• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.10
• /
• pp.1859-1864
• /
• 2007

Existing barcode signal restoration algorithms are not robust to unmodeled outliers that may exist in scanned barcode images due to scratches, dirts, etc. In this paper, we describe a robust barcode signal restoration algorithm that uses the hybrid $L_1-L_2$ norm as a similarity measure. To optimze the similarity measure, we propose a modified iterative reweighted least squares algorithm based on the one step minimization of a quadratic surrogate function. In the simulations and experiments with barcode images, the proposed method showed better robustness than the conventional MSE based method. In addition, the proposed method converged quickly during optimization process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.6B
• /
• pp.776-783
• /
• 2001

통신 채널에서 블라인드 채널 등화는 훈련신호나 채널의 사전 정보가 필요하지 않기 때문에 전송 효율을 높일 수 있는 매우 중요한 문제이다. 선형 예측 오차 방법은 블라인드 등화기의 차수 추정 오차에 대하여 강인하며 적응 알고리듬을 이용하여 효율적으로 구현할 수 있는 장점이 있다. 시스템 지연은 등화기의 성능에 많은 영향을 끼치지만 기존의 one-step 선형 예측은 등화기의 임의의 시스템 지연에 대해서는 구현할 수 없는 단점이 있다. 순방향 선형 예측과 역방향 선형 예측은 각각 시스템 지연이 0과 최대인 블라인드 등화와 관련이 있다. 그러나 Multistep 예측은 임의의 시스템 지연을 갖는 블라인드 등화기를 구현할 수 있는 장점이 있다. 본 논문에서는 최적의 시스템 지연을 구한 후 RLS 알고리듬과 LMS 알고리듬을 이용한 multistep 선형 예측을 이용한 블라인드 채널 등화기를 제안하였다. 그리고 기존의 알고리듬들과 본 논문에서 제안한 알고리듬의 성능을 모의실험을 통하여 기존의 알고리듬들과 비교·평가하였다.

• The Journal of the Korea Contents Association
• /
• v.6 no.12
• /
• pp.89-95
• /
• 2006

The performance of blind source separation(BSS) using independent component analysis (ICA) declines significantly in a reverberant environment. A post-processing method proposed in this paper was designed to remove the residual component precisely. The proposed method used modified NLMS(normalized least mean square) filter in frequency domain, to estimate cross-talk path that causes residual cross-talk components. Residual cross-talk components in one channel is correspond to direct components in another channel. Therefore, we can estimate cross-talk path using another channel input signals from adaptive filter. Step size is normalized by input signal power in conventional NLMS filter, but it is normalized by sum of input signal power and error signal power in modified NLMS filter. By using this method, we can prevent misadjustment of filter weights. The estimated residual cross-talk components are subtracted by non-stationary spectral subtraction. The computer simulation results using speech signals show that the proposed method improves the noise reduction ratio(NRR) by approximately 3dB on conventional FDICA.

• Nuclear Engineering and Technology
• /
• v.46 no.6
• /
• pp.803-816
• /
• 2014

Defense-in-depth is a fundamental safety principle for the design and operation of nuclear power plants. Despite its general appeal, defense-in-depth is not without its drawbacks, which include its potential for concealing the occurrence of hazardous states in a system, and more generally rendering the latter more opaque for its operators and managers, thus resulting in safety blind spots. This in turn translates into a shrinking of the time window available for operators to identify an unfolding hazardous condition or situation and intervene to abate it. To prevent this drawback from materializing, we propose in this work a novel safety principle termed "observability-in-depth". We characterize it as the set of provisions technical, operational, and organizational designed to enable the monitoring and identification of emerging hazardous conditions and accident pathogens in real-time and over different time-scales. Observability-in-depth also requires the monitoring of conditions of all safety barriers that implement defense-in-depth; and in so doing it supports sensemaking of identified hazardous conditions, and the understanding of potential accident sequences that might follow (how they can propagate). Observability-in-depth is thus an information-centric principle, and its importance in accident prevention is in the value of the information it provides and actions or safety interventions it spurs. We examine several "event reports" from the U.S. Nuclear Regulatory Commission database, which illustrate specific instances of violation of the observability-in-depth safety principle and the consequences that followed (e.g., unmonitored releases and loss of containments). We also revisit the Three Mile Island accident in light of the proposed principle, and identify causes and consequences of the lack of observability-in-depth related to this accident sequence. We illustrate both the benefits of adopting the observability-in-depth safety principle and the adverse consequences when this principle is violated or not implemented. This work constitutes a first step in the development of the observability-in-depth safety principle, and we hope this effort invites other researchers and safety professionals to further explore and develop this principle and its implementation.

