• 폴리머
• /
• 제26권1호
• /
• pp.145-151
• /
• 2002

전분과 글리세롤을 이축 압출기를 사용하여 열간소성 전분(TPS)으로 제조한 후, TPS와 고밀도 폴리에틸렌(HDPE)을 조성을 달리하여 블렌딩하였다. 열적 특성, 형태학, 기계적 물성을 측정하였고, 조절된 호기성 퇴비화 방법(ISO14855)에 의하여 생분해도를 측정하였다. TPS 함량이 증가할수록 인장 강도, 신장율, 그리고 탄성율이 감소하였다. 특히 신장율은 TPS를 소량 첨가하여도 급격히 감소하였다. HDPE/TPS 블렌드의 $T_m$은 변화가 없었고, 이로써 두 고분자간 상용성이 없음을 확인하였다. 블렌드의 파단면 확인은 전자 주사 현미경으로 하였고, 두 물질의 계면에서 상분리가 일어남을 확인하였다. 45일간의 생분해 실험에서 TPS의 함량이 증가할수록 생분해도가 증가하였다.

• 한국식품영양과학회지
• /
• 제23권1호
• /
• pp.110-115
• /
• 1994

To investigate the effect of potato lipoxygenase on the farinograph characteristics of wheat flour dough, composite flours containing enzyme-active potato flor (EPF) and hot-ar dried potato flour(HPF) were used. EPF was made by freeze-drying potato tuber. DPF (denaturated potato flour) was prepared by holding EPF at 8$0^{\circ}C$ for 18 hr in a dry oven. The potato flours were added to wheat flour at a level of 10% , respectivley. EPFB (enzyme-active potato flour blends, 90% wheat flour +105 enzyme -active potato flour) containing lipoxygenase activity gave higher farinogram peak time and higher stability values, lower MTI (mixing tolerance index ) and lower weakness values than those of HPFB(hot-air potato flour blends, 90% wheat flour + 10 % hot-air potato flour). Moreover, then lipoxygenase was added to DPFB(denatured potato flour blends , 90% wheat flour + 10% denatured potato flour) at a level of EPFB, it resulted in increasing stability, peak time and decreasing MTI , weakness at a level of EPFB. When the lipoxugenase was added to wheat flour with fumaric acid at alevel of 6.5 $\times$ 10units/g flour, lipoxygenase overcame the deleterious effects that fumaric acid including activated double-bond compounds have at mixing stability. Also the addition of liposxygenase with linoleic acid to defatted wheat flour resulted in the increase in stability and decrease in MTI value compared with those of linoleic acid and defatted wheat flour.

• 한국분무공학회지
• /
• 제21권3호
• /
• pp.144-154
• /
• 2016

This review will be concentrated on the spray characteristics of biobutanol and its blends fuels in internal combustion engines including compression ignition, spark ignition and gas turbine engines. Butanol can be produced by fermentation from sucrose-containing feedstocks, starchy materials and lignocellulosic biomass. Among four isomers of butanol, n-butanol and iso-butanol has been used in CI and SI engines. This is due to higher octane rating and lower water solubility of both butanol compared with other isomers. The researches on the spray characteristics of neat butanol can be classified into the application to CI and SI engines, particularly GDI engine. Two empirical correlations for the prediction of spray angle for butanol as a function of Reynolds number was newly suggested. However, the applicability for the suggested empirical correlation is not yet proved. The butanol blended fuels used for the investigation of spray characteristics includes butanol-biodiesel blend, butanol-gasoline blend, butano-jet A blend and butanol-other fuel blends. Three blends such as butanol/ethanol, butanol/heptane and butanol/heavy fuel oil blends are included in butanol-other fuel blends. Even though combustion and emission characteristics of butanol/diesel fuel blend in CI engines were broadly investigated, study on spray characteristics of butanol/diesel fuel blend could not be found in the literature. In addition, the more study on the spray characteristics of butanol /gasoline blend is required.

• 한국염색가공학회지
• /
• 제16권5호
• /
• pp.1-7
• /
• 2004

Because acid dyes and reactive dyes require acidic condition for adsorption and alkaline condition for fixation respectively, it is difficult to dye nylon/cotton blends in one-bath one-step dyeing method. In this paper we tried to find out the suitable dye and dyeing condition for one-bath one-step dyeing of nylon/cotton blends. MNT type reactive dyes showed higher exhaustion on cotton as compared with MCT type dyes at neutral pH, which means that the MNT type reactive dyes are preferable for one-bath one-step dyeing method. The optimum condition for one-bath one-step dyeing of nylon/cotton blends was found to be pH 7. Wash fastness of fabrics dyed with half-milling type acid dyes was superior to that of fabrics dyed with levelling type acid dyes, when MNT type reactive dyes were used together.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1215-1219
• /
• 2007

이 논문에서는 폴리프로필렌/열방성 액정고분자 블렌드에 관한 연구 결과를 나타냈다. 기존의 연구에서 주로 쓰인 액정고분자 (Thermotropic Liquid Crystalline Polymer, TLCP)는 용융점이 대부분 270o0 이상으로 가공은 적어도 300oC 이상에서 가능하기 때문에, PP와의 블렌드 시 PP의 열분해를 피할 수 없다. 이 때문에 원하는 정도의 물성을 얻기 위해서는 과량의 TLCP를 첨가하여야 한다. 이 연구에서 고온용 TLCP 대신 융점이 220oC 정도 되는 새로운 TLCP를 사용하여 블렌드를 제조하였고, 그 특성을 관찰하였다. 연구 결과 기존 PP/TLCP 블렌드와 비교해 동등 이상의 물성을 보임을 관찰할 수 있었고, 이로서 새로운 저온용 TLCP가 PP의 강화제로 사용될 수 있음을 알 수 있었다.

