• Korean Journal of Materials Research
• /
• v.15 no.1
• /
• pp.1-5
• /
• 2005

Copper-based leadframe sheets were immersed in two kinds of hot alkaline solutions to form brown-oxide or black-oxide layer on the surface. The oxide-coated leadframe sheets were molded with epoxy molding compound (EMC). After post mold curing, the oxide-coated EMC-leadframe joints were machined to form sandwiched double-cantilever beam (SDCB) specimens. The SDCB specimens were used to measure the fracture toughness of the EMC/leadframe interfaces under quasi-Mode I loading conditions. Fracture surfaces were analyzed by various equipment to investigate failure path. The present paper deals with the failure path, and the cause of the failure path formation with an adhesion model will be treated in the succeeding paper.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.1
• /
• pp.44-52
• /
• 1995

The specimen for laser hardening have been carried out using SM45C which is coated with black paint or graphite for better absorption. Segmented mirror was used in order to produce a square beam ($10{\times}10mm$) at the surface with a homegeneous intensity distribution across the beam. $CO_2$-Laser power was changed from 2kW to 4kW and transfer velocity was varied from 0.1m/min to 2.0m/min. The maximum hardness and case depth of SM45C steel are 790Hv and 1.5mm by laser hardening. When the surface of specimens was melted during laser hardening. the surface hardness of SM45C steel was decreased. The surface hardness of 2 layer coated specimen(black paint: $15.4{\mu}m$, graphite coating: $9.5{\mu}m$) was increased than that of 1 layer coated specimen. It is desirable to prepare 2 or more coating layer on the steel surface in order to sufficient case depth and hardness in laser hardening. The graphite coating on the specimen surface was obtained more uniform temperature distribution than black paint coating in laser hardening process.

• Research in Plant Disease
• /
• v.13 no.3
• /
• pp.216-219
• /
• 2007

Gray mold caused by Botrytis cinerea occurred on Prunus mume Sieb. & Zucc. in an experimetal orchard of Gyeongsangnam-do Agricultural Research and Extension Services in Korea from 2005 to 2007. The symptoms usually started with water-soaking lesions and hollow depression on the fruit surface. The conidia of the pathogen appeared on the surface fruits. The conidia were one celled and mostly ellipsoid or ovoid in shape and were colorless or pale brown in color. The conidia were $6{\sim}17{\times}4{\sim}10{\mu}m$ in size and conidiophores were $15{\sim}30{\mu}m$ in length. The sclerotial formed abundantly on potato-dextrose agar, They were flat or irregular in shape and black in color The optimum temperature for sclerotial formation was $20^{\circ}C$. On the basis of mycological characteristics and pathogenicity test on host plants, the fungus was identified as Botrytis cinerea Persoon: Fries. This is the first report on gray mold of P. mume caused by B. cinerea by in Korea.

• 한국균학회소식:학술대회논문집
• /
• 2014.05a
• /
• pp.25-25
• /
• 2014

Koji molds are comprised of yellow, black and white. Black and white koji molds were recently re-visited by this author and it is concluded that they consists of Aspergillus luchuesnsis, A. niger and A. tubingensis, and the most important species for alcoholic beverage production is A. luchuensis. In the case of yellow koji mold, it is comprised of Aspergillus oryzae, A. sojae and A. tamari. In the case of A. sojae, the species is scarcely isolated from nature and rarely used for industry in Korea. Aspergillus tamari is often isolated from traditional Korean Meju, a fermented soybean product, and the classification of the species is clear. However, in the case of A. oryzae, differentiation between A. oryzae and A. flavus is still in controversy. In this study, we collected 415 strains of Aspergillus flavus/oryzae complex from air, rice straw, soybean, corn, peanut, arable soil and Meju in Korea and we examined the aflatoxin producing capacity of the strains. The norB-cypA, omtA and aflR genes in the aflatoxin biosynthesis gene cluster were analyzed. We found that 367 strains (88.4%) belonged to non-aflatoxigenic group (Type I of norB-cypA, IB-L-B-, IC-AO, or IA-L-B- of omtA, and AO type of aflR), and only 48 strains (11.6%) belonged to aflatoxin-producible group (Type II of norB-cypA, IC-L-B+/B- or IC-L-B+ of omtA, and AF type of aflR). In the case of A. flavus/oryzae strains from Meju, almost strains (178/192, 92.7%) belonged to non-aflatoxigenic group and only 14 strains (7.3 %) belonged to aflatoxin-producible group. It is proposed in this study that non-aflatoxigenic strain from Meju is classified as A. oryzae, considering that Meju is food material.

