• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.6
• /
• pp.627-634
• /
• 2007

A bonded plate or a coated part can be debonded by external impact or thermal expansion. To analyse adhesive strength, the blister test is generally adopted. In this paper, a blister test is modelled theoretically and then the stability and bifurcation of the blister are studied under several different cases. The blister is simplified to consist of a pure bending plate attached elastically to the rigid substrate. Expression of the energy release rate is obtained as a form of an explicit function for a circular-type blister or tunnel-type blister grown by controlling the internal pressure or internal volume. Stability and bifurcation are also studied in the frame of the quasi-static evolution. The study shows that the circular- type blister propagates with the first mode of bifurcation and that the tunnel-type blister propagates with a regular wave. It is proved that the waves have the same form on two side lines of the tunnel and that the wave length can be obtained. When the internal pressure is controlled, the blister is unstable, but when the internal volume is controlled, it is stable.

• Journal of the Korean Vacuum Society
• /
• v.4 no.3
• /
• pp.287-292
• /
• 1995

단결정 실리콘에 P,B,As 등의 dopant를 이온주입시켰을 때 상부에 스퍼터된 Ti과 고상반응에 의해 형성된 Ti 실리사이드막에 발생되는 blister 현상에 대해 조사했다. Dopant에 관계없이 dose양이 많을수록 Ti 실리사이드막에서 blister의 크기와 밀도가 증가한다. 실리콘 표면에 dopant를 주입한 후 열처리를 하여 damage를 줄여줌으로써 blister의 양을 줄일수 있었다. 이 때 열처리온도가 높을수록 blister의 수가 감소한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.346.2-346.2
• /
• 2016

The rear side contact recombination in the crystalline silicon solar cell could be reduced by back surface field. We formed polycrystalline silicon as a back surface field through crystallization of amorphous silicon. A thin silicon oxide applied to the passivation layer. We used quasi-steady-state photoconductance measurement to analyze electrical properties with various annealing condition. And, blister formed on surface of wafer during the annealing process. We observed the blister after varied annealing process with wafer of various surface. Shape and density of blister is influenced by various annealing temperature and process time. As the annealing temperature became higher, the average diameter of blister is decreased and total number of blister is increased. The sample with the $600^{\circ}C$ annealing temperature and 1 min annealing time exhibited the highest implied open circuit voltage and lifetime. We predicted that the various shape and density of blister affects the lifetime and implied open circuit voltage.

• Korean Journal of Acupuncture
• /
• v.28 no.3
• /
• pp.141-150
• /
• 2011

Objectives : The aims of this study were to evaluate a blister caused by cupping. Methods : We searched relevant case reports, survey, and review articles using databases of online bibliography. Results : 1. The fluid in the blister caused by cupping therapy is normal substance by laboratory analysis. The fluid has no signs of infection in the culture, Gram stain, or tissue biopsy 2. In histological finding, the blister caused by cupping therapy is made by dermo-epidermal seperation at subcellular level. Suction blistering was neither inflammatory nor autolysis activation of lysosomal hydrolases. 3. Blistering times directly, related to suction pressure. Suction blister formation time is accelerated in older subjects compared with younger individuals and higher temperature was more susceptable to the blister compared with lower temperature. The flexor aspect of forearm is a easy site for suction blister formation compared with leg and abdominal site. 4. Blister caused by cupping therapy is treated by regular and judicious changes of sterile dressing over several weeks. The vesicles healed well and left no visible scar. Conclusions : Blister caused by cupping therapy is artificially controlled by doctor's therapeutic purpose. Blister is not histologically injurious to health and the blister is a natural concomitant after cupping therapy.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.2
• /
• pp.235-240
• /
• 2013

