• Biomedical Science Letters
• /
• v.10 no.4
• /
• pp.403-406
• /
• 2004

Environmental endocrine disruptors (EDs) are toxic, hormone-like chemicals which can be found in our normal daily life. We have examined if EDs can inhibit the monocellular microorganisms such as lactic acid bacteria or if the growth of lactic acid bacteria could be resistant to the endocrine disruptors. We have used Lactobacillus paracasei subsp. paracasei (KCTC No. 3165) as an experimental strain and bisphenol A, benzophenone and phenylphenol for the comparison purpose. Experiments included the evaluation of turbidity, absorbance and actual cell counts. We found that No.3165 was somewhat resistant to EDs naturally, however, high concentration of EDs could inhibit the growth of No. 3165 completely. Different EDs showed different spectrum of inhibit. This study should contribute to the development of more resistant lactic acid bacteria to EDs and to the development of functional fermented beverage.

• Macromolecular Research
• /
• v.13 no.3
• /
• pp.223-228
• /
• 2005

In the present work, a low-density polyethylene (LDPE) composite, filled with Zn-ion coated structural silica encapsulated with the diglycidyl ether of bisphenol-A (DGEBA), was synthesized using the conventional melt-blending technique in a sigma internal mixer. The catalytic activity of the Zn-ions (originating from the structural silica) towards the oxirane group (diglycidyl ether of bisphenol-A (DGEBA): encapsulating agent) was assessed by infrared spectroscopy. Two composites, each with a filler content of $2.5 wt\%$ were developed. The first one was obtained by melt blending the Zn-ion coated structural silica with LDPE in a co-rotating sigma internal mixer. The second one was obtained by melt blending the same LDPE, but with DGEBA encapsulated Zn-ion coated structural silica. Epoxy resin encapsulation of the Zn-ion coated structural silica resulted in its having good interfacial adhesion and a homogeneous dispersion in the polymer matrix. Furthermore, the encapsulation of epoxy resin over the Zn-ion coated structural silica showed improvements in both the mechanical and thermal properties, viz. a $33\%$ increase in the elastic modulus and a rise in the onset degradation temperature from 355 to $371^{\circ}C$, in comparison to the Zn-ion coated structural silica.

• Korean Journal of Materials Research
• /
• v.8 no.9
• /
• pp.797-801
• /
• 1998

The cure kinetics for diglycidyl ether of bisphenol A(DGEBA)/4, 4'-methylene dianiline(MDA) system with or without lOphr of phenyl glycidyl ether(PGE)-acetamide(AcAm) was studied by autocatalytic cure expression. On the dynamic DSC curves, the exothermic peak temperature and the onset temperature of reaction decreased with the addition of PGE-AcAm. Regardless of the addition of PGE-AcAm, the shape of the conversion curve showed sigmoid, and this meant that DGEBA/MDA and DGEBA/MDA/PGE-AcAm systems followed autocatalytic cure reaction. When PGE-AcAm was added to DGEBA/MDA system, the cure rate increased about 1.2~1.4 times due to the catalytic role of hydroxyl groups in PGE-AcAm.

• Korean Journal of Materials Research
• /
• v.9 no.5
• /
• pp.467-472
• /
• 1999

The isothermal cure behavior of diglycidyl ether of bisphenol A(DGEBA) 4,4'-methylene dianiline(MDA) system with various contents of neopentyl glycol(NPG) has been analyzed by differential scanning calorimetry(DSC). TO increase the cure rate of DGEBA/MDA system, NPG was introduced as an accelerator. Regardless of the NPG content, the shape of the conversion curves showed sigmoid indication that DGEBA/MDA/NPG system followed autocatalytic cure reaction. The cure reaction of DGEBA/MDA system increased with the increment of NPG content and it was due to the catalytic role of hydroxyl groups of NPG.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2643-2646
• /
• 2009

In this study, a novel phosphorus-containing flame retardant copolymer of spirocyclic pentaerythritol di(phosphate monochloride) and bisphenol S (SPD-BS) was successfully synthesized and used as a flame retardant in diglycidyl ether of bisphenol A (DGEBA) epoxy resins. The chemical structure of the SPD-BS was characterized using FT-IR and $^1H$ NMR spectra. The thermal properties were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The effects of SPD-BS and nano-$CaCO_3$ on the flame-retardant properties of DGEBA/SPD-BS systems were evaluated by measurement of the burning rate. As a result, the thermal stabilities of the DGEBA/SPD-BS systems were decreased with increasing SPD-BS content. The flame-retardant properties and char yields of the systems were significantly increased when SPD-BS content increased. The synergism of nano-$CaCO_3$ incorporation on flame retardancy was found for the DGEBA/SPD-BS systems.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.41-46
• /
• 2013

The glass transition temperature ($T_g$) and conversion (${\alpha}$) were measured for a diglycidyl ether of bisphenol A (DGEBA) epoxy/aromatic amine system incorporated with an organic-inorganic hybrid molecule, polyhedral oligomeric silsesquioxane (POSS). Samples isothermally cured at varying cure temperatures and times were analyzed by differential scanning calorimetry (DSC). $T_g$ vs. ln (time) data at an arbitrary reference were superposed by time-temperature shifts for the kinetically controlled reaction, and the shift factors were used to calculate an Arrhenius activation energy. Influence of POSS was investigated from $T_g$ vs. ${\alpha}$ data, which in turn were fitted with DiBenedetto equation.