• Journal of Korea Multimedia Society
• /
• v.18 no.12
• /
• pp.1578-1585
• /
• 2015

This study aimed to develop and propose a Korean character group with the story of Shim Cheong applied as a motif. By borrowing the four stories (a dream of the birth of a child, filial behavior, regeneration and eyesight-gaining) presented in the story of Shim Cheong which has been passed on orally, the study designed the Korean character group and set up types of characters' roles to visualize these other characters seen in the content such as Shim Cheong the heroine, goblins, a baby dragon, Mr. Shim the blind and others. As a next step, the study applied the types to the seven essential types of Vogler's original characters. A process of how to visualize the group of those characters appearing in the story including Shim Cheong the heroine was offered. In particular, the study concentrates on figuring out how to expand and develop the Shim Cheong character to be this image of one of the most popular Korean princess characters. What this study had discussed will contribute to the field of character production when they try to commercialize characters and develop Korean characters with unique Korean features included.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.10
• /
• pp.14-22
• /
• 2010

The most costly and time-consuming process in the fabrication of today's multi-layer circuit board is drilling interconnection holes between adjacent layers and via holes within a layer. Decreasing size of via holes being demanded and growing number of via holes per panel increase drilling costs. Component density and electronic functionality of today's multi-layer circuit boards can be improved with the introduction of cost-effective, variable depth laser drilled blind micro via holes, and interconnection holes. Laser technology is being quickly adopted into the circuit board industry but can be accelerated with the introduction of a true production laser drilling system. In order to get optimized condition for drilling to FPCB (Flexible Printed Circuit Board), we use various drill pattern as drill step. For productivity, we investigate drill path optimization method. And for the precise drilling the thermal drift of scanner and temperature change of scan system are tested.

• Physical Therapy Rehabilitation Science
• /
• v.2 no.1
• /
• pp.39-43
• /
• 2013

Objective: The objective of this study is to investigate the effect of treadmill gait trainig on dynamic balance and gait functions in stroke patients. Design: Randomized, double-blind, controlled pilot study. Methods: Four subjects following first stroke participated in this study. They were divided randomly into the treadmill gait trainig group (TM group) (n=2) and the control group (n=2). Subjects in both groups received general training five times per week. Subjects in the TM group practiced an additional treadmill gait trainig program that consisted of 60 minutes, three times per week, during a period of four weeks. Timed up and go test (dynamic balance) and the GAITRite test (gait function) were evaluated before and after the intervention. Results: In dynamic balance (timed up and go test), the TM group (-14.235 sec) showed a greater decrease than the control group (-13.585 sec). In gait functions, the TM group showed a greater increase in gait speed (12.8 cm/s vs. 10.15 cm/s), step-length (5.825 cm vs. 3.735 cm), and stride-length (5.005 cm vs. 1.55 cm) than the control group. Conclusions: The treadmill gait trainig improved dynamic balance and gait functions. Further research is needed in order to confirm the generalization of these findings and to identify which stroke patients might benefit from treadmill gait trainig.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.499-530
• /
• 2010

