• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.189-195
• /
• 2004

Carbon black have not been used as pigment material in cosmetic because of very low density and dispersity, but carbon black have applicable character as black pigment because of non-toxic, stable physico-chemical property, and black colority. In this study, mesoporous silica samples were synthesized by sol-gel reaction using surfactants-template method; TEOS (tetraethoxysilane) - a) PEO/lecithin, b) PEO/polyethylene glycol, c) lecithin/polyethylene glycol in ethanol/water solution. Synthesized organic-inorganic hybrid - silica were heat-treated in N2 condition at 500$^{\circ}C$. Mesoporous silica with black carbon in pore have the effective density and show the good dispersity in both hydrophilic and hydrophobic solvent. Properties of the samples were measured; specific surface area (750㎡/g) and pore size (4-6nm) using BET, pore structure (cylindrical type) using XRD, morphology (spherical powder with 0.1-0.5$\mu\textrm{m}$ partical size) of the samples using SEM. Carbon-silica black color applied to mascara, it shows a dark black colority and good dispersity as compared with the general black color titania pigment. Moreover, it is possible to control the density of black color pigment because it is possible to control pore volume and particle size of mesoporous silica properly. It show the good volume effects in mascara. That is why possible to apply all kinds of cosmetic products.

• Korean Journal of Materials Research
• /
• v.23 no.4
• /
• pp.233-239
• /
• 2013

We collected Seokganju minerals (regions in Gyeryong Mountain, Sangsin-ri, Banpo-myeon, Gongju Chungcheongnam-province), which were used as natural color pigments for grayish-blue during the 15th~16th centuries of the Joseon era, and investigated their crystallographic features to develop a black pigment having a spinel structure. By a Raman analysis, the color of Seokganju under transparent glaze as a pigment for painting was black because hematite ($Fe_2O_3$) in Seokganju was converted to magnetite ($Fe_3O_4$) However, Seokganju into the transparent glaze as a pigment was brown because of hematite ($Fe_2O_3$) and small amounts of maghemite (${\gamma}-Fe_2O_3$) in Seokganju minerals. Only Seokganju mineral is used, it is not suitable for black pigment into the transparent glaze. This study tried to develop a spinel crystal black pigment stabilized by Seokganju with CoO, $Cr_2O_3$, NiO, and $MnO_2$ at $1280^{\circ}C$. A Raman spectroscopy analysis was performed to verify the presence of Mn The results showed that it existed as spinel, and two crystal phases $CoFe_2O_4$ and $MnFe_2O_4$ were mixed. $CoFe_2O_4$ spinel has a dark grayish black color and $MnFe_2O_4$ spinel has a greenish black color, and these two appeared as black. The color of a specimen calcined by adding 6 wt% of pigment mixed with 5 wt% of $MnO_2$ added to lime glaze was analyzed with a UV spectrophotometer. When applying the color pigment, it appeared black stabilized with $L^*$24.23, $a^*$ 0.12, $b^*$ -2.29 at $1260^{\circ}C$ oxidative calcination, With $1240^{\circ}C$ reduction firing, it is appeared black stabilized with low brightness of $L^*$ 23.13, $a^*$ -1.12, $b^*$ 0.54.

• Journal of Powder Materials
• /
• v.28 no.1
• /
• pp.38-43
• /
• 2021

A high NIR-reflective black pigment is developed by Mn doping of Fe2O3. The pigment powders are prepared by spray pyrolysis, and the effect of the Mn concentration on the blackness and optical properties is investigated. Mn doping into the crystal lattice of α-Fe2O3 is found to effectively change the powder color from red to black, lowering the NIR reflectance compared to that of pure Fe2O3. The pigment doped with 10% Mn, i.e., Fe1.8Mn0.2O3, exhibits a black color with an optical bandgap of 1.3 eV and a Chroma value of 1.14. The NIR reflectance of the prepared Fe1.8Mn0.2O3 black pigment is 2.2 times higher than that of commercially available carbon black, and this material is proven to effectively work as a cool pigment in a temperature rise experiment under near-infrared illumination.