• Mycobiology
• /
• v.46 no.2
• /
• pp.129-137
• /
• 2018

Black rot disease in orchids is caused by the water mold Phytophthora palmivora. To gain better biocontrol performance, several factors affecting growth and antifungal substance production by Pseudomonas aeruginosa RS1 were verified. These factors include type and pH of media, temperature, and time for antifungal production. The results showed that the best conditions for P. aeruginosa RS1 to produce the active compounds was cultivating the bacteria in Luria-Bertani medium at pH 7.0 for 21 h at $37^{\circ}C$. The culture filtrate was subjected to stepwise ammonium sulfate precipitation. The precipitated proteins from the 40% to 80% fraction showed antifungal activity and were further purified by column chromatography. The eluted proteins from fractions 9-10 and 33-34 had the highest antifungal activity at about 75% and 82% inhibition, respectively. SDS-PAGE revealed that the 9-10 fraction contained mixed proteins with molecular weights of 54 kDa, 32 kDa, and 20 kDa, while the 33-34 fraction contained mixed proteins with molecular weights of 40 kDa, 32 kDa, and 29 kDa. Each band of the proteins was analyzed by LC/MS to identify the protein. The result from Spectrum Modeler indicated that these proteins were closed similarly to three groups of the following proteins; catalase, chitin binding protein, and protease. Morphological study under scanning electron microscopy demonstrated that the partially purified proteins from P. aeruginosa RS1 caused abnormal growth and hypha elongation in P. palmivora. The bacteria and/or these proteins may be useful for controlling black rot disease caused by P. palmivora in orchid orchards.

• Microbiology and Biotechnology Letters
• /
• v.8 no.3
• /
• pp.155-166
• /
• 1980

Studies have teen undertaken to investigate the degree of microbial contamination in the subsidiary materials which have been known as an important source of microorganisms associated with spoilage of fish sausage and fish paste products. Twenty hinds of food ingredients including starch, spices and condiments, 59 samples in total collected from commercial fish sausage processing plants and supermarket in the period of July to October 1979, were examined for standard plate count, coliform and fecal coliform, mold and yeast, thermoduric microorganisms, aerobic sporeformers (mesophilic and thermophilic), anaerobic sporeformers (mesophilic and thermophilic) and sulfide spoilage anaerobes. The results obtained are summarized as follows. 1. Among the food ingredients examined, corn starch, black pepper, hot pepper, onion, garlic, ginger, beef extract and frank marked high bacterial contamination with general and sporeforming microorganisms. And bacterial content of marked samples were generally higher than that of the samples from plants. 2. The high standard plate count caused by high content of these bacteria like thermoduric, mesophilic or thermophilic sporeforming aerobes. 3. Bacterial content of food ingredients such as black pepper and beef extract being used in plants, and black pepper, hot pepper, onion and garlic from the market were exceeded the bacterial standards being enforced in Japan and U. S. A. 4. Average standard plate count was in the range of 10$^4$to 10$^{5}$ /g for black pepper, wheat flour, onion and garlic collected from plants, and 10$^{5}$ to 10$^{7}$ /g for black pepper, hot pepper, onion and garlic from market. No plate count was observed in pepper essence and coloring material. 5. Coliform organism was detected in starch, black pepper, hot pepper, onion, garlic, ginger and gluten that showed high standard plate but no fecal coliform in the samples except black pepper and hot pepper. 6. Average mold and yeast count was 140 to 460/g for corn starch, wheat flour and black pepper from plants, and 10$^3$/g for black pepper and hot pepper from market. No count was observed in the other ingredients. 7. Sulfide spoilage sporeforming anaerobes boiled for 5 min. at 10$0^{\circ}C$ and incubated at 55$^{\circ}C$ was not detected in all the samples examined.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.305-305
• /
• 2017

