• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.246-248
• /
• 2005

The power plants have a loading dock and unloading device for the diverse kinds of fuel such as the bituminous coal and natural gas imported by the sea from all over the world. To unload the coal in the ship not only in the environment-friendly manner but also in the cost-effective way, the new type of heavy equipment loaded with additional features as well as excavator and the remote controller to maneuver this equipment are developed. This heavy equipment, which can be used to unload the coal in the ship in conjunction with CSU (Continuous Ship Unloader), and the remote controller are endorsed by the related code and laws. With the remote controller, the field workers can operate the unloading equipment at the remote place far from the equipment as well as in the cabin for themselves without tile remote controller.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.4
• /
• pp.165-171
• /
• 1999

A study on the synthesis of zeolite 4A using the bituminous coal fly ash from power plant was carried out. This study aims to investigate possibility for detergent builder with synthesized zeolite. It was examined at the crystallization conditions of atmospheric pressure and that of pressurization. The synthesized zeolite was proved to be Zeolite 4A type by means of the XRD and SEM analysis, and then the synthesized zeolite was used as an absorbent the remove the $Ca^{2+}$ ions in the water. In this study, commercial zeolite and synthesized zeolite reached equilibrium within 10 and 30 minutes respectively. The amount of $Ca^{2+}$ ions exchanged by the commercial zeolite, atmospheric pressure zeolite (zeolite A) and pressurized zeolite(zeolite PA) were 391mg/L(as $CaCO_3$), 323mg/L(as $CaCO_3$) and 355mg/L(as $CaCO_3$) respectively.

• Journal of Environmental Health Sciences
• /
• v.29 no.3
• /
• pp.79-85
• /
• 2003

The purpose of this study was to disclose the manufacturing process of activated carbon using coal. It investigated the influences on the physical properties that were manufactured activated carbon by using anthracite coal, bituminous coal under carbonizated and activated condition. The adsorption capacities of organic material were superior when the ash content was lower 5∼10%, and the iodine value was about 1,000 mg/g, the adsorption capacity decreased rapidly when ash content was over 15%. The manufactured activated carbon were found characteristics such as the iodine value was over 1,031 mg/g, the specific surface area was over 1,032 $m^2$/g and the hardness was over 95% under manufacturing conditions which were carbonizated temperature of $600^{\circ}C$( 180 minute), activated temperature of 95$0^{\circ}C$(210 minute) and steam weight of 6 $m\ell$/min.100 g coal.

• Journal of Mechanical Science and Technology
• /
• v.15 no.2
• /
• pp.239-247
• /
• 2001

Measured radiative heat fluxes on the furnace exit plane of a heavy duty power boiler of steam output 1650 T/h are discussed. A high-ash pulverized bituminous coal was used. Such measurements are necessary to improve heat fluxes inside a steam boiler furnace was manufactured. An extra small heat radiation sensor was placed in the water cooled head of the probe. The sensor had no direct contact with furnace gases and measured only the radiant energy. There was no exposure to convective heat transfer. With the radiometric probe, one can obtain a spherical indicatrix of radiation intensity as well as hemispherical radiative heat flux incident on any surface passing through a measuring point inside the furnace. Thus, the quantity of radiation energy, passing through the furnace exit plane, to the convective heating surfaces and the quantity of radiation energy going in the opposite direction were measured. A formula for relative radiative heat flux on the furnace exit plane has been proposed.

• Journal of architectural history
• /
• v.26 no.6
• /
• pp.55-66
• /
• 2017

This study attempted to analyze how dancheong for palace tablets during the Joseon period was designed as related to what plans and what materials were being used. It also investigated how this unique culture formed. The results found the following: First, the tablet dancheong unveiled through literature was designed using diverse techniques such as jinchae and yeokcheongchil. In jinchae, shell powder was applied to the tablet as the first lacquering, and then was colored. Second, in lacquer, maechil, chaesaekchil and jeohyeoptaechil were used. In yeokcheongchil, vegetable black, oil ash and perilla oil were applied to bitumen. Third, during the Joseon Dynasty, dancheong was applied to a tablet after first lacquering just like the danpihoe lacquering of Jiangsu Sheng, China. This tablet dancheong technique was developed based on a unique Korean lacquering culture that had been handed down from ancient times.