• Macromolecular Research
• /
• v.10 no.6
• /
• pp.332-338
• /
• 2002

The effect of an electron beam and ${\gamma}$-ray irradiation on the curing of epoxy resins was investigated. Diglycidyl ether of bisphenol A (DGEBA) and diglycidyl ether of bisphenol F (DGEBF) as epoxy resin were used. The epoxy resins containing 1.0-3.() wt% of triarylsulphonium hexafluoroantimonate(TASHFA) and triarylsulphonium hexafluorophosphate(TASHFP) as initiator were irradiated under nitrogen at room temperature with different dosage of EB and ${\gamma}$-rays from a Co$^{60}$ u source. The chemical and mechanical characteristics of irradiated epoxy resins were compared after curing of EB and ${\gamma}$-ray irradiation. The thermal properties of cured epoxy were investigated using dynamic mechanical thermal analysis. The chemical structures of cured epoxy were characterized using near infrared spectroscopy. Mechanical properties such as flexural strength, modulus were measured. The gel fraction of DGEBA with ${\gamma}$-ray was higher than that of the epoxy with EB at the same dose. Young's modulus of the sample irradiated by ${\gamma}$-ray is higher than that of sample cured by EB. From the result of strain at yield, it was found that the epoxy cured by ${\gamma}$-ray had a higher stiff property compared with the irradiated by EB.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.3
• /
• pp.367-373
• /
• 2014

In this study, we investigated the anticancer activity of methyl gallate (MG), which is the major biologically active component of Galla Rhois, in RC-58T/h/SA#4 human prostate cancer cells. MG inhibited cell proliferation in a dose-dependent manner. Cell death induced by MG increased the population of cells in sub-G1 phase, formation of apoptotic bodies, nuclear condensation, and DNA fragmentation. Apoptosis induced by MG was associated with activation of initiator caspases-8 and -9 as well as effector caspase-3. Endocrine disruptors such as dioxin and bisphenol A increased growth of RC-58T/h/SA#4 cells in charcoal-treated FBS (cFBS) medium. Cell proliferation was highest upon treatment with 1 nM and $0.1{\mu}M$ dioxin and bisphenol A, respectively. MG also dose-dependently inhibited cell proliferation in RC-58T/h/SA#4 cells treated with endocrine disruptors. These results indicate that MG exerts anticancer effects on RC-58T/h/SA#4 primary human prostate cancer cells.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.352-356
• /
• 2014

PDMS modified epoxy resin with epoxy group (EMPDMS) was prepared from the reaction of ${\alpha},{\omega}$-aminopropylpolydimethylsiloxane and diglycidyl ether of bisphenol-A (DGEBA) based epoxy resin, and PDMS modified epoxy hybrid compound (EMPDMSH) was prepared by introducing alkylesteraminopropyl alkoxy silane to EMPDMS. Their structures were characterized using FT-IR, $^1H$-NMR and $^{29}Si$-NMR. Coating materials were prepared by mixing EMPDMSH base and solvent. Physical properties of the coating materials coated on epoxy/glass fiber composite film were measured according to the content of PDMS in EMPDMSH. Contact angle of coating film was increased 30 to 71 degree. Adhesive property of coating film was 5B degree better then epoxy or acrylate coating materials, and surface roughness was decreased as increasing in EMPDMSH.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.258-263
• /
• 2023

In this study, conductive polymers and the enzyme tyrosinase (Tyr) were deposited on the surface of a screen printed carbon electrode (SPCE), which can be fabricated as a disposable sensor chip, and applied to the detection of bisphenol F (BPF), an endocrine disruptor with proven links to male diseases and thyroid disorders, using electrochemical methods. On the surface of the SPCE working electrode, which was negatively charged by oxygen plasma treatment, a positively charged conductive polymer, poly(diallyldimethyl ammonium chloride) (PDDA), a negatively charged polymer compound, poly(sodium 4-styrenesulfonate) (PSS), and another layer of PDDA were layered by electrostatic attraction in the order of PDDA, PSS, and finally PDDA. Then, a layer of Tyr, which was negatively charged due to pH adjustment to 7.0, was added to create a PDDA-PSS-PDDA-Tyr sensor for BPF. When the electrode sensor is exposed to a BPF solution, which is the substrate and target analyte, 4,4'-methylenebis(cyclohexa-3,5-diene-1,2-dione) is generated by an oxidation reaction with the Tyr enzyme on the electrode surface. The reduction process of the product at 0.1 V (vs. Ag/AgCl) generating 4,4'-methylenebis(benzene-1,2-diol) was measured using cyclic and differential pulse voltammetries, resulting in a change in the peak current with respect to the concentration of BPF. In addition, we compared the detection performance of BPF using an ionic liquid electrolyte as an alternative to phosphate-buffered saline, which has been used in many previous sensing studies. Furthermore, the selectivity of bisphenol S, which acts as an interfering substance with a similar structure to BPF, was investigated. Finally, we demonstrated the practical applicability of the sensor by applying it to analyze the concentration of BPF in real samples prepared in the laboratory.