• Journal of Power Electronics
• /
• v.11 no.5
• /
• pp.726-733
• /
• 2011

BLDC Motors are widely used in various speed control applications due to their ease of control and low cost. Generally, the unipolar PWM method is used for speed control applications. However, the unipolar PWM method has a current spike problem in the braking operation which can be a problem in speed reversal which generally happens in position control applications. However, the current spike problem can be solved by the conventional bipolar PWM method. Although the current spike problem can be solved, the conventional bipolar PWM method has the problem of a large current ripple. In this paper, a novel bipolar PWM method is proposed to solve this problem. The current ripple and the current spike problems are analyzed in this paper for the unipolar and bipolar PWM methods. At last, the merits of the proposed bipolar PWM method are proven by experiment.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.7
• /
• pp.491-500
• /
• 2004

This paper considers a hybrid PWM(pulse width modulation) method which can be used in the brushless DC motor controller. Due to many disadvantages of bipolar PWM method, unipolar PWM method is mostly used in industrial field. In constant speed control application, the unipolar PWM method shows the good performance of speed control. But in the wide range of speed control application, it shows poor performance especially when deceleration is needed. So we propose the hybrid PWM method that utilizes both of bipolar and unipolar PWM methods according to the sign of the speed controller output. Simulation and experimental result show that the proposed method improves speed control performance of the brushless DC motor which is applied to the industrial sewing machines.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.121-123
• /
• 2020

본 논문은 단상 3레벨 조건에서 unipolar 및 bipolar PWM의 구현 및 동작에 대해 서술하였으며, 교류전기철도용 전력보상장치의 병렬 운전 상황에서 unipolar PWM과 bipolar PWM에 따른 인터리빙 효과에 대해 비교하였다. 또한, unipolar PWM 조건에서 전력보상장치의 3병렬과 4병렬 시스템의 인터리빙 결과에 대해 비교하였다. 이를 통해 단상 unipolar PWM을 사용한 병렬 시스템의 인터리빙이라는 특수한 조건에서는 PWM 캐리어의 180° phase shift가 포함되는 2병렬 및 4병렬의 경우 마치 bipolar PWM처럼 동작하여 스위칭 리플의 저감효과가 기대한 결과보다 낮음을 확인하였다. 따라서 스위칭 리플의 저감 측면만을 고려한다면 전력보상장치의 병렬 시스템은 180° 캐리어가 포함된 4병렬 시스템보다 120° 캐리어를 사용하는 3병렬 시스템이 유리한 것을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.19-21
• /
• 2004

This paper considers pulse width modulation (PWM) methods which are used in 3-phase brushless DC motor controller. Due to many disadvantages of bipolar PWM method, unipolar PWM method is mostly used in industrial field. In constant speed control application, the unipolar PWM method shows a good performance of speed control. But in the wide range of speed control application, it shows a poor performance especially when deceleration is needed. So we propose hybrid PWM method that utilizes two PWM methods according to the sign of speed controller output. The simulation and experimental result shows that the proposed method improves a speed control performance of the brushless DC motor which is applied to industrial sewing machines.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.310-313
• /
• 2005

In this paper, four quadrant CBPS(Compact Bipolar Power Supply) which development and study using universal PWM controller. The CBPS has 24V DC-link voltage, +/-5A output current, 50kHz switching frequency and 30Hz full load bandwidth using FET device. Proposed system has two independent PWM controllers for each full-bridge switch leg drive and PI control loops for current regulations. It is shown experimental results that good step response of the current output.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.5
• /
• pp.336-344
• /
• 2018

This study proposes a new PWM method for leakage current reduction and neutral point (NP) current control in three-phase three-level converter employed in bipolar DC distribution systems. The proposed PWM method uses medium vectors only when there is no need to control the NP current. Thus, common mode voltages are held constant to realize zero leakage current. Some space vectors that produce low-frequency common mode voltages are employed to minimize leakage currents when the average NP current needs to be a positive or negative value. The proposed space vector PWM is implemented based on barycentric coordinate. The validity of the proposed PWM method is verified by simulations and experiments.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.4
• /
• pp.502-509
• /
• 2013

It presents an efficient switching pattern, which expects a reduction of switching losses in a cascaded H-bridge PWM multilevel inverter. By the proposed switching scheme, the lower H-bridge module operates at low frequency of 60[Hz] because it assigns to transfer most load power. The upper H-bridge module operates at high frequency of PWM switching to improve THD of output voltage. The proposed switching pattern applies to cascaded H-bridge multilevel inverter with PD, APOD, bipolar, and unipolar switching methods. By computer-aided simulations, we verify the validity of the proposed switching scheme. Finally, we prove that the proposed PD and APOD switching patterns are better than those of the conventional one in efficiency.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.267-274
• /
• 2013

This paper presents a design of LLC resonant converter IC for LED backlight unit based on PFM/PWM dual-mode feedback. Dual output LLC resonant architecture with a single inductor is proposed, where the master output is controlled by the PFM and slave output is controlled by the PWM. To regulate the master output PFM is used as feedback to control the frequency of the power switch. On the other hand, PWM feedback is used to control the pulse width of the power switch and to regulate the slave output. This chip is fabricated in 0.35um 2P3M BC(Bipolar-CMOS-DMOS) Process and the die area is $2.3mm{\times}2.2mm$. Current consumptions is 26mA from 5V supply.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.355-362
• /
• 2011

In this paper, we developed the equipment to forming the insulation film which there are operated an electrolysis principles in particular solution. In the earlier, there are supplied the anode by unipolar voltage with pulse, in this paper, there are supplied the anode by bipolar voltage with pulse, alternately. And then, we examinate the system that there are developed the bipolar anodizing equipment using H-bridge. There are modulated pulse width for the variable current. In the results, we obtained the results of the uniform film surface that compared with the unipolar anodizing.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.616-618
• /
• 1996

This paper presents an unipolar PWM which commutated switching device only in a half period. This method reduced switching loss significantly because of decreasing switching number in n period. In high speed motor drive needed high frequency above 300 Hz fundamental frequency, this method is suited very well. This paper described the principle of unipolar PWM method, analyzed harmonic spectrum and compared with bipolar PWM, Modified PWM and Overmodulation method in switching loss.