• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권9호
• /
• pp.3712-3729
• /
• 2020

Smoke detection is helpful for early fire detection. With its large coverage area and low cost, vision-based smoke detection technology is the main research direction of outdoor smoke detection. We propose a two-stage smoke detection method combined with block Deep Normalization and Convolutional Neural Network (DNCNN) and visual change image. In the first stage, each suspected smoke region is detected from each frame of the images by using block DNCNN. According to the physical characteristics of smoke diffusion, a concept of visual change image is put forward in this paper, which is constructed by the video motion change state of the suspected smoke regions, and can describe the physical diffusion characteristics of smoke in the time and space domains. In the second stage, the Support Vector Machine (SVM) classifier is used to classify the Histogram of Oriented Gradients (HOG) features of visual change images of the suspected smoke regions, in this way to reduce the false alarm caused by the smoke-like objects such as cloud and fog. Simulation experiments are carried out on two public datasets of smoke. Results show that the accuracy and recall rate of smoke detection are high, and the false alarm rate is much lower than that of other comparison methods.

• 한국산학기술학회논문지
• /
• 제15권9호
• /
• pp.5776-5782
• /
• 2014

음영 지역 해소 및 셀 커버리지 확대를 위하여 중계기를 활용하는 이동 통신 시스템이 널리 연구되고 있다. 본 논문에서는 중계기를 통해 다중 경로가 확보된 음영 지역에서 주파수 공간 블록 부호를 적용한 SC-FDMA(Single Carrier-Frequency Division Multiple Access) 전송 시스템을 제안하고, 중계기와 수신국 간의 신호 대 잡음 비를 기준으로 음영 지역을 위한 SC-FDMA 시스템의 성능을 비교한다. 중계기에서 복원된 전송 신호에 대하여 주파수 공간 블록 부호를 적용하여 재전송함으로서 중계기 기반 SC-FDMA 시스템의 수신 성능을 크게 향상시킬 수 있다. 본 논문에서 제안된 주파수 공간 블록 부호화 중계기 기반 SC-FDMA 시스템의 신호 대 잡음 비 성능이 단일 중계기 기반 SC-FDMA 시스템보다 $10^{-2}$ 심볼 오류율 수준에서 약 5 dB 개선됨을 실험을 통해 확인할 수 있다.

• 한국환경복원기술학회지
• /
• 제18권3호
• /
• pp.97-107
• /
• 2015

Research was initiated to investigate a vegetation characteristics of the species of ground cover plants mixed with herbeceous and woody plants on a cut slope. 4 different ground cover plants (Miscanthus sinensis var. purpurascens, Pennisetum alopecuroides, Festuca arundinacea and Zoysia japonica) were seeded at the same rate of $10.0g/m^2$ with herbaceous plants (Lotus corniculatus var. japonicus, Dianthus sinensis, Aster yomena, Chrysanthemum zawadskii and Coreopsis drummondii L) at the total seeding rate of $7.5g/m^2$ and native woody plants (Lespedeza bicolor Turcz, Indigofera pseudo-tinctoria and Albizzia julibrissin) at the total seeding rate of $7.5g/m^2$, respectively. This experiment was treated with 3 replications on a randomized block design. Data such as surface coverage rate(%), the germinating number, plant height and visual quality were analyzed. There were no statistic differences observed in the soil hardness and the soil moisture content while a significant difference was observed in the surface coverage rate and the germinating number. The surface coverage rate and the germinating number were significantly high in the Pennisetum alopecuroides plot when compared with the Miscanthus sinensis var. purpurascens plot, the Festuca arundinacea plot and the Zoysia japonica plot, respectively from the viewpoint of ground covers. Especially, the surface coverage rate was considerably low in the Festuca arundinacea plot. However, the surface coverage rate and the germinating number were no statistic differences observed in this treatment from the viewpoint of herbaceous and woody plants. Also, both of the plant height and visual quality were high in the Pennisetum alopecuroides plot when compared with the Miscanthus sinensis var. purpurascens plot, the Festuca arundinacea plot and the Zoysia japonica plot, respectively. We concluded that Pennisetum alopecuroides was the optimum plant from the treated ground covers mixed with native woody and herbaceous plants for the balanced emergence from the viewpoint of the ecological slope vegetation.

