• Title/Summary/Keyword: Blade Joint

Search Result 35, Processing Time 0.025 seconds

Exclusion of Na+ and ClIons by the central parenchyma in leaf sheaths of rice and the involvement of lamina joint

  • Neang, Sarin;Kano-Nakata, Mana;Yamauchi, Akira;Itani, Tomio;Maekawa, Masahiko;Mitsuya, Shiro
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2017.06a
    • /
    • pp.237-237
    • /
    • 2017
  • Rice is highly sensitive to salt stress especially in its early growth stage, which thus is one of the major constraints in rice production. In rice plants, salt sensitivity is associated with the accumulation of $Na^+$ in the shoots, especially in the photosynthetic tissues. High salt concentrations in soil cause high $Na^+$ and $Cl^-$ transport to the shoot and preferential accumulation of those ions in older leaves, which decreases $K^+$ in the shoot, photosynthetic activity and grain yield. Salt exclusion capacity at the leaf sheath is therefore considered to be one of the main mechanisms of salt tolerance. In addition, it is suspected that the lamina joint might be involved in the salt transport from leaf sheath to leaf blade. This research aims to determine if leaf sheaths of rice exclude a large amount of $Na^+$ only or other ions such as $K^+$, $Ca^{2+}$, $Mg^{2+}$, and $Cl^-$ as well, to identify tissues in the leaf sheath, which accumulate $Na^+$, and to examine if the lamina joint is involved in the salt exclusion by the leaf sheath. The rice seedlings of salt tolerant genotype FL478 and salt sensitive genotype IR29 were independently treated with NaCl, KCl, $MgCl_2$ and $CaCl_2$, and Taichung 65 and its near-isogenic liguleless line (T65lg) were treated with NaCl. Then, the content of $Na^+$, $K^+$, $Ca^{2+}$, $Mg^{2+}$, and $Cl^-$ ions and their specific location were determined using Atomic Absorption Spectrometer, Ion Chromatograph, and Energy Dispersive X-ray Spectroscopy. Results showed that leaf sheaths of FL478 and IR29 accumulated a large amount of $Na^+$, $K^+$, $Ca^{2+}$, $Mg^{2+}$, and $Cl^-$ ons, and thus excluded them from leaf blades when treated with high concentration of each salt. When treated with NaCl, the highest $Na^+$ concentration was found in the basal part of leaf sheaths of both cultivars. Moreover, energy-dispersive X-ray spectroscopy revealed that the central parenchyma cells of the leaf sheath were the site where most Na, Cl, and K were retained under salinity in the salt tolerant genotype FL478. Also, the concentration of $Na^+$, $K^+$ and $Cl^-$ ions in leaf sheaths and leaf blades was comparable between T65 and T65lg, indicating that the lamina joint may not be involved in the exclusion of $Na^+$, $Cl^-$ and $K^+$ by the leaf sheath from the leaf blade under salinity. Therefore, we conclude that the central parenchyma cells of basal part of leaf sheath are the site that plays a physiological role to exclude $Na^+$ in the shoots of rice without the involvement of the lamina joint.

  • PDF

용접구조물의 제작시 발생되는 변형사례 모음

  • 배강열;권봉재;김희진
    • Journal of Welding and Joining
    • /
    • v.6 no.1
    • /
    • pp.11-20
    • /
    • 1988
  • 이 글에서는 Butt joint에서 발생되는 가로수축, 각변형 그리고 bowing의 관찰을 통해 mechanism을 서술하였고, box beam, damper blade, bulk head, ball tank, 그리고 cylindrical column 등 실구조물의 변형문제에 접근하여 변형예측, 측정 data제시, 그리고 그 해석을 통해 구조물의 변형 크기를 인식케 하고, 동일한 구조물의 제작에 guide가 되고자 하였다. 변형에 대해서는 일률적인 방지방법이 없기 때문에 우선은 구조물의 제작시마다 변형의 크기와 향상에 대한 예측과 함께 변형계측이 계속되어 data가 축적된다면 차후 그 이용 및 응용 효과는 지대할 것이다.