• Applied Microscopy
• /
• v.28 no.4
• /
• pp.503-512
• /
• 1998

Fine structure of the cutaneous pigments in the black widow spider, Latrodectus mactans are studied with light and electron microscopes. The cutaneous pigments are only observed in epidermal layer just beneath the cuticle. These pigments are compactly distributed around the spinnerets which located at caudal area of the abdomen. According to the fine structural characteristics of the pigment granules, two main types of guanine pigment granules-carotenoid vesicles and reflecting platelets - are observed in the cytoplasm of the epidermal cells. Morphological features of these pigment granules are characterized as the electron dense carotenoid vesicles and the electron lucent reflecting platelets. Marginal electron density of the carotenoid vesicle is different from that of internal region, whereas the reflecting platelets have laminated crystalline granules. Typiral structures of these pigment granules are very similar to those of invertebrate's chromatophores, especially erythrophores and iridophores. Moreover differentiation of these pigment granules are also originated from the small vesicles of Golgi complexes similarly to those of cutaneous chromatophores.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.29 no.2 s.43
• /
• pp.193-204
• /
• 2003

• Food Science and Preservation
• /
• v.11 no.1
• /
• pp.42-46
• /
• 2004

Each pigments were obtained by ethyl alcohol extraction method, blue and yellow pigment from Gardenia as well as dark brown pigment from Kaoliang. Concentration of these pigments are all 60 Brix, the extraction yields were 0.68, 1.97, 0.63 ％(w/w), respectively. Oil soluble natural black pigment (OSNBP) was composed of soybean oil, water, emulsifier, Gardenia blue and yellow, Kaoliang dark brown etc. Blending ratio of these was 8: 22: 42: 10: 15: 13 (w/w), this mixture was carried out homogenized. Solubility of this OSNBP in soybean oil was appeared the maximum level at about 30∼40$^{\circ}C$ range. OSNBP solubilized black oil was not reseparated at below 20$^{\circ}C$.

• Applied Biological Chemistry
• /
• v.45 no.3
• /
• pp.179-184
• /
• 2002

To examine utilization of Korean black soybean as a natural pigment, the effects of temperature, carbohydrate, organic acid, vitamin C and metal ion were investigated. Korean black soybean pigment was more stable than other anthocyanin pigments when temperature was abused. There was no darkness effect in carbohydrate. In organic acid, the color intensity was increased. The vitamin C addition negatively affected on color of anthocyanin. Among the metal ions tested, $Cu^{2+}$ and $Zn^{2+}$ was not affected but $Mn^{2+}$ makes it unstable. Results indicate that Korean black soybean pigment was more stable than other anthocyanin pigment in various environment at pH 3.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.308-312
• /
• 2003

Recently the trend of new materials development is extensively and very actively progressing in the study of physical and chemical characteristics developing a totally new material along with the study field of recently discovered material modifying physically and chemically characteristics. Among these fields of studies, one method to improve adaptation of inorganic material is the study of mesoporous materials. The most general way to synthesize mesoporous materials is to mold the very systematical mesopore into a corpuscle by using templates(omitted)

• Journal of Conservation Science
• /
• v.35 no.1
• /
• pp.91-98
• /
• 2019

The fragments of a wall painting excavated from among the historical remains of Jeseoksa Temple in Iksan. The extent of the damage to the fragments was examined and an analysis of the components of the pigment was conducted. The results of the component analysis of the pigment confirmed that the white pigment consisted of alkali feldspar and mullite. Although the results of the visual inspection revealed differences in color in the red and black pigments, the main component of the two colors was confirmed to be iron oxide. Red and black pigments are found at the same position. Although differences of color is obvious, those are identified as hematite and magnetite of oxidized steel's affiliation. It is judged that Differences of ingredients happened by external environment's factors.

• Textile Coloration and Finishing
• /
• v.32 no.4
• /
• pp.226-231
• /
• 2020

This study investigated effect of particle sizes of polymer binders for digital textile printing(DTP) pigment inks on touch of fabrics. The polymer binders were synthesized via miniemulsion polymerization of methyl methacrylate(MMA), butyl acrylate(BA), N-ethylolacrylamide(NEA) and methacrylic acid(MAA). The prepared binders were applied to black pigment inks and those black pigment inks were used to dye cotton fabrics. Then, color strength, rubbing fastness, stiffness, surface and bending properties of the dyed fabrics were investigated. Depending on the particle size of the polymer binder used, color strength, friction fastness, stiffness, surface and bending properties change. Generally, the larger the particle size of the polymer binder, the softer properties.