• 폴리머
• /
• 제35권6호
• /
• pp.580-585
• /
• 2011

본 연구는 석유유래 생분해성 고분자인 poly(butylene adipate-co-succinate-co-terephthalate)(PBAST)의 생분해도와 친환경성을 높이기 위하여 변형 열가소성 전분(CMPS, chemically modified thermoplastic starch)을 첨가하였다. CMPS는 천연고분자인 전분을 가소제, maleic anhydride(MA) 및 반응개시제로 반응시켜 제조한 일종의 식물유래 생분해성 수지이다. PBAST/CMPS 블렌드의 파단면 사진으로부터 PBAST와 CMPS 상이 분리된 비혼화성 (immiscible blend) 블렌드이지만 상 사이의 계면 형상이 좋은 상용성 블렌드임을 알 수 있었다. 인장강도와 연신율은 CMPS 함량이 증가함에 따라 감소하였지만 탄성률은 증가하였다. 블렌드의 생분해도는 순수 PBAST에 비해 매우 높았고 CMPS의 함량이 증가함에 따라 증가하였다.

• Bulletin of the Korean Chemical Society
• /
• 제16권9호
• /
• pp.873-885
• /
• 1995

The local structural and thermodynamical properties of blends A-B/H of a diblock copolymer A-B and a homopolymer H are studied using the polymer reference interaction site model (RISM) integral equation theory with the mean-spherical approximation closure. The random phase approximation (RPA)-like static scattering function is derived and the interaction parameter is obtained to investigate the phase transition behaviors in A-B/H blends effectively. The dependences of the microscopic interaction parameter and the macrophase-microphase separation on temperature, molecular weight, block composition and segment size ratio of the diblock copolymer, density, and concentration of the added homopolymer, are investigated numerically within the framework of Gaussian chain statistics. The numerical calculations of site-site interchain pair correlation functions are performed to see the local structures for the model blends. The calculated phase diagrams for A-B/H blends from the polymer RISM theory are compared with results by the RPA model and transmission electron microscopy (TEM). Our extended formal version shows the different feature from RPA in the microscopic phase separation behavior, but shows the consistency with TEM qualitatively. Scaling relationships of scattering peak, interaction parameter, and temperature at the microphase separation are obtained for the molecular weight of diblock copolymer. They are compared with the recent data by small-angle neutron scattering measurements.

• Elastomers and Composites
• /
• 제40권2호
• /
• pp.128-135
• /
• 2005

전분/PVA 블렌드의 기계적 물성에 영향을 미칠 수 있는 인자들을 고려하여 최적화 조건을 조사하였다. 실험은 다구찌 방법에 기반을 둔 실험크기 27, 3수준, 13열의 $L_{27}(3^{13})$ 직교배 열표가 사용되었다. UTM과 인열 강도계를 통하여 인장강도, 파단신율, 초기탄성률, 인열강도를 측정하여 전분/PVA 블렌드의 제조 최적 조건을 결정하였다. 각 변수들의 분석을 바탕으로 각인자의 상호작용 효과가 결정되었다. $L_{27}(3^{13})$의 분석결과, 글리세롤과 요소가 4가지 기계적 물성의 증진에 가장 중요한 인자로 파악되었다.

• Elastomers and Composites
• /
• 제30권3호
• /
• pp.195-206
• /
• 1995

To modify the NBR rubber roll which has poor abrasion and chemical resistance, NBR/PVC blends were prepared in various composition ratios. First of all, their miscibility and vulcanization characteristics were investigated. Their abrasion and chemical resistant properties and physical properties were also studied. DSC thermograms for NBR/PVC blends show only one Tg in the entire composition range, demonstrating a perfect miscibility. In the vulcanization characteristics tested by rheometer, maximum torque decreases as PVC contents increased. In the investigation of physical properties of NBR/PVC blends, hardness increases and elongation decreases along with the increasing contents of PVC. On the other hands, tensile strength increases with the increasing contents of PVC up to 11.1 wt. %, and then decreases with higher contents of PVC. While the abrasion resistance of NBR/PVC blends was similar to that of NBR itself, the chemical resistance of NBR/PVC blends was superior to that of NBR.

• Elastomers and Composites
• /
• 제45권4호
• /
• pp.280-285
• /
• 2010

CIIR에 BR, SBR 및 NBR을 다양한 조성으로 혼합하여 블렌드물의 마찰계수와 내마모특성 및 물리적 특성 변화 등을 검토하였다. 영구압축줄음율 측정에서 블렌드비율 25%에서 가장 높은 값을 나타내어 변형에 대한 저항 특성이 가장 낮은 것으로 나타났다. SBR, NBR, BR이 CIIR에 블렌딩됨에 따라 블렌드물의 마찰계수는 산술평균적으로 저하하는 경향을 나타내었다. 마찰력 향상을 위하여 BR에 CIIR을 블렌딩하는 경우 마찰계수 증가에 의한 접지력 향상보다는 내마모 성능 저하에 의한 마이너스효과가 더욱 큰 것으로 나타났다.