  • PDF

A Study of Tube Angle and Patient's Rotation Angle in Scapular Y View (어깨뼈 후전사방향촬영에서 Tube 각도와 환자의 회전각도 관한 연구)

  • Ahn, ByeoungJu;Lee, JunHaeng
    • Journal of the Korean Society of Radiology
    • /
    • v.7 no.4
    • /
    • pp.271-275
    • /
    • 2013
  • Shoulder bone scan everyday life, sports activities at the side of the shoulder joint, or applying strong force in the lateral occurs. Mainly on upper arm abduction, temple, other rotational dislocation of the shoulder joint gahaejyeo as useful for observing the presence or absence of lesions is used. Shoulder PA oblique projection prevent distortion of the image due to the angle and the most useful diagnostic radiological investigate shooting angle. Shoulder blade body and the acromion and coracoid process Y-view is formed characters. $10^{\circ}$ angle between the shoulder blades and the acromion is the obstruction. $20^{\circ}{\sim}25^{\circ}$ to the Y-view of the humerus head looks superimposed, the position of the shoulder joint and seemed appropriate. $35^{\circ}$ of the humerus head superimposed on the Y-view, but above the humerus head and shoulder joints were distorted. When $45^{\circ}$ elevation observed on the side of the best has come Y-view also acromion and coracoid process is finished.

A Study on Mechanical Shearing Process for Tailored Blank Welding (테일러드블랭크 용접을 위한 전단 공정 연구)

  • 유병길;이경돈
    • Journal of Welding and Joining
    • /
    • v.17 no.2
    • /
    • pp.66-75
    • /
    • 1999
  • Weld bead quality in tailored blank(TB) is critically affected by edge preparation of sheets. The edge quality of prepared sheets for TB can be classified into straightness and the cross section quality of sheared plane such as a ratio of shear face, shear plane angle, etc. In order to have a good edg quality for butt-welding sheets, precision shearing will be recommended. In this paper, the feasibility of a conventional mechanical shearing as the edge preparation for tailored blanks is studyied. It reveals that fine shearing may not be the unique solution as it is generally accepted. To obtain the good shearing condition with a conventional mechanical shearing, experiments were carried out using Tahuchi method. The major parameters affecting a sheared contour are the clearance between upper blade and lower blade, and shear angle. The optimal shearing condition yields a very good straightness along the entire length of the cut, which gives a butt joint gap less than 10% of the base material thickness. The good cross section of sheared plane is also achieved in the optimal shearing condition such as a ratio of the shear face above 65%, a cross section's shear plane angle above 85%, little burr, which is providing finally good weld beads.

  • PDF

Evaluation of Fatigue Damage for Wind Turbine Blades Using Acoustic Emission (음향방출(AE)을 이용한 풍력 블레이드의 피로손상 평가)

  • Jee, Hyun-Sup;Ju, No-Hoe;So, Cheal Ho;Lee, Jong-Kyu
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.35 no.3
    • /
    • pp.179-184
    • /
    • 2015
  • In this study, the flap fatigue test of a 48 m long wind turbine blade was performed for 1 million cycles to evaluate the characteristics of acoustic emission signals generated from fatigue damage of the wind blades. As the number of hits and total energy continued to increase during the first 0.6 million cycles, blade damage was constant. The rise-time result showed that the major aspects of damage were initiation and propagation of matrix cracks. In addition, the signal analysis of each channel showed that the most seriously damaged sections were the joint between the skin and spar, 20 m from the connection, and the spot of actual damage was observable by visual inspection. It turned out that the event source location was related to the change in each channel's total energy. It is expected that these findings will be useful for the optimal design of wind turbine blades.

