• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.5
• /
• pp.447-455
• /
• 2014

In this paper, we consider a representative integral imaging method in glasses-free 3D image processing and propose a prioritized transmission scheme for guaranteeing a received video quality in error-prone environments. According to the correlation of pixels consisting of each voxel of integral image, we set the priority differently and apply the modulation level according to this priority value. That is to say, the corresponding pixels with small variance are set to a high priority and transmitted by using a low level modulation that is robust under transmission errors, but the corresponding pixels with greater variance are set to a lower priority and transmitted by using a high level modulation that has a high bit error rate but fast transmission rate. Result shows that the proposed scheme that applies the error-robust modulation level to the important image bit stream with the high priority improves the peak to sidelobe ratio (PSR) of the received 3D image, compared with a typical method that use the same modulation level without distinction of priorities.

• Journal of Broadcast Engineering
• /
• v.4 no.1
• /
• pp.32-43
• /
• 1999

This paper addresses schemes which securely transmit voice and data information under the worst communication environment using the frequency hopping(FH) communication system to avoid monitoring or interference against enemy. In case of using the conventional FEC and bit interleaving scheme. the processing time for error control coding and bit interleaving due to system complexity is highly demanded. In this paper. the effective information coding scheme of maprity error correction and block interleaving compatible to the proposed FH communication system is proposed to transmit voice or data (I6Kbps. 4.8Kbps. 2.4Kbps. 1.2Kbps, O.6Kbps) under the worst FH communication channel. In transmitter. low rate data signals are configured to majority data blocks. and transmitted repeatedly to FH channel which are structured to 20Kbps hopping frame cells. In receiver. the received data are decoded block by block, and taken majority error correction. Consequently. burst or random errors are corrected at the block deinterleaver and the majority decoder. The proposed coder structure reduces the coding/decnding processing time as well as the jamming interferences, and further simplify the data processing complexity for FH communication. Improved performance of the proposed scheme was verified under simulated channel environments.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.12
• /
• pp.8-16
• /
• 2010

NAND multilevel cell (MLC) flash memory is widely issued because it can increase the capability of storage by storing two or more bits to a single cell. However if a number of levels in a cell increases, some physical features like cell to cell interference result cell voltage shift and it is known that a VT shift is unidirectional. To reduce errors by the effects, we can consider error correcting codes(ECC) or signal processing methods. We focus signal processing methods for the cell to cell interference voltage shift effects and propose the algorithms which reduce the effects of the voltage shift by estimating it and making level read voltages be adaptive. These new algorithms can be applied with ECC at the same time, therefore these algorithms are efficient for MLC error correcting ability. We show the bit error rate simulation results of the algorithms and compare the performance of the algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.9-17
• /
• 2004

Adapt ive and fixed step size PC (power control) schemes for accommodating voice, video, and data are evaluated according to the different PC command rates and their effects on integrated Voice/Video/Data are investigated. The required minimum power levels are derived as PC thresholds and the effects of PC errors on channel quality and radio 1 ink capacity are investigated. The services with high bit rates and low bit error rates can cause a significant effect on the radio link qualifies of the other types of traffic. The results show that the adapt ive step size PC scheme for voice/video/data services can achieve more capacity and cause less interference to the radio channels because less minimum PIL(Power Increment Level) is required for the specified radio link outage probability.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.4
• /
• pp.7-14
• /
• 2005

Recently, images/videos have been preferred as the communication media because of their information-implication and easy recognizability. But the amount of their data is so large that it has been the major research area to compress their data. This paper is related to optimization in the image data format which can make a great effect in performance of data compression and is based on the wavelet transform and JPEG2000. This paper established a criterion to decide the data format to he used in wavelet transform which is on the bases of the data errors in frequency transform and quantization. This criterion has been used to extract the optimal data format experimentally. The result were (1, 9) of 10-bit fixed-point format for filter coefficients and (9, 7) of 16-bit fixed-point data format for wavelet coefficients and their optimality was confirmed.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.283-296
• /
• 2013

