• Journal of Communications and Networks
• /
• 제8권1호
• /
• pp.38-48
• /
• 2006

A synchronous multicarrier (MC) code-division multiple access (CDMA) system using inverse fast Fourier transform (IFFT) and fast Fourier transform (FFT) for the downlink mobile communication system operating in a frequency selective Rayleigh fading channel is analyzed. Both carrier frequency offset and timing offset are considered in the analysis. Bit error rate performance of the system with both equal gain combining and maximum ratio combining are obtained. The performance is compared to that of the conventional system using correlation receiver. It is shown that when subcarrier number is large, the system using IFFT/FFT has nearly the same performance as the conventional one, while when the sub carrier number is small, the system using IFFT/FFT will suffer slightly worse performance in the presence of carrier frequency offset.

• Journal of Communications and Networks
• /
• 제8권2호
• /
• pp.212-219
• /
• 2006

In this paper, a new turbo codes-based hybrid automatic repeat request (TC-HARQ) scheme with segment selective repeat (SSR) is proposed. The main strategy is, upon retransmission, to repeat the data that are most important for the next round of decoding based on the distribution of residual errors after current decoding. The performance in terms of reliability and throughput is analyzed. To adapt to correlated fading channels where an inter-leaver is always employed before transmission, we further modify the SSR strategy so that data having experienced correlated deep fading are selected for retransmission. Finally, this proposed scheme is applied to the wideband code division multiple access (WCDMA) system under frequency selective fading channels. Simulation results demonstrate that in all single and multiple user cases, SSR-based TC-HARQ leads to significant throughput improvement with similar bit error rate (BER) performance as compared to type-I TC-HARQ.

• 한국통신학회논문지
• /
• 제32권3C호
• /
• pp.195-204
• /
• 2007

The cyclic redundancy check(CRC) code used to decide retransmission request in hybrid automatic repeat request(HRAQ) system can also be used to stop iterative decoding of turbo code if it is used as an error correcting code(ECC) of HARQ system. Thus a scheme to use CRC code for both iteration stop and repeat request in the HARQ system with turbo code based on the standard of cdma 2000 system is proposed in this paper. At first, the optimum CRC code which has the minimum length without performance degradation due to undetected errors is found. And the most appropriate turbo encoder structure is also suggested. As results, it is shown that at least 32-bit CRC code should be used and a turbo code with 3 constituent encoders is considered to be the most appropriate one.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2142-2143
• /
• 2006

Today any data storage system cannot satisfy all of these conditions, however holographic data storage system can perform faster data transfer rate because it is a page oriented memory system using volume hologram in writing and retrieving data. System can be constructed without mechanically actuating part therefore fast data transfer rate and high storage capacity about 1Tb/cm3 can be realized. In this research, to reduce errors of binary data stored in holographic data storage system, a new method for bit error reduction is suggested. Firstly, find fuzzy rule to use test bed system for Element of Holographic Digital Data System. Secondly, make fuzzy rule table using DNA coding method. Finally, reduce prior error element and recording digital data. Recording ratio and reconstruction ratio show good performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.167-169
• /
• 2005

The occurrence of a single bit error in transmission bitstream leads to serious temporal and spatial errors. Because moving picture coding as MPEG-2 based on block coding algorithm uses variable length coding and motion compensation coding algorithm. In this paper, we propose algorithm to conceal occurred error of I-frames in transmission channel using data of the neighboring blocks in decoder. We divide a damaged macroblock of I-frame into four sub blocks and compose new macroblock using the neighboring blocks for each sub block. We estimate the block with minimum difference value through block matching with previous frame for new macroblocks and replace each estimated block with damaged sub block in the same position. Through simulation results, the proposed algorithm will be applied to a characteristic of moving with effect and shows better performance than conventional error concealment algorithms from visual and PSNR of view.

• Journal of the Optical Society of Korea
• /
• 제15권3호
• /
• pp.244-251
• /
• 2011

We propose a new 2-step phase-shifting digital holographic optical encryption technique and analyze tolerance error for this cipher system. 2-step phase-shifting digital holograms are acquired by moving the PZT mirror with phase step of 0 or ${\pi}$/2 in the reference beam path of the Mach-Zehnder type interferometer. Digital hologram with the encrypted information is Fourier transform hologram and is recorded on CCD camera with 256 gray-level quantized intensities. The decryption performance of binary bit data and image data is analyzed by considering error factors. One of the most important errors is quantization error in detecting the digital hologram intensity on CCD. The more the number of quantization error pixels and the variation of gray-level increase, the more the number of error bits increases for decryption. Computer experiments show the results to be carried out encryption and decryption with the proposed method and the graph to analyze the tolerance of the quantization error in the system.

• ETRI Journal
• /
• 제34권1호
• /
• pp.106-109
• /
• 2012

In this letter, we propose a new prediction block filter that can reduce errors between the original and prediction blocks. The proposed filter adaptively adjusts filter coefficients by using the previously reconstructed adjacent blocks and their prediction blocks. Then, the filter is selectively applied to the current prediction block according to the rate-distortion optimization. Moreover, since the same filter coefficients can be derived in the decoder, they are not encoded into the bit-stream. The proposed method achieves a 4.65% bitrate saving on average compared with H.264/AVC.

• 한국군사과학기술학회지
• /
• 제9권4호
• /
• pp.39-49
• /
• 2006

LYNX ESM has not only ESM function but Datalink function. The LYNX boarded equipment Interface and Channel coding is needed for LYNX Datalink to support the mother ship with tactical data included threat radar analysis data of LYNX ESM, navigation data, Radar and Sonar of LYNX. The interface of loaded equipments are various protocol like as ARINC419/429, RS232, Synchro, Sync Serial. The Channel coding of Convolution-Scrambler-Interleaver-Bit Stuffing is applied for recovering the transmission data mixed with propagation errors in sea environment.

• 한국소음진동공학회논문집
• /
• 제18권6호
• /
• pp.612-618
• /
• 2008

Microphone array beamforming method has been recognized as an important aeroacoustic research field and become a standard technique in localizing sound sources. This method also used in flight acoustic measurement, and especially, it is very useful when measure sounds inside the wind tunnel. In measuring sound which is inside the wind tunnel by traditional beamforming method, there are some errors caused by airstream. The speed and the propagation path of the sound changes as it travel through the airstream. This makes the error which the position of sound is changed a little bit to the down stream direction. In this paper, validation test has made about the correction equation for this wind effects of previous researches. And beamforming including shear layer correction was performed about a sound source in the anechoic open-jet wind tunnel.

• 전자공학회논문지A
• /
• 제31A권9호
• /
• pp.64-71
• /
• 1994

In this study, optimizing BPOFs are encoded by Simulated Annealing algorithm that is widely used among the optimization algorithms. Two BPOFs are trained by digit patterns, 0~9, and the digits each having 4 intraclass patterns are multiplexed. When each digit is encoded by four bit binary code, from the results of computer simulation, the correlation pezk is shown at binary value 1 position among the spatially separated four positions at the correlation plane And then, the designed BPOFs are implemented by CGH technique. Through the optical correlation experiment, satisactory results are achieved, inspite of some experimental errors and information loss owing to the amplitude type CGH filter.