This paper presents a disposable microfluidic infusion pump using the restoring force of elastomeric membrane of Polydimethylsiloxane. Microfluidic infusion pump consists of hydraulic resistance control part, elastomeric blister actuator part, drug inlet and outlet. Expanded elastomeric blister actuator continuously pushes liquid in the chamber to outlet. At same time, microchannel diameter near the outlet was controlled by thin elastomeric membrane in hydraulic resistance control part. Eventually flow rate of infused liquid is controlled by air pressure. In experimental study, the amount of the filled liquid in the blister is precisely controlled by the height of the blister. Flow rate of infused liquid could be controlled, that is, controlled release of the drug over time was possible by adjusting hydraulic resistance and restoring pressure with the blister actuator.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.143-148
• /
• 2004

The blister packaging is applied to many fields in recent years for its merit that it enable consumer to see the products. The most of battery packaging are blister type. However, the lithium battery is dealt with very carefully in packaging because of its explosion. The existing packaging machines lot lithium battery are mostly adapted alkaline packaging machine and their capacity is very inferior to other process, either. In this paper, the virtual prototype of the automatic blister packaging system for lithium battery which has new mechanism is developed and its performance is evaluated.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.149-154
• /
• 2003

The blister packaging is applied to many fields in recent years for its merit that it enable consumer to see the products. The most of battery packaging are blister type. However, the lithium battery is dealt with very carefully in packaging because of its explosion. The existing packaging machines for lithium battery are mostly adapted alkaline packaging machine and their capacity is very inferior to other process, either. In this paper, the virtual prototype of the automatic blister packaging system for lithium battery which has new mechanism and 240A/min capacity is developed and its performance is evaluated.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.112.2-112
• /
• 2003

Levels of blister rust infection (from Cronartium ribicola) varied in western white pine(Pinus monticola Dougl.) seedlings grown in two nurseries in northern Idaho. This observation suggested the potential importance of environmental components operating on the blister rust pathosystem. In an experiment designed to test the influence of environmental conditions at two nurseries, seedlings of a single genetic source were unintentionally held in cold storage for 6 months longer at one nursery than at the other. Subsequently, these seedlings, which had been growing under nursery conditions for 7 months or 1 month, were inoculated with blister rust spores on September 9th, 1999. Infection efficiency measured on the seedlings with only 1 month of growth was 70X greater than on the seedlings that had 7 months for their new growth to mature. Results from this nursery test and infection levels of northern Idaho resistant selections in mild climates suggest that expression of genes related to rust resistance in western white pine can be manipulated by regulation of phonology. If so, several new molecular tools may be employed to enhance our understanding of environmental regulation of genes for blister rust resistance.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1133-1138
• /
• 2003

The pressure tubes, which contain high temperature heavy water and fuel, are within the core of a CANDU nuclear reactor, and are thus subjected to high stresses, temperature gradient, and neutron flux. Further, it is well known that pressure tubes of cold-worked Zr-2.5Nb materials result in hydrogen diffusion, which create fully-hydrided regions (frequently called Blister). Thus a proper investigation of hydrogen diffusion within zirconium-alloy nuclear components, such as CANDU pressure tube and fuel channels is essential to predict the structural integrity of these components. In this respect, this paper presents numerical investigation of hydrogen diffusion to quantify the hydrogen concentration for blister growth of CANDU pressure tube. For this purpose, coupled temperature-hydrogen diffusion analyses are performed by means of two-dimensional finite element analysis. Comparison of predicted temperature field and blister with published test data shows good agreement.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.2
• /
• pp.189-195
• /
• 2004

The pressure tubes, which contain high temperature heavy water and fuel, are within the core of a CANDU nuclear reactor, and are thus subjected to high stresses, temperature gradient, and neutron flux. Further, it is well known that pressure tubes of cold-worked Zr-2.5Nb materials result in hydrogen diffusion, which create fully-hydrided regions (frequently called Blister). Thus a proper investigation of hydrogen diffusion within zirconium-alloy nuclear components, such as CANDU pressure tube and fuel channels is essential to predict the structural integrity of these components. In this respect, this paper presents numerical investigation of hydrogen diffusion to quantify the hydrogen concentration fur blister growth of CANDU pressure tube. For this purpose, coupled temperature-hydrogen diffusion analyses are performed by means of two-dimensional finite element analysis. Comparison of predicted temperature field and blister with published test data shows good agreement.