• 제목/요약/키워드: Bleached

검색결과 289건 처리시간 0.026초

Affinity of transducin for photoactivated rhodopsin: dependence on nucleotide binding state

  • Clack, James W.
    • BMB Reports
    • /
    • 제41권7호
    • /
    • pp.555-560
    • /
    • 2008
  • The interaction of the rod GTP binding protein, Transducin ($G_t$), with bleached Rhodopsin ($R^*$) was investigated by measuring radiolabeled guanine nucleotide binding to and release from soluble and/or membrane-bound Gt by reconstituting $G_t$ containing bound GDP ($G_t$-GDP) or the hydrolysis-resistant GTP analog guanylyl imidodiphosphate ($G_t$-p[NH]ppG) with $R^*$ under physiological conditions. Release of GDP and p[NH]ppG from $G_t$ occurred to the same extent and with the same light sensitivity both in the presence and absence of added GTP. Significant amounts of $G_t$ without bound nucleotide ($G_{t^-}$) were generated. When ROS containing bleached rhodopsin ($R^*$) were centrifuged in low ionic strength buffer, $G_{t^-}$ remained associated with the membrane fraction, whereas $G_t$-GDP remained in the soluble fraction. These results suggest that $G_t$-GDP and $G_t$-p[NH]ppG have similar affinities for $R^*$. The results also suggest that $G_{t^-}$, rather than $G_t$-GDP, is the moiety which exhibits tight, "light-induced" binding to rhodopsin.

볏짚 추출물을 이용한 한지의 천연색 발현 (Development of Natural Color of Bleached Hanji Dyed with Rice Straw Extractives)

  • 최태호;이연숙
    • 임산에너지
    • /
    • 제22권3호
    • /
    • pp.43-48
    • /
    • 2003
  • 변색, 열화 등의 문제점을 보완하기 위해 볏짚 추출물을 이용하여 미표백 한지의 천연색에 가장 근접할 수 있는 염색법을 개발코자 본 실험을 수행하였다. 한지의 염색성은 염료 추출시간 및 염색시간보다 추출방법의 영향을 가장 크게 받는 것으로 나타났으며, 열수추출물이 냉수추출보다 우수하였다. 열수추출은 추출시간 및 염색시간에 관계없이 대조구와 유사한 색상을 나타냈으며 120분 추출, 45분간 염색한 한지는 대조구와 거의 동일한 색상을 나타냈다. 볏짚의 열수추출물은 천연염료로서 다양한 미표백 자연색의 발현이 가능한 우수한 염색특성을 나타냈다.

  • PDF

O, Eo 및 C/D단계를 이용한 신갈나무 크라프트펄프표백 (Bleaching of Oak Kraft Pulp by O, Eo and C/D Stage)

  • 김동호;백기현
    • 펄프종이기술
    • /
    • 제29권3호
    • /
    • pp.43-50
    • /
    • 1997
  • The purpose of this study was to decrease pollutants of effluents from KP bleaching. Multistage bleaching that combined with O, Eo, and C/D stage was conducted, after optimum bleaching conditions of O, Eo, and C/D stage were determined. Moreover the properties for bleached pulps and pollution level of bleaching effluent were measured by each standard method. Due to increase on the brightness and delignification of pulps by O, Eo, and C/D stage bleaching. It was possible that bleaching sequences were reduced from five stage to four stage. In addition to, OC/DEoD and OC/DEopD bleaching sequences had higher brightness than CEDED bleaching sequence. The pulps bleached by O and Eo stage had higher in tensile index than conventional bleaching sequences with the similar results in burst and tear index. While each bleaching sequences had little differences, bleaching sequences with Eo stage had higher in physical properties than with Eop stage. The pollution level measured by Chemical Oxygen Demand(COD), Biochemical Oxygen Demand(BOD) and Color of bleaching effluents were much lower in combined bleaching sequences of O, Eo and C/D stage than that of CEDED sequence. Particularly, a pollution index of bleaching effluents generated by C/DEoDEB and OC/DEopDED bleaching sequences were lower than that from the other bleaching sequences.

  • PDF

목재 펄프 제조 공정에서의 방사선 효과 및 특성 (Characteristics and Effects of Radiation Treatment on Wood Pulping Process)

  • 원소라;신혜경;전준표;강필현
    • 방사선산업학회지
    • /
    • 제5권3호
    • /
    • pp.227-230
    • /
    • 2011
  • Pulps were separated from wood chips using an Electron beam irradiation (EBI) treatment without a NaOH-AQ (anthraquinone) treatment for cooking. The methods were based on a hot water treatment after EBI and two-step bleaching processes. Chemical compositions and FT-IR spectroscopy demonstrated that the content of lignin and hemicellulose in the bleached wood pulps treated with various EBI dose decreased with an increase of EBI doses. Specifically, the lignin in the bleached with pulps treated at 600 kGy of EBI dose was almost completely removed. Moreover, TGA analysis showed that a thermal stability increased with increasing the content of cellulose but the lignin decomposed slowly over the wide region.