Seoritae with green cotyledons refers to Korean native black beans harvested when the frost falls because the maturity is late. It is one of the beans preferred by consumers because of its softness and high sugar content. Because of late maturity, if the agricultural work is delayed by weather or agricultural schedule in green cotyledon black soybean (Seoritae), it affects seriously harvest and yield of soybeans. The aim of this study was to investigate the marginal seeding period on June 30, July 10 and July 20 in Cheongju and Jecheon area in Korea to produce stable soybean yield. The yields of green cotyledon black soybean as seeding date in Cheongju area are as follows: Seolitae (Yeoncheon), Seoltae (Goesan) and Seoritae (Gogseong), which increased by 23%, 56%, 23% and 40%, respectively, compare to July 10th to June 30th. As soybean sowing is delayed, the quality of soybean seeds has decreased due to the increase of immature seeds and fungal damaged seeds. The contents of anthocyanin in Cheongju area a functional substance of soybeans, was high on July 20 for Heukcheong, on June 30 for Seolitae (Yeoncheon), on July 10 for Seoritae (Goesan). The yields of Heukcheong and Seolitae (Yeoncheon) in Jecheon area were increased by 5% and 17%, respectively, compare to July 10th to June 30th, while Seolite (Goesan) and Seolite (Gogseong) were high in yields on June 30th. Similarly in Cheongju area, as the sowing period is delayed, the number of immature and mold damaged seeds in Jecheon area increased. The contents of anthocyanin in Jecheon area was high on July 10 for Heukcheong, on June 30 for Seolitae (Yeoncheon) and Seolitae (Goesan). From the above results, Sowing marginal date of green cotyledon black soybeans (Seolitae) in Cheongju area increased 30% in sowing on July 10 and increased 2% in sowing on July 20 compared to June 30. And Sowing marginal date of green cotyledon black soybeans (Seolitae) in Jecheon area increased 2% in July 10 compared to June 30, and the yield decreased rapidly on July 20. We have identified the seeding time limit of green cotyledon black bean in Chungbuk province. It will be possible to provide a variety of crop selection after double cropping of farmers. And by knowing the yield and seed quality of soybean according to sowing date, farmers will observe appropriate sowing period of soybeans for high quality. From the viewpoint of consumers, functional substances of Seoritae will meet the desire for health.

• 한국균학회소식:학술대회논문집
• /
• 2015.11a
• /
• pp.14-14
• /
• 2015

Cellular aspects of sooty mold on walnut leaves were investigated by using light and electron microscopy. A black coating developed on the adaxial leaf surface of a walnut tree. No infestations were found on the abaxial leaf surface with peltate glandular trichomes. Light microscopy showed that fungal complexes from the leaf surface were composed of brown conidia and hyphae. Conidia, with longitudinal and transverse septa, were variable in length ranging from 10 to $30{\mu}m$, and commonly found in clusters, forming microsclerotia. Neither epidermal penetration nor hyphal entrance to host tissues was observed. Based on their morphological characteristics, the fungal complexes were assumed to be Capnodium species. An electron-dense melanized layer was present on the cell wall of multi-celled conidia. Concentric bodies in the fungal cytoplasm had an electron-translucent core surrounded by an electron-dense margin with a fibrillar sheath. Chloroplasts without starch granules in the palisade mesophyll cells of sooty leaves had electron-dense stromata and swollen plastoglobuli. These results suggest that the epiphytic growth of fungal complexes can be attributed to the melanized layer and concentric bodies against a water-deficient environment on the leaf surface. Ultrastructural characteristics of the sooty leaves indicate typical features of dark-adapted and non-photosynthetic shade leaves.

• Elastomers and Composites
• /
• v.51 no.4
• /
• pp.263-268
• /
• 2016

In the polymer shaping process that uses molds, the quality of the molded products is determined not only by the flow of the (molten) polymer but also by the air venting in the cavity. Inadequate air venting in the cavity can cause defects in the product, such as voids, short shot, or black streaks. As it is critical to consider the location and size of the vents for proper venting of the air in the cavity, a method that predicts the flow of air and material is required. The venting of air by the flow of rubber inside the cavity was simulated by using a multi-phase computational fluid dynamics method. Through computer simulation, the interface of rubber and air over time was predicted. Then, the velocity and pressure distribution of the venting air were observed. Our research proposes a fundamental method for analyzing the multi-phase flow of polymer materials and air inside the cavity of a mold.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.1
• /
• pp.100-106
• /
• 1999

Use of chemical preservative for controlling harmful microorganisms in food products has been debated due to public concerns about food quality because of perceived toxic and carcinogenic potential. Thus, use of non toxic natural antimicrobial agents has become essential. This study was investigated to determine the antimicrobial activity of water or ethanol extract of commercially available tea, and of solvent fractionated ethanol extracts obtained from steamed green tea. Both of water and ethanol extracts of green tea(steamed or roasted), oolong tea and black tea exhibited strong antimicrobial activity against gram positive and negative bacteria, but not effective against yeast and mold. Also, antimicrobial activity of ethanol extract of 4 different kinds of tea was stronger than that of water extract. Among 4 different tea, ethanol extract of steamed green tea was further fractionated. One thousand g/disk buthanol extract had the strongest antimicrobial activity against bacteria and mold. The concentration of the antimicrobial activity of buthanol extract in tested microorganisms ranged from 125~1000 g/disk except for Rhizopus javanicus. Antimicrobial activity of buthanol extract of steamed green tea was not destroyed by heating at 100oC for 60 min and at 121oC for 15 min, which is very stable over heat treatment. The inhibitory effect of the buthanol extract on the growth of Listeria monocytogenes and Staphylococcus aureus was investigated. Growth of both strains was started in the presence of 250 and 500 g/ml after 12 and 24 hour respectively, whereas complete inactivation of both strains was occurred in the presence of 1000 g/ml.