Stress Analysis of Composite Rotor Blade with Sandwich Structure for Medium Class HAWT (좌굴 및 비선형성을 고려한 중형 수평축 풍력터빈용 샌드위치 복합재 회전날개의 설계 개선에 관한 연구)

  • 공창덕;오동우;방조혁
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.2 no.3
    • /
    • pp.1-9
    • /
    • 1998
  • The exhaustion of fossil fuels and serious environmental pollution put the concern about non-po llution energy into the world. On the developments of technology, wind energy has been spotlighted as a non-pollution energy in many countries. This study has carried out the aerodynamic and structural design procedure of the lightweight composite rotor blades with an appropriate aerodynamic performance and structural strength for the 500㎾ medium class wind turbine system. The previous design, which is shell-spar structure, is redesigned to shell-spar- sandwich structure for light weight. Large deformation problem from light weight is examined by non-linear analysis. Local buckling occurred under lower stress than failure stress. The buckling analysis is accomplished to confirm the safety of the composite blade. The stress analysis around pin hole joint part at hub is carried out and it is confirmed that the pin hole is not failed. The results show that the resonance of redesigned blade does not happen in operation range.

  • PDF

Dynamic Constrained Force of Tower Top and Rotor Shaft of Floating Wind Turbine (부유식 해상 풍력 발전기의 Tower Top 및 Rotor Shaft에 작용하는 동적 하중 계산)

  • Ku, Nam-Kug;Roh, Myung-Il;Lee, Kyu-Yeul
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.25 no.5
    • /
    • pp.455-463
    • /
    • 2012
  • In this study, we calculate dynamic constrained force of tower top and blade root of a floating offshore wind turbine. The floating offshore wind turbine is multibody system which consists of a floating platform, a tower, a nacelle, and a hub and three blades. All of these parts are regarded as a rigid body with six degree-of-freedom(DOF). The platform and the tower are connected with fixed joint, and the tower, the nacelle, and the hub are successively connected with revolute joint. The hub and three blades are connected with fixed joint. The recursive formulation is adopted for constructing the equations of motion for the floating wind turbine. The non-linear hydrostatic force, the linear hydrodynamic force, the aerodynamic force, the mooring force, and gravitational forces are considered as external forces. The dynamic load at the tower top, rotor shaft, and blade root of the floating wind turbine are simulated in time domain by solving the equations of motion numerically. From the simulation results, the mutual effects of the dynamic response between the each part of the floating wind turbine are discussed and can be used as input data for the structural analysis of the floating offshore wind turbine.

Friction Welding of Dissimilar Hot Die Punch Materials and Its Creep Prediction and Quality Evaluation by AE(I) - FRW and AE+ (열간 금형펀치 제작을 위한 이종재 마찰용접과 고온크리프 실시간 예측 및 AE에 의한 품질평가(Ⅰ) -마찰용접과 AE)

  • Park, Il-Dong;Oh, Sae-Kyoo;Kim, Ji-Su
    • Journal of Ocean Engineering and Technology
    • /
    • v.13 no.3 s.33
    • /
    • pp.77-82
    • /
    • 1999
  • The compleete joining method for dissimilar hot die punch materials and its real-time evaluation method are not available at present. Brazing method has been used for joining them, but it is known that the welded joint by the brazing has the lower bonding efficiency and reliability than the diffusion welding. The friction wleding with a diffusion mechanism in bonding was applied in this study. So, this work was carried out to determine the optimal friction welding conditions and to analyze mechanical properties of friction welded joints of hot die punch materials (STD61 for the blade part of hot die punch) to alloy steel (SCM440 for the shank park of hot die punch) such as plunger. In addition, acoustic emission test was carried out during friction welding to evaluate the weld quality.