호호바 오일의 모발 보호 효과 연구 (Study on the Effect of Jojoba Oil on the Protection of Hair)

  • 오마틸다;안춘순
    • 한국의류학회지
    • /
    • 제47권1호
    • /
    • pp.52-72
    • /
    • 2023
  • This study examined the effect of Jojoba oil on the protection of virgin black hair and hair damaged by bleaching. Both hair types were treated for 35 days with 100% Jojoba oil or one of two types of hair conditioner, one formulated with 3% of Jojoba oil and the other formulated without Jojoba oil. The effect of protection was examined in terms of the change in the color, tensile stress, weight, and amount of protein leak compared to untreated black hair or bleached hair. The composition of fatty acids in the Jojoba oil was analyzed using the Gas chromatography mass spectrometry. The differences among the three treatments were statistically tested by one-way analysis of variance test and the Duncan post-hoc test at α = .05. The main fatty acid contained in the Jojoba oil was 11-eicosenoic acid (75.14%). Based on the statistical test it was found that 100% Jojoba oil was the most effective in increasing the tensile stress of black hair and the weight of bleached hair after 35 days of treatment.

모발의 탈색 및 퍼머넌트 웨이브 효과에 따른 다-원소금속 성분의 함량 분석 (Analysis of multi-elemental concentration in hair according to effect of permanent wave and bleaching agents)

  • 김준광;하병조
    • 분석과학
    • /
    • 제20권6호
    • /
    • pp.524-528
    • /
    • 2007
  • Variations of the twenty one metal components (Mg, Al, V, Cr, Co, Sr, Ba, Na, K Mn, Fe, Cu, Zn, As, Hg, Pb, Ca, P, Mo, Cd, Sb) were analyzed in human hair sample by inductively coupled plasma mass spectrometry (ICP-MS). The effect of bleach and permanent wave manipulation on the elemental composition of hair were investigated. It was found that the composition of hair varied with hair bleach and permanent wave. Hair sample was collected from male in the age of thirties. Hair sample (0.05 g) was added to the Teflon digestion bomb together with 1.5 mL of nitric acid and an appropriate amount of In as an internal standard. The sample was then decomposed in the microwave digestion system. In normal hair, the contents of V, Cr, Mn, Fe, Co, Cu, Zn, As, Mo, Cd, Sb and P were increased in permanent wave hair, and Mg, Al, V, Co, Sr, Ba, Na and K were increased in bleached hair. But Mg, Al, Sr, Ba, Hg, Pb, Na, K, and Ca contents were decreased with permanent wave hair, Mn, Fe, Cu, Zn, As, Hg, Pb and Ca contents were decreased with bleached hair.

불소를 첨가한 10% Carbamide Peroxide의 법랑질표면 변화와 미백효과 (Effect of Fluoridated 10% Carbamide Peroxide on Enamel Surface Change and Whitening)

  • 이혜진;김현대;김민영;권태엽;김교한
    • 치위생과학회지
    • /
    • 제10권2호
    • /
    • pp.95-100
    • /
    • 2010
  • 본 연구는 자가 미백제로 많이 사용되고 있는 10% Carbamide Peroxide에 NaF를 첨가하여 사용하였으며 미백 후 인공적으로 변색시킨 법랑질의 색, 경도 및 표면변화에 미치는 영향을 관찰하여 다음과 같은 결론을 얻었다. 1. 10% CP 미백처리군과 10% CP+NaF 미백처리군의 색조변화량은 미백 후 색조 변화를 보였으며 통계적으로도 유의한 차이를 나타냈으며 NBS unit로 환산해본 결과 미백처리군 모두 very much에 해당되어 임상적인 의미를 지니는 것으로 나타났다(p<0.001). 2. 10% CP 미백처리군은 미백처리 후의 법랑질 표면경도 값이 미백처리 전에 비해 감소하였으며 통계적으로도 유의한 차이를 나타냈다. 불소첨가 미백군은 미백처리 전과 비교하여 표면경도 값이 거의 변하지않았다. 3. 미백처리 전 후의 법랑질 표면에 대한 미세구조를 분석하기 위해 주사전자현미경과 원자현미경으로 관찰한 결과 미백처리 후 탈회현상에 의해 법랑질 표면이 거칠어짐을 관찰 할 수 있었으며 미백제와 함께 불소를 적용한 처리 군에서는 미백 처리에 의해 거칠어진 법랑질 표면이 불소에 의해 재광화가 됨을 관찰 할 수 있었다. 이상의 결과를 미루어볼 때 10% CP 치아 미백은 법랑질 표면에 영향을 미쳐 미백 후 치아의 시림이나 표면의 형태변화, 경도 값의 감소 등과 같은 부작용을 야기 할 수 있으므로 불소를 포함한 미백제의 사용이나 치아미백 후 불소도포를 시행함으로써 법랑질 표면의 재광화를 유도하여 치아미백 후 발생할 수 있는 여러 부작용을 감소시킬 수 있을 것으로 사료된다.

