OFDM, especially, in the case of the two transmit antennas are employed while BI-STBC FH-OFDM can maintain the same data rate of 12 Mbps.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1296-1299
• /
• 2002

We implemented a CD signal processor operated on a CAV 48-speed CD-ROM drive into a VLSI. The CD signal processor is a mixed mode monolithic IC including servo-processor, data recovery, data-processor, and I-bit DAC. For servo signal processing, we included a DSP core, while, for CAV mode playback, we adopted a PLL with a wide recovery range. Data processor (DP) was designed to meet the yellow book specification.［2］So, the DP block consists of EFM demodulator, C1/C2 ECC block, audio processor and a block transferring data to an ATAPI chip. A modified Euclid's algorithm was used as a key equation solver for the ECC block To achieve the high-speed decoding, the RS decoder is operated by a pipelined method. Audio playability is increased by playing a CD-DA disc at the speed of 12X or 16X. For this, subcode sync and data are processed in the same way as main data processing. The overall performance of IC is verified by measuring a transfer rate from the innermost area of disc to the outermost area. At 48-speed, the operating frequency is 210 ㎒, and this chip is fabricated by 0.35 um STD90 cell library of Samsung Electronics.

• Genomics & Informatics
• /
• v.2 no.2
• /
• pp.107-109
• /
• 2004

HapAnalyzer is an analysis system that provides minimum analysis methods for the SNP-based association studies. It consists of Hardy-Weinberg equilibrium (HWE) test, linkage disequilibrium (LD) computation, haplotype reconstruction, and SNP (or haplotype)-phenotype association assessment. It is well suited to a case-control association study for the unrelated population.