• 대한전자공학회논문지
• /
• 제25권1호
• /
• pp.94-100
• /
• 1988

To improve the switching time of active optical bistable devices, we propose an active optical bistable device that consists of a diode laser, a transistor, and a photodetector. By implementing the proposed device we realize the optical bistable device with a 5 nanosecond switching time. This is the fastest switching time among the hybrid type optical bistable devices. It is also experimentally demonstrated that the proposed device may be used in an optical disc pick up.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.538-541
• /
• 2007

In this paper, with a bistable curve of the bistable chiral splay nematic liquid crystal (BCSN LC) device, we clarify how the twist-to-splay transition is achieved under a horizontal field. By a sufficiently high horizontal electric field, the bistable property becomes monostable. The transition can be achieved.

• 대한기계학회논문집B
• /
• 제28권6호
• /
• pp.638-645
• /
• 2004

A new micro actuation concept is introduced and studied in this paper. This idea is based on the thermo-pneumatic actuation principle. In order to improve the performance of a conventional thermo-pneumatic actuator, the idea of bistable buckling is added. By using a membrane which has the bistable buckling characteristics, the working pressure difference can be increased and as a result the work output can be increased. The analysis model for each phenomenon, bistable buckling and phase change, are suggested and the each model is verified with experimental data. From the comparison of the theoretical prediction with the experimental results, it can be concluded that these models are useful for such micro actuator analysis.

• 한국광학회지
• /
• 제8권3호
• /
• pp.218-222
• /
• 1997

빠른 응답 속도와 높은 콘트라스트 비를 갖는 쌍안정 TN(BTN:Bistable Twisted Nematic)셀을 제작하여 전기 광학 특성을 조사하고 쌍안정 특성을 갖기 위한 BTN셀의 동작 조건 및 인가 파형의 특성을 조사하였다. 인가 파형의 reset펄스와 selection펄스의 크기와 폭이 BTN셀의 쌍안정 특성에 미치는 영향과 메모리 시간을 조사하였다. 또한 rubbing강도에 따라 pretilt각을 변화시켜 쌍안정 특성을 보이는 두께와 pitch와의 비의 범위를 구하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.135-138
• /
• 2004

This paper describes the architecture, the basic operation principle and detailed experimental results of digitally programmable high-voltage generators that can be used in monolithic low-power high-voltage bistable LCD drivers. Two different design approaches, depending on whether the application allows the use of external passive components or not, are analyzed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.887-888
• /
• 2013

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.276.1-277
• /
• 2000

Absorptive bistable laser diode was analyzed by using traveling wave model in conjunction with the finite-difference method. Carrier and photon density distributions were calculated and the output characteristics were obtained. The results for both the steady-state and transient (switching) cases were compared with those of the rate equation approach.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 제15회 정기총회 및 동계학술발표회
• /
• pp.142-143
• /
• 2004

• ETRI Journal
• /
• 제28권3호
• /
• pp.389-392
• /
• 2006

In this letter, a laterally-driven bistable electromagnetic microrelay is designed, fabricated, and tested. The proposed microrelay consists of a pair of arch-shaped leaf springs, a shuttle, and a contact bar made from silicon, low temperature oxide (LTO), and gold composite materials. Silicon-on-insulator wafers are used for electrical isolation and releasing of the moving microstructures. The high-aspect-ratio microstructures are fabricated using a deep reactive ion etching (DRIE) process. The tandem-typed leaf springs with a silicon/gold composite layer enhance the mechanical performances while reducing the electrical resistance. A permanent magnet is attached at the bottom of the silicon substrate, resulting in the generation of an external magnetic field in the direction vertical to the surface of the silicon substrate. The leaf springs show bistable characteristics. The resistance of the pair of leaf springs was $7.5\;{\Omega}$, and the contact resistance was $7.7\;{\Omega}$. The relay was operated at ${\pm}0.12\;V$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1173-1176
• /
• 2004

In a previous work we reported the bistable property by doping a chiral material in a splay cell. The bistable states are the splay state and the metastable 180$^{\circ}$twist state. The retention time of the metastable state can be changed by the variation of d/p (cell gap over pitch), cell gap, pretilt angle, azimuthal anchoring force, liquid crystal material, and so on. In this paper we will present uniform bend transition and twist retention time improvement in a multi-domain BCSN LC cell by using the multi cell gap method.