• Information Display
• /
• v.22 no.4
• /
• pp.34-44
• /
• 2021

90년대 초 LCD (Liquid Crystal Display)는 연관된 반도체 산업과 함께 제2산업의 쌀로 불리며 정부와 관련업계의 높은 관심 속에 큰 성장을 이루었다. 삼성은 일본 기업에 비해 LCD 개발을 늦게 시작했지만 패널 대형화와 넓은 광시야각을 구현한 PVA (Patterned Vertical Alignment) 모드 (mode)를 실현하고, 여기에 더하여 측면 시인성 문제까지 해결한 공정이 단순하며 높은 대비비를 구현하는 SPVA (Super Patterned Vertical Alignment) 및 PSVA (Polymer-Stabilized Vertical Alignment) 모드를 개발하였다. 이와 동시에 새로운 액정 주입 방식인 ODF (One Drop Filling) 기술을 최초로 양산에 접목함으로써 LCD 산업에서 경쟁사들이 따라올 수 없는 훨씬 앞선 제1 주자가 되었다. 이 보고서는 삼성이 SPVA와 PSVA 모드를 역경 속에서 타사들과 어떻게 경쟁하며 발전시켜 왔는가에 대한 내용과 ODF 기술에 대해 삼성의 고유 자산권을 침해하지 않는 범위 내에서 서술하고자 한다. ※ 대비비: 화면의 백색상태 (white state)와 암흑 상태 (black state)의 광비 (光比)

• Animal Bioscience
• /
• v.34 no.12
• /
• pp.2012-2022
• /
• 2021

Objective: In most retail centers, primal pork cuts for sale are usually prepared into retail-ready slices and overwrapped with air-permeable plastic film. Also, meat of Korean native black pig (KNP) is reputed for its superior quality, however, its shelf life during retail display has not been studied. Thus, the objective of this study was to evaluate shelf life of prepackaged retail-ready KNP belly and shoulder butt slices during refrigerated display. Methods: Bellies and shoulder butt obtained at 24 h post-mortem from finishing KNP were used. Each belly or shoulder butt was manually cut into 1.5 cm-thick slices. The slices in each cut type were randomly taken and placed on white foam tray (2 slices/tray) overwrapped with polyvinyl chloride film. The retail-ready packages were then placed in a retail display cabinet at 4℃. Shelf life and sensory quality of the samples were evaluated on day 1, 3, 6, 9, 12, and 15 of display. Results: The shoulder butt reached the upper limit (20 mg/100 g) of volatile basic nitrogen for fresh meat after 9 days while, the belly remained within this limit throughout the display time (15 days). Both the cuts reached a thiobarbituric acid reactive substances level of above 0.5 mg malondialdehyde/kg after 9 days. The a^* (redness) values remained unchanged during first 9 days in both cuts (p>0.05). After 9 days, off-flavor was not found in either cut, but higher off-flavor intensity was found in shoulder butt after 12 days. The shoulder butt was unacceptable for overall eating quality after 12 days while, belly still was acceptable after 12 days. Conclusion: The belly showed a longer shelf life compared to the shoulder butt, and a shelf life of 9 and 12 days is recommended for the prepackaged retail-ready KNP shoulder butt and belly slices, respectively.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.1
• /
• pp.36-38
• /
• 2013

Eight sample panels using an indium tin oxide(ITO)-coated glass substrate were fabricated, with barrier ribs formed of 55 ${\mu}m$ height and 10 ${\mu}m$ width. The upper and lower substrates were designed with the same panel condition, so a cell gap of 110 ${\mu}m$ was obtained. The charged particles in a cell consisted of $TiO_2$ (for white color) or carbon black (black color), negative or positive charge control agents, and a polymer. The average diameter of the two types of particles was commonly 10 ${\mu}m$, and their q/m value was -4.5 ${\mu}C/g$ and +4.5 ${\mu}C/g$, respectively. The electrically opposite particles mixed by an agitator were loaded into their cells by a simple particle-loading method. The discharging process proceeded at a humidity of 80% and a temperature of $30^{\circ}C$. Reflectivity was measured depending on discharging time, and a hysteresis curve by bias voltage obtained for comparison between the neutralized and non-neutralized panel, in which the superior optical property of the neutralized panel was ascertained.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.575-579
• /
• 2005

A beautiful, flexible active-matrix electrophoretic display (AM-EPD) device is reported. The flexible AM-EPD device has a $40.0{\times}30.0\;mm^2$ display area, measures about 0.27 mm in thickness, weighs about 0.45 g and possesses only 20 external connections. The flexible AM-EPD device displays clear black-and-white images with 5 gray-scales on $160{\times}120$ pixels. The display is free from residual image problems, because we use an area-gray-scale method on $320{\times}240$ EPD elements, each of which is driven with binary signals. Each pixel consists of 4 EPD elements. In addition, since the response time of the electrophoretic material is as long as approximately 400 ms and since the display possesses a large number of EPD elements, we have developed a special driving method suitable for changing EPD images comfortably. A complete image is formed on the AM-EPD device, consisting of a reset frame and several, typically 6, image frames.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.3
• /
• pp.171-176
• /
• 2018