Various video services with networks are increasingly available as smart phones, computers and IPTV are widely used. However, transmission over networks may experience transmission errors due to traffic increases and noise. As a result, video quality may suffer. Therefore, quality monitoring emerges as an important issue. In this paper, we propose a video quality assessment method using bit stream information. The video quality metric is calculated using header information and ES (elementary stream) information. To assess performance of the proposed algorithm, subjective quality assessment tests are conducted (VGA resolution). It is shown high correlation between subjective result and the proposed method.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.563-572
• /
• 2002

Wireless mobile networks tend to drop a large portion of packets due to propagation errors rather than congestion. To Improve reliability over noisy wireless channels, wireless networks can employ forward error correction (FEC) techniques. Static FEC algorithms, however, can degrade the performance by poorly matching their overhead to the degree of the underlying channel error, especially when the channel path loss rate fluctuates widely. This paper investigates the benefits of an adaptable FEC mechanism for wireless networks with severe packet loss by analytical analysis or measurements over a real wireless network called sensor network. We show that our adaptive FEC named FECA (FEC-level Adaptation) technique improves the performance by dynamically tuning FEC strength to the current amount of wireless channel loss. We quantify these benefits through a hybrid simulation integrating packet-level simulation with bit-level details and validate that FECA keeps selecting the appropriate FEC-level for a constantly changing wireless channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1165-1171
• /
• 2008

In this paper, a pilot emitting amplify-and-forward relay and its beamforming schemes, OBF (overall beamforming) and RBF (hop-by-hop beamforming), are proposed for two-hop relaying systems. The OBF performs beamforming with respect to a overall channel from a source node (SN) to a destination node (DN) through a relay node (RN), while the proposed RBF performs two independent beamformings: from the SN to the RN and from the RN to the DN. From our analytic and numerical results, it is shown that bit-error-rate (BER) performance of the proposed RBF is better than that of the OBF scheme since the RBF system can estimate channel more proper than the CBF system, which is verified by deriving and comparing the mean square errors of the channel estimation.

• Journal of Navigation and Port Research
• /
• v.41 no.4
• /
• pp.173-180
• /
• 2017

Underwater communications are degraded as a result of inter symbol interference in multipath channels. Therefore, a channel coding scheme is essential for underwater communications. Packets consist of a PN sequence and a data field, and the uncoded PN sequence is used to estimate the frequency and phase offset using a Doppler and phase estimation algorithm. The estimated frequency and phase offset are fed to a coded data field to compensate for the Doppler and phase offset. The PN sequence is generally utilized to acquire the synchronization information, and the bit error rate of an uncoded PN sequence predicts the performance of the coded data field. To ensure few errors, we resort to powerful BCJR decoding algorithms of convolutional codes with rates of 1/2, 2/3, and 3/4. We use this powerful channel coding algorithm to present an efficient receiver structure based on the relation between the bit error of the uncoded PN sequence and coded data field in computer simulations and lake experiments.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.137-148
• /
• 2012

In this paper, we proposed the location-aware coordinate routing algorithm for improving the performance of routing algorithm by using ZigBee in Smart Grid environment. A distributed address allocation scheme used an existing algorithm that has wasted in address space. The x, y and z coordinate axes from divided address space of 16 bit to solve this problems. However, coordinate routing does not take account of wireless link condition. If wiress link condition is not considered, when the routing table is updated, the nodes with bad link conditions are updated in the routing table and can be chosen as the next hop. This brings out the retransmissions because of received packet's errors. Also, because of these retransmissions, additional power is consumed. In this paper, we propose the location-aware coordinate routing algorithm considering wiress link condition, where reliable data transmission is made and the consumed enegy is minimize. and we compared and connected region and transition region of ZigBee location based routing in the aspect of average number of multi hops, subordinate packet delivery ratio, delay time, and energy consumption of proposed algorithm. It turned out that there were improvements in performances of each items.