• Elastomers and Composites
• /
• 제49권4호
• /
• pp.267-274
• /
• 2014

가교제 사용 없이 가교반응을 진행할 수 있는 경화시스템에 자기응답 입자를 분산시켜 자기유변 탄성체를 제작하였다. 클로로프렌 고무(CR)와 Maleic Anhydride(MAH)의 열과 압력을 이용한 개질법인 dynamic maleation의 공정을 이용하여 10 phr, $100^{\circ}C$에서 최적의 grafting ratio를 가짐을 FT-IR를 이용하여 확인하였다. 개질된 CR-g-MAH와 에폭시화 천연고무(ENR)를 반응 블렌드시켜 가교시켰으며 가교특성은 고무레오미터를 이용하여 측정하였으며, 30 wt%의 ENR를 첨가하였을 때 성형하기 적합한 스코치 시간과 가교속도를 가지는 것을 확인하였다. 자기응답성 입자(MRP)를 배향시키기 위해 설계 제작한 자기장부여장치를 이용하여 효율적으로 입자가 배향된 자기 유변 탄성체를 제조하였다. SEM을 통해 MRP의 분산 및 배향을 확인하였으며, 이방성 자기유변 탄성체의 인장강도는 등방성 자기유변 탄성체보다 낮고, 경도는 높음을 확인하였다.

• 한국식품영양과학회지
• /
• 제31권3호
• /
• pp.475-481
• /
• 2002

분해성 천연 고분자인 PHB와 chitosan을 블렌드하여 필름을 제조한뒤 필름의 결정특성 및 물리적 성질을 측정한 결과 PHB/chitosan 필름의 X선 회절도 측정에서 상대 결정화도는 chitosan의 함량이 증가할수록 낮아졌으며 FT-lR 측정에서는 chitosan 비율이 증가할수록 PHB의 carbonyl기 의 피크가 작아졌다. DSC측정에 의한 필름의 열적 특성에서는chitosan의 첨가로 인해 열안정성과 결정성이 낮아지는 경향을 보였다. 시차주사현미경을 이용하여 관찰한 필름의 표면상태에서는 chitosan의 비율이 증가할수록 입자크기가 감소하는 것으로 나타났다. 필름의 물성은 PHB에 대한 chitosan의 함량이 증가할수록 인장강도와 신장률이 증가하여 chitosan 첨가로 인해 필름의 물성이 향상된 것을 알 수 있었다. PHB/chitosan필름의 색도 측정 결과 PHB에 chitosan의 함량이 증가할수록 L값과 b값은 낮아지고 필름의 투명도는 높아졌다.

• 분석과학
• /
• 제27권5호
• /
• pp.228-233
• /
• 2014

전기방사된 나노섬유는 구조 및 비교적 손쉬운 제조공정으로 의료용 재료분야의 활용이 늘어나고 있다. 제조된 나노섬유는 블럭공중합체의 PCL-PEG diamin block copolymer의 혼합 비가 높을수록 말단에 결합된 아민기의 비가 높아진다. 생분해성 고분자인 폴리카프로락톤(Poly(e-caprolactone,PCL)과 폴리카프로락톤-폴리에틸렌글리콜-아민(Poly(e-caprolactone)-Poly(ethylen glycol-$NH_2$))의 블럭공중합체를 혼합한 비율을 조절하여 전기방사법으로 방사함으로써, 세포와의 친화도를 조절하였다. PEG and amine의 비율과 콜라겐의 영향으로 손상된 세포의 성장을 촉진시키는 효과를 기대할 수 있는 생분해성 복합 나노섬유를 제작 및 특성 분석하였다.

• Elastomers and Composites
• /
• 제22권1호
• /
• pp.11-19
• /
• 1987

A coil pyrolyzer and processor-controlled gas chromatograph were used for analysis of rubber for compounding ratio of the single and blend rubber vlucanizates. Variables such as sample size, pyrolysis temperature, time allowed for pyrolysis, the column packing material, its length and programmable temperature for gas chromatography were examined to obtain optimum condition for application to NR, BR and SBR blends. By application fixed conditions, three kinds of standard curves were finally obtained from thirty samples of blend vulcanizates which were prepared in the pilot plant, NIRI. It is possible to determine rubber composition and their ratio in NR, BR and SBR products by pyrolysis.