• Economic and Environmental Geology
• /
• v.21 no.1
• /
• pp.85-96
• /
• 1988

Geophysical well logging at various coal fields were carried out to study the characteristic response of domestic coal seams. Also a computer program is developed for quantitative analysis of coal logging data. Most coal seams penetrated by the drill holes, where the well logging were carried out, showed poor thickness and quality, and were severely altered. Therefore, majority of log data are inadequate for detailed quantitative analysis. The logs show, however, typical characteristics with related to coal seams, but interpretation should be made with caution because certain log response of demestic coals, mostly anthracite, are quite different to those of foreign coals, mostly bituminous. The developed comuter program has been proved as an effective one for identification of coal seams and lithology anslysis, and is expected to be succesfully used for coal quality analysis in cases of more diversified log data of good quality being obtained.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.159-162
• /
• 2000

The purpose of this study is to develope an accurate procedure for measuring the glass content of fly ash produced by bituminous coal to assist in predicting their behavior in concrete. Quantitative mineralogical compositions of fly ashes were obtained by internal standard method using powder X-ray diffraction analysis. In the X-ray diffraction method, the specimen and standard fluorite were cautiously mixed and pulverized to 22$\mu$m in wet process so as to avoid the prefered orientation of the crystal and microabsorption effect of X-ray. calibration curve were fitted for several references peaks of four phases:$\alpha$-quartz. mullite, magnetite, hematite. The amount of glass was calculated by subtracting the amount of crystal phase and loss on ignition from the total amount. Glass content determined with this method ranged from 66.7 to 75.wt%.

• Journal of the Korean institute of surface engineering
• /
• v.27 no.6
• /
• pp.347-358
• /
• 1994

Estimation of durability for corrugated steel pipe(CSP) has been evaluated by using several analytical methods. This study, using a plain hot-dip galvanized CSP as the base line, addresses additional coatings such as polymers sand bituminous coatings that may be used to achieve a desired design life of at least 50years. The behavior of both the soil side and the effluent side of the pipe have been studied. It is estimated that CSP generally provides outstanding dura-bility with regard to soil side effects, and that virtually any required service life can be attained by selecting appropri-ate coatingss and/or thickness of steel substrate. This study is limited to storm drainage systemss carrying naturally oc-curring surface water only. The recommendation in this report do not apply to sanitary or industrial waste sewers or other conduits used to carry corrosive effluents.

• Journal of the Korean Society of Combustion
• /
• v.15 no.2
• /
• pp.19-26
• /
• 2010

Combustion behavior of pulverized coal particles in a post-combustion gas reactor was investigated. Radiation emission from coal particles were analyzed by direct photograph and $CH^*$ radical chemiluminescence intensity. Coal particles were sampled during the combustion and were observed by scanning electron microscopy (SEM) and cross section micrograpy technique. Two coal types(one bituminous and one subbituminous coals typically used in the Korean power plants) were tested at typical combustion environment. Gas flow conditions were controlled to represent temperature and oxygen concentration. Experimental data were discussed along with conceptual descriptions of pulverized coal combustion, where particle heat-up, release and combustion of volatiles, and char combustion were sequentially progressed.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.05a
• /
• pp.158-162
• /
• 1995

Synergistic effects of mixed solvents, especially with mixtures of CS$_2$ with electron donor solvents, in inducing desired structural changes in coals were studied by solvent swelling techniques in addition to differential scanning calorimetric analyses. Mixed solvents exhibit significant synergistic efficacy in swelling the coal structure of medium bituminous rank. This synergy effect appears to be physical origin that is closely related to matching solubility parameters. Since the swollen coal structure can be obtained by mixed solvents with CS$_2$ at room temperature instead of high temperature, many possible technological pathways for economical utilization of coal might be sought.