• 한국유체기계학회 논문집
• /
• 제14권2호
• /
• pp.5-10
• /
• 2011

The purpose of this study is to develop a software for the performance evaluation and blade design of a pitch-controlled HAWT using BEMT(Blade Element Momentum Theory) with Prandtl's tip loss. The HERACLES V2.0 software consist of three major part ; basic blade design, aerodynamic coefficient mapping and performance calculation including stall or pitch control option. A 1MW wind turbine blade was designed at the rated wind speed(12m/s) composing five different airfoils such as FFA-W-301, DU91-W250, DU93-W-210, NACA 63418 and NACA 63415 from hub to tip. The mechanical power predicted by BEMT at the rated wind speed is about 1.27MW. Also, CFD analysis was performed to confirm the validity of the BEMT results. The comparison results show good agreement about the error of 6.5% in rated mechanical power.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권6호
• /
• pp.669-676
• /
• 2006

The optimum design and the performance analysis software called POSEIDON for the HAWT (Horizontal Axis Wind Turbine) is developed by use of BEMT, which is the standard computational technique for prediction of power curves of wind turbines. The Prandtl's tip loss theory is adopted to consider the blade tip loss. The lift and the drag coefficient of S-809 airfoil are predicted via X-FOIL and the post stall characteristics of S-809 also are estimated by the Viterna's equations.$^{[13]}$ All the predicted aerodynamic characteristics are fairly well agreed with the wind tunnel test results. performed by Sommers in Delft university of technology. The rated power of the testing rotor is 20kW(FIL-20) at design conditions. The experimental aerodynamic parameters and the X-FOIL data are used for the power Prediction of the FIL-20 respectively The comparison results shows good agreement in power prediction.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.847-847
• /
• 2004

Automobile cooling fans are operated with a radiator module. To design low noise, high performance cooling fan, radiator resistance should be considered in the design process. The system (radiator) resistance reduces axial velocity and increases effective angle of attack. This increasing effective angle of attack mechanism causes blade stall, performance decrease and noise increase. In this paper, To analyze fan performance, freewake and 3D CFD calculations are used To design high performance fan with consideration of system resistance, optimal twist concept is applied through momentum and blade element theory. To predict fan noise, empirical formula and acoustic analogy methods are used.

• 한국항공우주학회지
• /
• 제41권3호
• /
• pp.173-184
• /
• 2013

본 연구에서는 프로펠러나 헬리콥터 로터와 같은 회전체의 공력 최적 설계를 위한 다단 최적 설계 프레임워크를 제안한다. 이 프레임워크는 플랜폼 설계와 단면의 형상 설계를 반복적으로 수행하는 설계 전략을 통해 회전체의 공력 성능 향상을 목표로 한다. 플랜폼 설계의 단계에서는 유전 알고리즘과 2차원 CFD 데이터베이스 기반의 깃 요소 모멘텀 이론을 이용하여 빠른 시간에 회전체의 공력 특성을 평가하여 최적점을 탐색하였다. 플랜폼 설계 후 단면에 유입되는 유동 조건을 예측하여 단면 형상 최적 설계를 수행하였다. 설계 과정에서 보다 면밀하게 유동 특성이 분석될 수 있도록 2차원 N-S 해석자와 민감도 기반의 최적화 알고리즘을 통해 최적해를 탐색하였다. 단면 형상이 설계된 후에는 최적의 유동 조건을 산출할 수 있도록 플랜폼 설계를 반복적으로 수행하였다. 본 프레임워크를 1kW급 전기추진용 항공기 프로펠러 설계에 적용하여 그 유효성을 3차원 N-S 해석과 풍동 실험을 통해 검증하였다. 설계 후, 풍동 실험 결과를 기준으로 약 5%의 프로펠러 효율 증가를 얻을 수 있었다.

• 한국해양환경ㆍ에너지학회지
• /
• 제17권3호
• /
• pp.167-173
• /
• 2014

본 연구에서는, 블레이드 요소-모멘텀 이론을 바탕으로, 최대 출력계수를 갖는 직경 80 cm의 실험실용 수평축 조류 터빈의 형상을 제시하고, 블레이드 피치각이 변할 때 출력계수의 변화 경향을 조사하였다. 또한 ANSYS-Fluent를 이용한 전산유체해석을 실시하여, 주어진 블레이드 피치각에 대하여 블레이드 요소-모멘텀 이론으로 계산한 출력계수를 검증하였다. 전산유체해석에는 계산 영역의 직경과 길이를 조류 터빈 반경의 15배로 하였고, 계산 영역의 경계에는 열린 경계조건을 인가하였다. 블레이드 요소-모멘텀 이론과 전산유체해석으로 계산한 조류 터빈의 최대 출력계수 약 48%로 서로 잘 일치하였다. 블레이드 피치각을 증가한 경우에는 두 방법으로 산출한 출력계수가 모두 감소하는 경향을 보였고, 그 값들도 서로 유사하였다. 이로부터, 블레이드 요소-모멘텀 이론을 기반으로 설계한 조류 터빈 형상 및 다양한 조건에서 대한 출력계수의 신뢰성을 확인하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제7권1호
• /
• pp.16-27
• /
• 2014