  • PDF

Study on Real-Time Weld Quality Evaluation by Acoustic Emission for Production of Drills by Friction Weldiing (마찰용접에 의한 드릴 생산에서의 AE에 의한 실시간 품질평가에 관한 연구)

  • 오세규;윤인진;오정환;오명석
    • Journal of Ocean Engineering and Technology
    • /
    • v.7 no.2
    • /
    • pp.121-130
    • /
    • 1993
  • A study off riction welding of high speed steel(SKH 51) bar for blade side to carbon steel(STC 3)bar for shank side was carried out experimentally through tensile test, hardness test, microstructure, and acoustic emission (AE) test. So, this paper deals with optimizing the welding conditions and the real-time quality (strength) evaluation of friction weleded joints by acoustic emission technique. The results obtained are summarized as follows: (1) For friction welded joints of SKH 51to STC 3 steel bars, the total upset (U) increases linearly with an increase of heating time (t sub(1)). (2) The determined optimum welding conditions are heating time (t sub(1)) 7-9 sec, upsetting time (t sub(2)) 5 sec, heating pressure(P sub(1)) 12 kg sub(f)mm supper(2), upsetting pressure (P sub(2)) 15 kg sub(f) mm supper(2) and rotating speed (n) 2, 000 rpm, resulting in a computed relationship between the tensile strength of the joint .sigma. (kg sub(f) mm supper(2)) and the heating time t sub(1) (sec) as the following. sigma.=2.39t sub(1)

  • PDF

The Effects of Radix aconiti on the Contraction of Rat's Spinal Cord Injury (부자(附子)의 경구투여(經口投與)가 RAT의 척수손상(脊髓損傷)에 미치는 영향(影響) 및 비교(比較))

  • Lee Geon-Mok;Kim Kyung-Sik;Lee Kang-Chang
    • Journal of Acupuncture Research
    • /
    • v.15 no.2
    • /
    • pp.105-116
    • /
    • 1998
  • Purpose In this study, We observed the recovery process in the ability to move in the hind limbs of the rats whose spinal cord injuries were treated by Radix acouniti(RA). The purpose of this study is to see the effects of Radix acouniti(RA) water extract on the contraction of rat's spinal cord injury. Procedure First, the rats were subjected to hemisectional spinal cord injuries by a scalpel blade. Those rats, then, were divided into three groups: Sham operated rats group and the experimental group, which received the Radix acouniti(RA) water extract, and the control group, which had no treatment. Their recovery in the ability to walk was observed by the Open Field Test (OFT) for 14 days after the injuries. Method The OFT was applied at four points: the hip, knee, ankle joint, and the tail. Each joint was given a movement rating of from 0 to 3, depending on the amount of movement. A movement rating of 0 designates no movement, a 1 designates slight movement, a 2 designates increased movement, and a 3 designates active movement. Slight movement is defined as a joint displaying less than or equal to 30% of that joint range, increased movement is displaying less than or equal to 60% of that joint's range, and active movement is greater than or equal to 90% of that joint's range. Tail movement is also graded on a scale of 0 to 3. A rating of 0 indicates that the tail is down 100% of the time, one of 1 indicates that the tail is down more than 10%, one of 2 shows that the tail is down less than 50% but more than 10% of the time, and one of 3 shows that the tail is down less than 10% of the time. All four ratings were added together and then averaged to arrive at a single score. Results The sham group which did not go through spinal cord injuries showed near normal results on all 3 joints and tail from right after the operation, which one would expect. The RA oral application group showed more effective recovery of movememt function than the control group around 4 days after the spinal cord injuries. However, after 14 days, both groups displayed almost the same degree of movement recovery. The results of this study are summarized as follows: 1. After 14days the spinal cord injuries, movement was recovered in sham operated group, control group, and experimented group in the hip, the knee, the tail and then the ankle of rats, in that order. 2. Around 7 days after the spinal cord injuries, the experimental group proved the effectiveness of the therapy in terms of movement recovery. 3. The level of ALT, ALP, AST in RA treated group was slightly increased. 4. The level of BUN and creatinine in RA treated group was slightly increased. The above results indicate that RA therapy at an early stage can bring about better movement recovery in patients with spinal cord injuries from traffic accidents or industrial disasters. But there is apparent side effect of RA on clinical, therefore the study on this should be continued.

  • PDF