• 대한조선학회논문집
• /
• 제40권5호
• /
• pp.17-25
• /
• 2003

Velocity field behind a container ship model with a rotating propeller has been investigated using PIV (particle image velocimetry) system. Four hundred instantaneous velocity fields were measured at 4 different blade phases and ensemble-averaged to investigate the spatial evolution of vortical structure of near wake within one propeller diameter downstream. The phase-averaged mean velocity fields show the potential wake and the viscous wake formed due to the boundary layers developed on the blade surfaces. The interaction between bilge vortex developed along the hull surface and the tangential velocity component of incoming flow causes to have asymmetric flow structure in the transverse plane.

• 대한기계학회논문집B
• /
• 제29권3호
• /
• pp.322-329
• /
• 2005

The flow characteristics in the blade passage and in the wake region of a low speed axial flow fan have been investigated by experimental analysis using a rotating hot-wire sensor for design and off-design operating conditions. The results show that the tip leakage vortex is moved upstream when flow rate is decreased, thus disturbing the formation of wake flow near the rotor tip. The tip leakage vortex interfaces with blade pressure surface, and results in high velocity fluctuation near the pressure surface. From axial velocity distributions downstream of the fan rotor, large axial velocity decay near the rotor tip is observed at near stall condition, which results in large blockage compared to that at the design condition. Although the wake flow downstream of the rotor blade is clearly measured at all operating conditions, the trough of the high velocity fluctuation due to Karmann vortex street in the wake flow is mainly observed at a higher flow condition than the design flow rate.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.555-556
• /
• 2006

An experimental performance test has been carried out to improve a new blade with higher performance. Most of blades of the fan are designed to be a seamless and simple type, and the flow momentum can generally be evaluated to be comparatively low. Because some portions of the blowing winds can easily be passed through the seamless sharp edge of the blade, and several results studied on these problems have been reported: on the simple blade with edge-line seam, on the simple blade with guide seam. However the results do not show the remarkable increasement of performance of the blades. In this experimental performance test of the blades the design techniques of the blades with double seams (stem seam and edge seam) and comparison tests have been focused. As a first step the comparisons of velocity distributions and flow-rates depending upon the blade are presented in this paper.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.191-193
• /
• 2006

The various wind turbines have been designed and developed for the century. The precision design of the blade and turbine system considering the wind circumstance is required for the high efficiency. In this paper, we investigated the output characteristics of the horizontal and vertical wind turbine related to the wind velocity. Furthermore we will intend to design the wind turbine blade adapted the urban wind circumstance.

• 한국해안·해양공학회논문집
• /
• 제31권1호
• /
• pp.9-16
• /
• 2019

유속의 크기와 블레이드의 기하학적 형상 변화에 따라 발생하는 조류발전용 쉬라우드 시스템 내 유속 변화를 분석하기 위하여 수리모형실험과 수치해석적 방법을 이용하였다. 모형실험을 통해 시스템의 유입부에서 유속 변화와 블레이드 형상변화에 따른 고유 회전수를 계측하였으며, 수치해석을 통해 쉬라우드내 유속 변화를 분석하였다. 실험 유속이 약 28% 증가하고, 익형의 형상을 적용하였을 때, 쉬라우드 유입부에서 계측된 유속은 최대 약 56% 증가하는 경향을 보였다. 한편, 익형 형상을 적용한 블레이드가 설치된 경우 유입부에서의 유속은 일반 블레이드에 비해 최대 14% 증가하는 경향을 보였으며, 회전수 역시 동일 조건에서 가장 높은 수치를 보였다. 수리실험과 수치해석 결과는 약 13%의 오차를 보였으며, 각각의 결과에서 보이는 유속 변화에 대한 경향은 유사하다. 쉬라우드 내 유속 변화를 수치해석으로 분석한 결과 유입부 대비 블레이드 앞부분에서 유속은 최대 1.7배 증가하는 경향을 보였다. 본 연구를 통해 얻은 시스템 내 유속 변화 분석 결과는 효율적인 조류발전용 쉬라우드 시스템 개발에 필요한 기초 자료를 제시할 수 있을 것으로 판단된다.