• Elastomers and Composites
• /
• 제7권1호
• /
• pp.21-37
• /
• 1972

We have studied the blending effects of Diene NF 35R and Turfdene 1000R at various blending ratios 100/0, 70/30, 50/50, 30/70, 0/100, and of carbon black NAF and ISAF at various compounding ratios of 55 PHR, 65PHR, 75PHR for tyre tread rubber. As the results, it was found that; 1. For tyre tread rubber, as the blending ratio, Diene NF 35R/Turfdene 1000R, indicated 30/70, the physical properties we examined were most excellent. 2. Excellent result was obtained in case of carbon black compounding ratio of 63PHR. The compounding of ISAF made better result than that of HAF for tensile strength, tearing strength, and abrasion quantity. 3. Heat buildup obtained from compounding carbon black HAF indicated low temperature than that from compounding carbon black ISAF. As the compounding amount of carbon black increased, the heat buildup improved, and as the blending amount of Diene NF 35R decreased, the heat buildup dropped. 4. Carbon black was more efficient to Turfdene 1000R than to Diene NF 35R. 5. In this pysical properties, mooney viscosity, and mooney scorch time, as the compounding amount of carbon black increased, the values of mooney viscosity increased, but that of mooney scorch time dropped.

• 한국전기전자재료학회논문지
• /
• 제16권9호
• /
• pp.826-832
• /
• 2003

Blending effects for generating a pretilt angle in nematic liquid crystal (NLC) with negative dielectric anisotropy on the blended polyimide (PI) of homeotropic and homogeneous alignment surface were studied. Also, we investigated the EO performances for the advanced VA- $\pi$ cell using this homeotropic blended PI surface. A many decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with side chain type was measured, and the tilt angle decreased as blended ratio and rubbing strength increase. However, a small decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with main chain type was measured. The blended effects for generating a pretilt angle were clearly observed, and the many decrease of tilt angle can be achieved by using the blended PI surface. The electro-optical (EO) characteristics using the advanced VA- $\pi$ cell using the homeotropic blended PI surface than that of conventional VA cell can be improved. We suggest that the developed advanced VA-$\pi$ cell on a homeotropic blended PI surface is a promising technique for the achievement of a fast response time, and a high contrast ratio.

• Elastomers and Composites
• /
• 제6권2호
• /
• pp.47-63
• /
• 1971

We have studied the blending effects of Diene 33R and styrenebutadiene rubber at various blending ratios of 100/0, 70/30, 50/50, 30/70, 0/100, and of carbon black HAF and ISAF at various compounding ratios of 55 PHR, 65 PHR, 75 PHR for tyre tread rubber. As the results, it was found that ; 1. For tyre tread rubber, when the blending ratio, Diene NF 35R/SBR 1778, indicated 30/70, the physical properties we examined were most excellent. 2. Excellent result was obtained in case of carbon black compounding ratio of 65 PHR. The compounding of ISAF made better result than that of HAF for abrasion quantity, tearing strength, and tensile strength. 3. Heat buildup obtained from compounding carbon black HAF indicated low temperature than that from compounding carbon black ISAF. As the compounding amount of carbon black increased, the heat buildup improved. And as the blending amount of Diene NF 35R decreased, the heat buildup dropped. 4. Carbon black was more efficient to SBR than to Diene Rubber. 5. It is a shortage that elongation revealed low price.