Purpose: Lateral osteotomy is an essential step in the correction of nasal bony asymmetry. Direct visualization allows accurate repositioning of the nasal bones compared to blind techniques, which require precision and manual dexterity. We propose direct visualization procedures in open corrective rhinoplasty. Methods: The technique was used on 16 patients. All patients underwent open rhinoplasty with a columellar incision. The marginal incisions were extended on either side to allow access to the piriform aperture. A double hook was used to caudally retract the lower lateral cartilages and the fibrous connections between the upper and lower lateral cartilages were released until the piriform aperture was visualized. Through the incision, lateral osteotomy was performed using a reciprocating saw at that time with direct visualization. Additional procedures including augmentation rhinoplasty, hump resection, septoplasty and tip plasty were performed simultaneously. Results: This method provided excellent exposure to the lateral nasal bones and allowed the lateral osteotomy to be carried out precisely using the reciprocating saw. Conclusion: This extended open rhinoplasty method is suitable for most individuals, allowing a wide surgical field.

• The Journal of the Korean dental association
• /
• v.48 no.6
• /
• pp.469-477
• /
• 2010

The purpose of this study was to evaluate the effect of two dentin desensitizers and Er,Cr:YSGG laser for dentinal tubule occlusion. Twenty recently extracted single-rooted human teeth were used to obtain root dentinal fragments. The crowns were cut approximately 1mm below the cementum enamel junction(CEJ). A second cut was used to remove the apex of the root. Subsequently, a longitudinal cut was made in order to obtain 2 fragments from each root sample. The cementum from the cervical portion was removed using a high-speed diamond-coated bur in order to expose the dentin. To open dentinal tubules, forty samples were treated with 50% citric acid for 2 min and then rinsed under distilled water for 1 min. These were divided into four groups of ten samples each. The first group served as a control group. In group 2, the samples were irradiated with the Er,Cr:YSGG laser(Waterlase MD, Biolase, USA). In group 3, the samples were treated with Bisblock and ONE-STEP PLUS(Bisco, USA). In group 4, the samples were treated with Gluma comfort bond & Desensitizer(Heraeus Kulzer, Germany). All the samples were examined using Scanning electron microscopy(Hitachi, S-4700, Japan) with two different magnifications(X2000, X5000). These images were assessed by one examiner who was blind to the experimental procedure, using the index of smear layer removal. The distribution of smear layer removal grades was tested using Fisher's exact test. On the order hand, in order to evaluate the occluding effect of two dentin desensitizers and Er,Cr:YSGG laser, the number of exposed dentinal tubules was counted in each group. These were evaluated using the Kruskal-Wallis test with significance predetermined $\alpha$=0.05. There were statistically significant differences between the three groups(Er,Cr:YSGG laser, Bisblock+ONE-STEP PLUS, Gluma comfort bond & Desensitizer) and control group.

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.509-516
• /
• 1998

Thermoluminescence measurements were applied to the detection of seasoned-powered foods such as shellfish extract powder, seasoned marine products, Ramen soup powder and sardine extract powder whether they are irradiated or not. Correlation coefficients $(R^2)$ between irradiation doses and corresponding TL responses were more than 0.5966 in all samples and 0.9500 in Ramen soup powder. TL threshold value was pre-established for the detection of unknown Ramen soup powders by verifying TL responses with a re-irradiation step. Threshold values were maximum 1.37 for the nonirradiated samples and minimum 6.06 for the 2.5 kGy-irradiated samples. The samples showing values between 1.37 and 6.06 were subjected to a re-irradiation step for their detection, which results were reconfirmed by enumerating the total bacterial load of the detected samples. Pre-established threshold values were successfully applicable to the detection of 167 coded unknown samples, both nonirradiated and irradiated with gamma or electron-beam energy. In the assessment of irradiated doses, three calibration curves were pre-established by plotting TL intensity versus applied doses, of which a quadratic equation was obtained for the potential estimation of irradiated doses with some variations from the real doses.