• 대한치과의사협회지
• /
• 제54권7호
• /
• pp.501-512
• /
• 2016

We evaluated a self-inflatable osmotic tissue expander for its utility in creating sufficient soft tissue elongation for primary closure after bone grafting. Six patients with alveolar defects who required vertical augmentation of >6 mm before implant placement were enrolled. All had more than three prior surgeries, and flap advancement for primary coverage was restricted by severely fibrosed scars. Expanders were inserted beneath the flap and fixed with a screw. After 4 weeks, expander removal and bone grafting were performed simultaneously. A vertical block autograft and guided bone regeneration and distraction osteogenesis were performed. Expansion was sufficient to cover the grafted area without additional periosteal incision. Complications included mucosal perforation and displacement of the expander. All augmentation procedures healed uneventfully and the osseous implants were successfully placed. The tissue expander may facilitate primary closure by increasing soft tissue volume. In our experience, this device is effective, rapid, and minimally invasive, especially in fibrous scar tissue.

• 한국통신학회논문지
• /
• 제36권3C호
• /
• pp.127-132
• /
• 2011

본 논문은 이동 네트워크의 다중 페이딩 환경에서 고속 전송 효율성과 범위 확장을 위한 협력 통신을 제안한다. 제안된 전략은 가상 MIMO 전송 다이버시티를 이용한 수신 성능 향상을 위해 STBC(Space-Time Block Code)를 이용한다. 또한 시뮬레이션 결과를 보면 제안된 전략이 가상 다중 안테나 시스템 (virtual MIMO)를 설정 해줌으로써 공간 다이버시티의 좋은 특성과 코팅 이득을 잘 활용하기 때문에, SNR을 향상시켜주고 기존 전략과 비교해보면 제안된 전략의 전송 시간이 훨씬 더 빠르다는 걸 보여준다. 본 논문에서는 연구의 타당성을 보이기 위해 MATLAB을 이용한 UWB 통신 시스템의 시뮬레이션을 제시한다.

• Journal of Communications and Networks
• /
• 제15권3호
• /
• pp.292-300
• /
• 2013

Nowadays, energy saving has become a hot topic and information and communication technology has become a major power consumer. In long term evolution advanced (LTE-A) networks, heterogeneous deployments of low-power nodes and conventional macrocells provide some new features, such as coverage extension, throughput enhancement, and load balancing. However, a large-scale deployment of low-power nodes brings substantial energy consumption and interference problems. In this paper, we propose a novel switching strategy (NS), which adaptively switches on or off some low-power nodes based on the instantaneous load of the system. It is compatible with the microcells' load balancing feature and can be easily implemented on the basis of existing LTE-A specifications. Moreover, we develop an analytical model for analyzing the performance of system energy consumption, block rate, throughput, and energy efficiency. The performance of NS is evaluated by comparison with existing strategies. Theoretical analysis and simulation results show that NS not only has a low block rate, but also achieves a high energy efficiency.

• 고신대학교 의과대학 학술지
• /
• 제33권3호
• /
• pp.468-476
• /
• 2018

Perioperative anaphylaxis, although rare, is a severe, life-threatening unexpected systemic hypersensitivity reaction. Simultaneous administration of various drugs during anesthesia, the difficulty of communicate with patients in sedation and anesthesia, and coverage of the patient with surgical drapes are considered to be factors that impede early recognition of anaphylactic reactions. It is very important to perform an intradermal skin test because antibiotics are the most common cause of perioperative anaphylaxis. We report a case of negative-intradermal skin test antibiotic anaphylaxis mistaken for local aesthetic systemic toxicity without increase of serum tryptase for confirmative diagnostic biomaker during surgery under brachial plexus block. It is not possible to exclude the danger of anaphylaxis completely, even if it is negative-intradermal skin test and normal tryptase level. Therefore, anesthesiologists should be closely monitored and treated early for antibiotics related hypersensitive reaction, like other medicines during anesthesia.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권5호
• /
• pp.1829-1846
• /
• 2021

Transient faults occur in computation units of a processor, which can cause control flow errors (CFEs) and compromise system reliability. The software-based methods perform illegal control flow detection by inserting redundant instructions and monitoring signature. However, the existing methods not only have drawbacks in terms of performance overhead, but also lack of configurability. We propose a configurable approach CCFCA for detecting CFEs. The configurability of CCFCA is implemented by analyzing the criticality of each region and tuning the detecting granularity. For critical regions, program blocks are divided according to space-time overhead and reliability constraints, so that protection intensity can be configured flexibly. For other regions, signature detection algorithms are only used in the first basic block and last basic block. This helps to improve the fault-tolerant efficiency of the CCFCA. At the same time, CCFCA also has the function of solving confusion and instruction self-detection. Our experimental results show that CCFCA incurs only 10.61% performance overhead on average for several C benchmark program and the average undetected error rate is only 9.29%. CCFCA has high error coverage and low overhead compared with similar algorithms. This helps to meet different cost requirements and reliability requirements.

