• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.148-155
• /
• 1998

For products of various shapes, compound surfaces are used. Blending surfaces are essential to the products of the compound surfaces. In this paper a method of making shape of blending surface flexible with parameter control is discussed. The parameter has quantitative control of shape of the blend. The blending surface is applied to NURBS and simple primitives in solid model. Intersection curves of surfaces is used to provide the blend with generality. Rail curve are found with the intersection curves. The blend is generated by rail curves and parameter control. Also, In strict constraint condition, blending surface with flexible shapes is discussed, keeping ;${GC}^1$ and ;${GC}^2$ continuity between free-formed surfaces and solids. Joining blending ,bridge blending and blending surface at corner are generated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1244-1247
• /
• 2002

The blending brake is mixed brake system which is operated by electrical and mechanical brake simultaneously. Most of urban transit system is used with blending brake unit. In order to train is align at the stopping position. The blending brake shall be presicely operated to the train. Many parameters are influence on the train when train is stopped on presicion position by blending brake. It is considered such parameters as decceleration, variable load, jerk, friction cofficient, etc. Therefore, This paper consider the parameter and describes the blending control for standard EMU. The control algorithm of it is proposed and simulation of it carried out by using MATLAB. Also Electronic control unit is manufactured with micro procesor which is configured fot blending control and is verified by performance test.

• 한국전기전자재료학회논문지
• /
• 제14권12호
• /
• pp.1023-1026
• /
• 2001

The control of high pretilt angle for nematic liquid crystal (NLC) with negative dielectric anisotropy on the rubbed blending polyimide (PI) of homeotropic and homogeneous alignment surface was studied. High LC pretilt angle on the rubbing blending polyimide of homeotropic PI and SE-7492 surface was measured and the LC pretilt angle increased wish blending ratio and rubbing strength. However, the low LC pretilt angle on the rubbed blending polyimide of homeotropic PI and SE-150 surface was measured. The high pretilt angle of NLC can be achieved by using the blending PI surface.

• 한국항공우주학회지
• /
• 제35권7호
• /
• pp.565-574
• /
• 2007

본 연구에서는 NACA 0012 익형 주위의 비교적 높은 레이놀즈수 유동장에 대한 Gurney 플랩과 제트 플랩을 혼용한 유동제어 기법의 유동제어 특성에 대하여 비정렬 격자계를 사용하는 수치적 기법을 이용하여 살펴보았다. 혼합제어 기법의 유동제어 특성을 파악하기 위하여 유동제어에 따른 공력계수 및 모멘트 계수의 변화를 혼합제어 기법을 구성하는 각각의 유동제어 기법들의 결과들과 비교하여 살펴보았다. 혼합제어 기법의 경우 제트 플랩만을 고려한 경우에 비하여 상당히 낮은 무차원 세기의 제트를 이용하여도 유사한 양력 향상 특성을 획득할 수 있었으며, Gurney 플랩만을 이용한 경우에 나타나는 항력의 증가를 완화시켜 주었다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.163-167
• /
• 2001

The paper introduce the basic concept for the variable graph description of blending functions in NURBS using some control method; the control points, knot vectors and weight points in 3D space.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.616-620
• /
• 2003

Brake action is important in train operation. In case of diesel motor cas, coachs and wagon, the brake system is only act on the stop of train, but it is emphasis on safety and convenience in urban transit system such as EMU, subwar, AGT, etc. Brake of EMU has two types. one is called service brake that is used at normal operation. The other is called emergency brake. it is used at emergency operation. Service brake bring a EMU to a halt through a blending brake that form electronic brake and frictional brake. Generally EMU compose motor car and trailer car. Blending brake bring a EMU to a halt through a blending brake that form electronic brake of motor car and frictional brake of trailer car. Blending braking technology have different characteristics each nations or manufacturing companies. but deceleration command that is parameter decide blending brake. According to deceleration command, electronic brake and frictional brake are applied differently So braking power is different. electronic brake and frictional brake must be used appropriately as deceleration command. Also braking facilities must be stopped EMU more economically and safely through revision of algorism about blending brake according to output diagram. Thus The purpose of paper is to propose blending braking control way as consideration of braking output diagram used deceleration command that influence blending brake of EMU.

• 한국의류산업학회지
• /
• 제9권5호
• /
• pp.569-572
• /
• 2007

The effectiveness of Palmarosa, Neroli and Jasmin blending oil on dry skin of rat induced by kitchen detergent are investigated. The experimental groups were divided the control group, group treated with surfactant, group treated with Palmarosa and Neroli, and group with Palmarosa, Neroli and Jasmin. Observation of epidermis and the alteration of mast cell were performed with photomicroscope. According to the epidermis morphological changes analysis, the A3 group treated with Palmarosa, Neroli and Jasmin blending oil was appeared the most similar with the control group, and the A2 group applied with Palmarosa and Neroli blending oil was sequently displayed similar characteristics. The collagen layer's breakaway resulting from Palmarosa essential oil, the collagen layer's restoration resulting from Neroli essential oil, the collagen layer's retention hyperkeratosis resulting from Jasmin essential oil were observed in the structure of the epidermal layer. In photomicrosope observation of mast cell to examine the inflammatory reactions, the increase in size and number of mast cell were showed in A1 group treated with surfactant compared to the control group. The number of mast cells definitely decreased in groups which were treated with Palmarosa, Neroli and Jasmin blending oil.

• 한국멀티미디어학회논문지
• /
• 제12권6호
• /
• pp.842-855
• /
• 2009

We present a physics-based blending method for the second order algebraic implicit surface. Unlike other traditional blending techniques, the proposed method avoids complex mathematical operations and unwanted artifacts like bulge, which have highly limited the application of the second order algebraic implicit surface as a modeling primitive in spite of lots of its excellent properties. Instead, the proposed method provides the designer with flexibility to control the shapes of the blending surface on interactive basis; the designer can check and design the shape of blending surfaces accurately by simply adjusting several physics parameter in real time, which was impossible in the traditional blending methods. In the later parts of this paper, several results are also presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.337-340
• /
• 2001

The control of high pretilt angle far nematic liquid crystal (NLC) with negative dielectric anisotropy on the rubbed blending polyimide (homeotropic and homogeneous alignment) surface were studied. High NLC pretilt angle generated on the blending polyimide (homeotropic polyimide and SE-7492 surface was measured and the NLC pretilt angle increases with blending ratio and rubbing strength. However, the NLC pretilt angle generated on the blending polyimide (homeotropic polyimide and SE-150 surface was not varied. The high pretilt angle the NLC using blending polyimide surface can be acheived.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.337-340
• /
• 2001

The control of high pretilt angle for nematic liquid crystal (NLC) with negative dielectric anisotropy on the rubbed blending polyimide (homeotropic and homogeneous alignment) surface were studied. High NLC pretilt angle generated on the blending polyimide (homeotropic polyimide and SE-7492 surface was measured and the NLC pretilt angle increases with blending ratio and rubbing strength. However, the NLC pretilt angle generated on the blending polyimide (homeotropic polyimide and SE-150 surface was not varied. The high pretilt angle the NLC using blending polyimide surface can be achieved.