• 한국해안·해양공학회논문집
• /
• 제21권4호
• /
• pp.301-307
• /
• 2009

국내에서는 조류속이 강한 곳이 다수 존재하여 조류발전 가능성이 높다. 이러한 조류발전은 유속이 빠른 곳에 터빈과 발전기를 설치하여 해수의 운동에너지로부터 전기를 생산하는 발전방식이다. 본 연구에서는 조류발전 시스템에 사용되는 헬리컬 터빈의 효율과 특성치 등을 현장실험을 바탕으로 파악하고자 하였다. 현장실험을 위하여 지름 2.2 m, 높이 2.5 m의 터빈을 제작하고, 울돌목 협수로의 한 쪽 면에 쟈켓구조물을 설치하여 터빈에 대한 실험을 실시하였다. 3-blade 헬리컬 터빈은 1.5 m/s와 2.1 m/s 사이의 유속에서 30 %정도의 효율을,6-blade 터빈은 25 %정도의 효율을 나타내었으며, 이러한 효율은 유속의 변화에 따라 변함없이 거의 일정한 수준을 나타내었다. 3-blade 터빈의 TSR은 2.4정도인 것으로 파악되었고, 6-blade 터빈의 TSR은 1.9정도로 관찰되었다. 이러한 터빈들의 TSR은 유속이 1.5 m/s에서 2.1 m/s로 변화해도 거의 일정하게 측정되었다.

• Journal of Microbiology and Biotechnology
• /
• 제31권6호
• /
• pp.890-901
• /
• 2021

The 11α-hydroxylation of canrenone can be catalyzed by Aspergillus ochraceus in bioreactors, where the geometry of the impeller greatly influences the biotransformation. In this study, the effects of the blade number and impeller diameter of a Rushton turbine on the 11α-hydroxylation of canrenone were considered. The results of fermentation experiments using a 50 mm four-blade impeller showed that 3.40% and 11.43% increases in the conversion ratio were achieved by increasing the blade number and impeller diameter, respectively. However, with an impeller diameter of 60 mm, the conversion ratio with a six-blade impeller was 14.42% lower than that with a four-blade impeller. Data from cold model experiments with a large-diameter six-blade impeller indicated that the serious leakage of inclusions and a 22.08% enzyme activity retention led to a low conversion ratio. Numerical simulations suggested that there was good gas distribution and high fluid flow velocity when the fluid was stirred by large-diameter impellers, resulting in a high dissolved oxygen content and good bulk circulation, which positively affected hyphal growth and metabolism. However, a large-diameter six-blade impeller created overly high shear compared to a large-diameter four-blade impeller, thereby decreasing the conversion ratio. The average shear rates of the former and latter cases were 43.25 s^-1 and 35.31 s^-1, respectively. We therefore concluded that appropriate shear should be applied in the 11α-hydroxylation of canrenone. Overall, this study provides basic data for the scaled-up production of 11α-hydroxycanrenone.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.60.2-60.2
• /
• 2011

This study is to develop a 1kW-class small wind turbine blade which will be applicable to relatively low speed regions. For this blade, a high efficiency wind turbine blade is designed and a light and low cost composite structure blade is adopted considering fatigue life. In this study, shape design of 1kW-class small wind turbine blade for hybrid power generation system is carried out by BEMT(blade element momentum theory). X-FOIL open software was used to acquire lift and drag coefficients of the 2D airfoils used in power prediction procedure. Moreover, pressure and velocity distributions are investigated according to TSR by CFD analysis.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.252-256
• /
• 1999

In this research, the performance predictions of the submersible mixer were investigated. The variation of the performance characteristics by changing the impeller design parameters were discussed through the flow calculation results by using a commercial program, FLUENT. The performance of the submersible mixers is related to the velocity diffusion profiles downstream of the impeller and also the required input motor power to mix the fluid. In this study, the various design parameters such as the number of blade, the hub and tip diameters, the impeller blade profiles and revolution speed of the blades were taken for the fixed values. The blade sweep direction, the chord length distribution along with the radius of the blade and the inlet blade angle were changed to make different testing models. The flow calculation results show the effect of the changed design parameters on the performance of the submersible mixers and also give some helpful information for designing more efficient submersible mixers.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.184-187
• /
• 2005

The blade is an important part of rotating turbomachinery. The blade dynamic strength is of considerable importance as far as the reliability of operation and the life of the engine ate concerned. In this paper, blades are attached to a disk and coupled by means of damping wire. We assumes that the interfaces between the blade and disk dovetails are joined together, which means surface-to-surface contacts without friction. The damping wire is implemented using a beam element and temperature effect in the blade is neglected. Centrifugal forces ale applied by using an angular velocity to all elements in the system. The FEM results showed vibration characteristics in the blade disk system for the cases of a free-standing blade and blades with damping wire, respectively.