Double-blade vertical axis wind turbines (DB-VAWTs) can improve the self-starting performance of lift-driven VAWTs. We here propose the quadruple-multiple streamtube model (QMS), based on the blade element momentum (BEM) theory, for simulating DB-VAWT performance. Model validity is investigated by comparison to computational fluid dynamics (CFD) prediction for two kinds of two-dimensional DB-VAWT rotors for two rotor scales with three inner-outer radius ratios: 0.25, 0.5, and 0.75. The BEM-QMS model does not consider the effects of an inner rotor on the flow speed in the upwind half of the rotor, so we introduce a correction factor for this flow speed. The maximum power coefficient predicted by the modified BEM-QMS model for a DB-VAWT is thus closer to the CFD prediction.

• 한국유체기계학회 논문집
• /
• 제15권1호
• /
• pp.21-26
• /
• 2012

In this investigation, the aerodynamic performance evaluation of a 1MW class blade has been performed with the purpose of the verification of target output and its clear understanding of flow field using CFD commercial code, ANSYS FLUENT. Before making progress of CFD analysis the HERACLES V2.0 software based on blade element momentum theory was applied for confirmation of quick and approximate performance in the preliminary stage. The blade was designed to produce the target output of a 1MW class at a rated wind speed of 12m/s, which consists of five different airfoils such as FFA W-301, DU91-W250, DU93-W-210, NACA 63418 and NACA 63415 from hub to tip. The mechanical power by CFD is approximately 1.195MW, which is converted into the electrical power of 1.075MW if the system loss is considered to be 0.877.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.155-162
• /
• 2010

Recently, due to high oil prices and environmental pollution issues, interest of alternative energy development increases and the related research is widely conducted. Among those research activities the tidal stream power generation utilizes the tidal flow as its mechanical power resource and less depends on the environmental condition for installation and operation than other renewable energy resources. Therefore the amount of power generated is quite consistent and straightforward to predict. However, research on the tidal stream energy conversion turbine is rarely found. In the present study, two numerical methods were developed and compared for the open water Momentum Theory, which is widely used for wind turbines, was adopted. The moving reference frame method for Computational Fluid Dynamis solver were also used. Hybrid meshing was used for the complex geometry of turbines. The analysis results using each method were compared to figure out a better method for the performance prediction.

• 신재생에너지
• /
• 제7권4호
• /
• pp.50-57
• /
• 2011

A wind turbine simulation program for the coupled dynamics of aerodynamics, elasticity, multi-body dynamics and controls of turbine is newly developed by combining an aero-elastic code and a multi-body dynamics code. The aero-elastic code, based on the blade momentum theory and generalized dynamic wake theory, is developed by NREL(National Renewable Energy Laboratory, USA). The multi-body dynamics code is commercial one which is capable of accounting for geometric nonlinearity and twist deflection. A turbulent wind load case is simulated for the NREL 5-MW baseline wind turbine model by the developed program and FAST. As a result, the two results agree well enough to verify the reliability of the developed program.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.396-401
• /
• 2004

In this paper, a 1MW HAWT(FIL-1000) rotor blade has been designed by BEMT(Blade Element Momentum Theory) with Prandtl's tip loss. Also, a 3-D flow and performance analysis on the FIL-1000 rotor blade has been carried out by using the 3-D Navier-Stokes commercial solver (CFX-5.7) to provide more efficient design techniques to the large-scale HAWT engineers. The rated power and itsapproaching wind velocity at design point (TSR=7.5) are 1MW and 9.99m/s respectively. The rotor diameter is 54.5m and the rotating speed is 26.28rpm. Airfoils such as FFA W-301, DU91-W-250, DU93-W-210, NACA 63418, NACA 63415 consist of the rotor blade from hub to tip. Recent CFX version, 5.7 was adopted to simulate 3-D flow field and to analyze the performance characteristics of the rotor blade. Entire mesh node number is about 730,000 and it is generated by ICEM-CFD to achieve better mesh quality The predicted maximum power occurringat the design tip speed ratio is 931.45kW. Approaching to the root, the inflow angle becomes large, which causesthe blade to be stalled in the region. Therefore, k-$\omega$ SST turbulence model was used to predict the quantitative flow information more accurately. Application of commercial CFD code to optimum blade design and performance analysis was proved to be more effective environment to HAWT blade designers.