An electronic paper display was fabricated by injecting electronic ink, including white and black particles coated by positive and negative charge control agents (CCA), respectively, into closed cells surrounded by micro-barriers. These two types of charged, colored particles are easily damaged or their charging value can be changed by the injection process; therefore, the electrical and optical properties of the image panel fabricated by the injection method were estimated in this study. The active particle-loading method, proposed as a new electronic ink injection process, was applied, and the electro-optical properties of the resulting three-electrode-type e-paper image panel were analyzed. The reflection rate of the white image-panel fabricated with our new injection method was 24.7%, while that of the same panel fabricated with a previously reported injection method was 19.8%. In addition, the response time was improved by about five times compared to those reported in other publications.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.688-696
• /
• 2014

A slew-rate control method of LCD driver ICs is introduced to increase uniformity between adjacent driver ICs and reduce power consumption. The slew rate of every voltage follower is calibrated by a feedback algorithm during the non-displaying period. Under normal operation mode, the slew rate is dynamically controlled for improving power efficiency. Experimental results show that the power consumption is reduced by 16% with a white pattern and by 10% with a black pattern, and display defects are successfully eliminated.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.23 no.1
• /
• pp.1-11
• /
• 2005

The propose of this study investigated the reproduction of color image on a CRT monitor, for a range of different values of monitor gamma. We have used the GOG(gain-offset-gamma) model of the behavior of CRT. Color difference have been computed in a color space, based on the CIELAB color appearance model. The 133 patch defined linearly color sample and 24 patch defined printing color target were used, and were subjected to the influence of nine different gamma value. The result shows that netural color is increasing the decrease range of luminance black color than white color. These results concern correct in the context display of color reproduction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.38-38
• /
• 2010

계조표현의 방법인 기존의 펄스폭에 의한 방법과 본 연구에서 수행한 4채널의 계조표현 방법에 대해 비교하였다. 펄스폭에 의한 계조표현은 동일한 전압에서 펄스의 폭을 제어하여 계조표현이 가능하며, 4채널의 계조표현은 두 개의 채널로 전극배선을 하여 제작한 소자에 black입자와 white입자를 주입하고 생성된 4개의 서브픽셀의 컬러를 순차적으로 변하도록 하여 계조표현하는 방법이다. 두 가지의 계조표현은 이미지의 구현방법과 지속시간의 차이점이 있다. 4채널의 계조표현이 4개의 서브픽셀을 구동하면, 또 다른 계조표현은 8채널의 계조표현방법으로 이 방법은 하나의 큰 셀에 4개의 서브셀을 만들어 각각 다른 weight를 가지도록 만들어 우수한 계조표현을 구현할 것으로 판단되어 제안하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.125-129
• /
• 2005

Mobile display는 사용자가 이동하면서 화면을 보기 때문에 주변 luminance의 변화에 따라서 contrast ratio 변화가 심하다. 특히 햇빛 아래에서는 Mobile display의 화면을 알아보기 어렵다. 본 연구에서는 주변 조도가 증가할수록 TFT LCD의 black 휘도의 변화율이 white 휘도 변화율보다 크게 작용하여 전체 contrast ratio(이하 CR)가 크게 감소함올 확인하였다. 또한, 반투과형 LCD는 반사창을 통해서 외부 빛올 반사시키기 때문에 주변 조도가 높아도 일정 수준의 CR은 유지할 수 있다. 그러나 투과형 LCD보다 CR이 낮았다. 본 논문에서는 투과형 TFT LCD에 back light 광원으로 LED를 사용하고, photo diode와 LED drive IC를 이용하여 주변 조도의 광량에 따라서 LCD의 back light LED의 휘도를 3단계 조절할 수 있는 회로를 구성하였다. 이렇게 함으로써 주변 조도에 따라 자동으로 back light 휘도 조절이 가능한 결과을 얻었다.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.23 no.2
• /
• pp.45-58
• /
• 2005

The propose of this study investigated the reproduction of color image displayed on a CRT monitor, for a range of different values of monitor gamma. We have used the GOG(gain-offset-gamma) model of the behavior of the CRT. Color difference have been computed in a color space, based on the CIELAB color appearance model. The 133 patch defined linearly color sample and 24 patch defined printing color target were used, and were subjected to the influence of nine different gamma value. The result show that neutral color is increasing the decrease range of luminance black color than white color. These results are of concern in the context of the "correct" display of color reproduction.