• 한국환경복원기술학회지
• /
• 제5권4호
• /
• pp.1-9
• /
• 2002

This study is carried out to make the environmentally affinitive porous planting block for revegetation and to make a effective program for greening plans. The summary is shown below. 1. In order to get stronger intensity and distribute proper porosity in the block for planting, the cements mixed with fine soil were used and the finer in soil grains gives the stronger in intensity of the cements. Use of the furnace slag cements instead of the portland cements showed relatively stronger in intensity of the block. The intensity of the block became stronger when the mixed ratio of the cements to soil is 5 : 1, but the pore space ratio was lower. The percolate pH of the portland cements after one month of treatment was 13.1 but the percolate pH of the furnace slag cements was shown lower. To mold proper porous planting blocks, the proper combination of additives such as the dehydrating agent, elastic agent and adhesives into the mixture of cements and soil gives better effectives. 2. After molding the porous planting blocks, it gave a better result when the grains of the filler made of peat moss, upland soil and compound fertilizer were smaller than 2 mm in size. Shaking of the filling materials also gave the better result, but it took more time and cost much more. Therefore, it was better when the filling materials were mixed with water first then flew down for stuffing. 3. It was necessary to cover with soil after seeding or planting on the porous planting blocks. The proper thickness of the soil to help root development and keep moisture is about 3~5 cm. 4. The plants for planting on the porous planting block were required stronger in the growth condition of their roots and their environmental adaptability. The average germination percentage and rate of Platycodon grandiflorum on the porous planting block were 88.8% and 85% accordingly and their rate is very uniform. The germination rates of Dianthus superbus var. longicalycinus and Taraxacum officinale were more than 50%. These grass species, Chelidonium majus var. asiaticum, Lysimachia mauritiana and Scabiosa mansenensis were the suggested biennial grasses in the planting area where exchanging of the seedling or nursery plants was not necessary because their germination rates were 59.3, 45.6 and 40.3% accordingly. Viola kapsanensis, Chrysanthemum sp., Taraxacum sp. and Iris ensata var. spontanea are the grass species that could be used by seeding for greening. However, the germination rate of Solidago virga-aurea var. asiatica, Aster scaber and Lythrum anceps were lower than 10%. The coverage ratio of Ixeris stolonifera is more than 80% after 60 days seeding and the root length of most of species are more than 10 cm except Iris ensata var. spontanea and Platycodon grandiflorum because their root developed thicker than other species.

• 대한전자공학회논문지SD
• /
• 제41권1호
• /
• pp.81-90
• /
• 2004

유한상태기의 상태할당은 이로부터 구현되는 순차회로의 속도, 면적, 테스팅 및 소비전력에 큰 영향을 미친다. 본 논문에서는 상태변수 그룹들 사이에 상호 의존성(dependency)을 최소화하여 테스팅 및 전력소모를 개선하기 위한 m-블록 분할을 이용한 새로운 상태할당 기술을 소개한다. m-블록 분할 알고리즘에 의해 상태도로부터 상태들을 그룹으로 나누어 상태변수의 상호의존성을 줄이고, 상태천이 확률에 의해 결정된 무게인자에 따라 상태간 상태변수의 변화를 최소로하는 코드를 할당하여 상태천이시 스위칭 횟수를 줄인다. 상태변수 의존성을 줄임으로써 순차회로 사이클이 줄어들어서 부분스캔 및 테스트 생성이 용이하게 되고, 상태변수간의 스위칭 횟수를 줄임으로써 소비전력이 줄어들게 든다. 즉, 본 상태할당 기술은 서로 상반 관계에 있는 테스팅과 저전력 문제를 동시에 해결할 수 있는 새로운 기술이다. 벤치마크 회로에 대한 실험결과 기존의 방법보다 고장점검도 및 소비전력이 현저히 개선되었음을 확인하였다.