• Elastomers and Composites
• /
• 제59권1호
• /
• pp.17-21
• /
• 2024

Solution styrene-butadiene rubber (S-SBR) is used to improve the wet grip and rolling resistance properties of tire treads. As blending of SBRs can improve the physical properties of tire treads, we investigated the effects of SBR type and blending ratio on the physical properties. Twelve SBR/SBR biblend composites were prepared using four SBRs with different microstructures. The glass transition temperature (T_g), tanδ at 0℃ (wet grip predictor), and tanδ at 60℃ (rolling resistance predictor) were obtained from dynamic mechanical analysis, and were compared to the expected values obtained from the results of single SBR samples. Most of the SBR/SBR biblend composites exhibited crosslink densities lower than the expected values. The tanδ values at 0℃ and 60℃ of the SBR/SBR blend composites deviated from the expected values, with many of the deviations being disadvantageous. Of the twelve composites, six samples had higher 0℃ tanδ values than the corresponding expected values, and four exhibited superior wet grip properties to those of the SBR single samples. In addition, two of the twelve samples exhibited improved rolling resistance properties as compared with the single SBR samples. Finally, four samples exhibited lower T_g values than expected, and the T_g of one composite was lower than those of the single SBR samples.

• Korea-Australia Rheology Journal
• /
• 제17권1호
• /
• pp.1-7
• /
• 2005

Acrylonitrile-Butadiene-Styrene (ABS), polycarbonate (PC) and their alloys are an important class of engineering thermoplastics that are widely used for automotive industry, computer and equipment housings. For the process of recycling mixtures of ABS and PC, it is desirable to know how sensitive the blend properties are to changes in compositions. It was for this reason that blends of virgin ABS and virgin PC at five different compositions, namely, $15\%,\;30\%,\;50\%,\;70%$ and $85\%$ by weight of ABS were prepared and characterised by rheological and mechanical measurements. Rheological properties of these blends in steady, oscillatory and transient step shear and mechanical properties, namely, tensile strength, elongation-at-break and Izod impact strength are reported. The results show that PC behaves in a relatively Newtonian manner, but ABS exhibits significant shear thinning. The ABS-rich blends show a trend that is similar to that of ABS, while PC-rich blends, namely $0\%$ and $15\%$, exhibit a nearly Newtonian behaviour. However, at a fixed shear rate or frequency, the steady shear or the dynamic viscosity varied respectively in a non-mono-tonic manner with composition. Except for $15\%$ blend, the viscosities of other blends fall into a narrow band indicating a wide-operation window of varying blend ratio. The blends exhibited a lower viscosity than either of the two pure components. The other noticeable feature was that the blends at $70\%$ and $85\%$ ABS content had a higher G' than pure ABS, indicating an enhancement of elastic effect. The tensile yield strength of the blends followed the 'rule of mixtures' showing a decreasing value with the increase of ABS content in PC. However, the elongation-at-break and the impact strength did not appear to obey this 'rule of mixtures,' which suggests that morphology of the blends also plays a significant role in determining the properties. Indeed, scanning electron micrographs of the fracture surfaces of the different blends validate this hypothesis, and the $15\%$ blend is seen to have the most distinct morphology and correspondingly different behaviour and properties.

• 공업화학
• /
• 제5권5호
• /
• pp.889-898
• /
• 1994

생분해성 고분자의 실용화 검토를 위하여 생분해성 copolyesterethylene(CPEE)과 vinlyacete(VA)기가 15%인 범용 ethylene vinylacetate(EVA)를 0~100%까지 10% 간격으로 전조성에 걸쳐 용융 블랜드하였다. 용융 블랜드한 시료의 녹는점 변화와 결정화 온도를 시차 주사 열량계로 측정하여 miscibility에 관하여 고찰하였으며 만능시험기를 이용하여 인장강도 및 신장률을 측정하였다. 녹는점 변화와 결정화 온도로부터 CPEE 조성이 10%와 90%일 때 약간의 miscibility를 보였으며, 인장강도값으로부터는 CPEE 조성이 50~80%를 제외한 조성에서 유용한 compatibility를 갖는 것을 알았다. SEM 관찰을 통한 각조성에서의 형태학적 모습으로부터 이들 상용성의 결과를 확인하였으며, 또한 CPEE/EVA 블랜드의 생분해성은 미생물접종 전후의 시편의 변화를 Image analyzer로 관찰함으로써 확인하였다.