Effects of Fiber Characteristics on the Greaseproofing Property of Paper

  • Perng, Yuan-Shing;Wang, Eugenei-Chen;Kuo, Lan-Sheng;Chen, Yu-Chun
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
    • /
    • pp.231-237
    • /
    • 2006
  • Grease barrier food containers are commonly used for packaging of fast food, cooked food, and food in general. Greaseproofing is also used for certificate paper and label paper etc. Different pulp raw materials, due to their different fiber morphology and chemical compositions, produce papers of varying characteristics. We used optical photomicroscopy and fiber analysis data to evaluate fiber morphology and traits under various beating conditions in order to understand which pulp raw materials produced superior greaseproofing property when a fluorinated greaseproofing agent was added internally. The experiment studied 9 species of pulps, including 2 softwood (northern pine and radiata pine) bleached kraft pulps which were beaten to 550 and 350 mL CSF, respectively; 3 hardwoods (eucalypts, acacia, mixed Indonesian hardwoods) bleached kraft pulps which were beaten to 450 and 250 mL CSF, respectively; and nonwood fibers of reed, bagasse, and abaca. A fluorinated greaseproofing chemical at 0.12% dosage with respect to dry pulp was added to each pulp preparation and formed handsheets. A total of 67 sets of handsheets were prepared, and their basis weights, thickness, bulks, opacities, wet opacities, air resistance, water absorption and degrees of greaseproofing were measured for an overall evaluation of pulp and freeness on greaseproofing papers. The experimental fiber length, coarseness and distribution characteristics and the greaseproofing results suggest that softwood pulps (radiate pine > northern pine) were superior to hardwood pulps (eucalypts > acacia > mixed Indonesian hardwoods). The unbeaten pulps gave papers with high porosities and nearly devoid of greaseproofing property. Greaseproofing is proportional to air resistance. Among the nonwood fibers, bagasse had the best greaseproofing property, followed by reed and abaca was the poorest. With regards to waterproofing property, hardwood pulps (mixed Indonesian hardwoods > acacia > eucalypts) were better than softwood pulps (northern pine > radiate pine). Among the Nonwood fibers, reed had the highest waterproofing property, and it was followed by abaca, while bagasse had the poorest waterproofing characteristic. In summary, bleached kraft northern pine, eucalypts and reed pulps were best suited for making greaseproofing papers, Freeness of the pulps should be kept at $200{\sim}280mL$ CSF for optimal performance.

  • PDF

35% Hydrogen Peroxide Gel의 미백효과 및 법랑질의 변화 (35% Hydrogen Peroxide Gel in the Whitening Effect and Enamel Changes)

  • 이혜진;김민영;김교한;권태엽
    • 치위생과학회지
    • /
    • 제8권4호
    • /
    • pp.255-260
    • /
    • 2008
  • 본 연구는 전문가 미백제로 많이 사용되고 있는 35% hydrogen peroxide를 사용하여 인공적으로 변색시킨 법랑질에 노출시킨 후 법랑질의 색, 경도 및 표면변화에 미치는 영향을 평가하여 다음과 같은 결론을 얻었다. 1. 35% HP 미백처리군의 색조변화량(${\Delta}E^*$)은 시간의 경과에 따라 색조 변화를 보였으며 통계적으로도 유의한 차이를 나타냈으며 NBS unit로 환산해본 결과 30분 노출군에서는 appreciable에 해당이 되며 1시간, 2시간 노출군에서 각각 much, very much에 해당이 되어 임상적인 의미를 지니는 것으로 나타났다(p < 0.05). 2. 법랑질 표면의 경도를 분석한 결과 대조군에서는 3주동안 거의 변화를 보이지 않은 반면 미백제 노출군에서는 법랑질 표면경도가 매우 낮게 나타났다. 특히 2시간 노출군에서 각 주마다 큰 변화를 보였으며 통계적으로도 유의한 차이를 나타냈다(P < 0.05). 3. 미백처리 전 후의 법랑질 표면에 대한 미세구조를 분석하기 위해 주사전자현미경을 이용하여 관찰한 결과 미백 후 노출시간이 길수록 법랑질 표면의 불규칙한 표면양상을 관찰할 수 있었으며 EDX를 사용하여 법랑질 표면의 성분 분석을 시행해본 결과 모든 군에서 Ca, P의 전반적인 감소를 볼 수 있었으나 통계적으로는 유의한 차이를 보이지 않았다(P > 0.05). 이상의 결과를 종합해 볼 때 35% HP 치아 미백은 미백노출 시간이 길어질수록 법랑질 표면에 영향을 미쳐 술후 치아의 시림이나 거칠어짐과 같은 부작용을 야기 할수 있으므로 짧은 기간 동안 정확한 방법으로 전문가에 의하여 시행되어야 할 것으로 사료된다.

  • PDF

홀로그램 렌즈 배열을 이용한 단층 인식자의 광학적 구현 (Optical Implementation of Single-Layer Perceptron Using Holographic Lenslet Arrays)

  • 신상길
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
    • /
    • pp.126-130
    • /
    • 1990
  • A single-layer Perceptron with 4x4 input neurons and one output neuron is optically implemented. Holo-graphic lenslet arrays are usee for the programmable optical interconnection topology. The hologram is bleached in order to increase the diffraction efficiency. It is shown that the performance of Perceptron depends on the learning rate, the inertia rate, and the correlation of input patterns.

  • PDF