• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.267-267
• /
• 2000

We developed a human-sized BWR(biped walking robot) driven by a new actuator based on the ball screw which has high strength and high gear ratio. The robot overcomes the limit of the driving torque of conventional BWRs. Each leg of the robot is composed of three pitch joints and one roll joint. In all, a 10 degree-of-freedom robot with two balancing joints was developed. The BWR was developed to walk autonomously such that it is actuated by small torque motors and is boarded with DC battery and controllers. In the performance test, the BWR peformed nice motions of sitting-up and sitting-down. Through the test, we could find capability of high performance in biped-walking.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.373-381
• /
• 2009

In this paper, a humanoid robot is simulated and implemented to walk up a staircase using the blending polynomial and genetic algorithm. Using recently developed kinematics for a biped robot, four schemes for walking up a staircase are newly proposed and simulated separately. For the two schemes of landing a swaying leg on the upper stair, the joint trajectories of seven motors are particularly optimized to generate an energy-minimal motion with the guarantee of walking stability. The proposed scheme of walking upstair is validated by an experiment with a small humanoid robot.

• The Journal of Korea Robotics Society
• /
• v.6 no.4
• /
• pp.301-307
• /
• 2011

Based on the stability criteria of ZMP (Zero Moment Point), this paper proposes an adjusting algorithm that modifies walking trajectory of a bipedal robot for stable walking by analyzing ZMP trajectory of it. In order to maintain walking balance of the bipedal robot, ZMP should be located within a supporting polygon that is determined by the foot supporting area with stability margin. Initially tilting imposed to the trajectory of the upper body is proposed to transfer ZMP of the given walking trajectory into the stable region for the minimum stability. A neural network method is also proposed for the stable walking trajectory of the biped robot. It uses backpropagation learning with angles and angular velocities of all joints with tilting to get the improved walking trajectory. By applying the optimized walking trajectory that is obtained with the neural network model, the ZMP trajectory of the bipedal robot is certainly located within a stable area of the supporting polygon. Experimental results show that the optimally learned trajectory with neural network gives more stability even though the tilting of the pelvic joint has a great role for walking stability.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.107.4-107
• /
• 2002

One of the most important functions of a biped robot is to walk naturally like human. For the human being, toe is very important joint in order to walk naturally. Thus, for a biped robot, the existence of toe joint much affects gait pattern generation and contributes to natural walking, which is similar to the human gait or faster walking like running. Since a conventional biped robot has the feet which consist of soles without toes, it seems difficult to walk naturally. For realizing the gait to be similar to human one, toes are necessary to the biped robot. In this paper, the effect of the toe joint for gait pattern generation is studied. In order to find the effect of toe joint, a biped r...

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.55 no.2
• /
• pp.83-88
• /
• 2006

This paper proposes a method that minimizes the consumed energy by searching the optimal locations of the mass centers of the biped robot's links using Genetic Algorithm. This paper presents a learning controller for repetitive gait control of the biped robot. The learning control scheme consists of a feedforward learning nile and linear feedback control input for stabilization of learning system. The feasibility of learning control to the biped robotic motion is shown via computer simulation and experimental results with 24 DOF biped walking robot.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.249-251
• /
• 2005

For walking patterns of biped robots, knee-bent patterns are used in most cases. However, humans are mostly walking with their knees nearly stretched. In this paper, a human-like walking algorithm using hybrid system is proposed for biped robots, The hybrid system consists of the logically constituted discrete system, in which the discrete states are defined by considering the walking characteristics, and the continuous state system used for motor control. It is shown that the proposed algorithm is effective by experimental studies.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.648-651
• /
• 2004

Biped robot has better mobility than other mobile robot, but it is hard to maintain balance during walking. In order to maintain balance, stability analysis is a key point for a biped robot. The zero moment point analysis has been used most in stability analysis. In this paper, we propose different method of stability analysis using wrench system. It is possible to generate a wrench system by applying a force along an axis in space and simultaneously applying a moment about the same axis. Wrench system is equivalent to a force and moment applied along the same axis. We compare the result of wrench system analysis with that of zero moment analysis in biped robot stability using simulation program.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2438-2440
• /
• 2004

This study is concerned with development of 3-Dimensional simulator of a biped robot that has a prismatic balancing weight or a revolute balancing weight. The dynamic stability equation of a biped robot which have a prismatic balancing weight is conditional linear but a walking robot's stability equation with a revolute balancing weight is nonlinear. To get a stable gait of a biped robot, stabilization equations with ZMP (Zero Moment Point) are modeled as non-homogeneous second order differential equations for each balancing weight type. A trajectory of balancing weight can be directly calculated with the FDM (Finite Difference Method) solution of the linearized differential equation. In this paper, the 3-Dimensional graphic simulator is programmed to get and calculate the desired ZMP and the actual ZMP. Walking of 4 steps was simulated and verified. This balancing system will be applied to a biped humanoid robot, which consist Begs and upper body, at future work.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.55-62
• /
• 2010

In this paper, the structure of a new gravity compensator was studied, and the biped walking robot applying a gravity compensator was presented to improve the performance of the robot. The robot had 13 degree of freedom and is driven by the joint actuator with the gravity compensator. Each leg of the robot is composed of six joints three joints at the hip, a joint at the knee, and two joints at the ankle. The leg of the robot was designed to support 74kg weight including 30kg payload thanks to the gravity compensator. The performance of the robot was presented by reducing the payload applied to the leg joint of the robot thanks to the gravity compensator.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.805-809
• /
• 2003

We developed a human-sized BWR(biped walking robot) named KUBIR1 driven by a new actuator based on the ball screw which has high strength and high gear ratio. KUBIR1 was developed to walk autonomously such that it is actuated by small torque motors and is boarded with DC battery and controllers. To utilize the information on the human walking motion and to analyze the walking mode of robot, a motion capture system was developed. The system is composed of the mechanical and electronic devices to obtain the joint angle data. By using the obtained data, a 3-D graphic interface was developed based on the OpenGL tool. Through the graphic interface, the control input of KUBIR1 is performed.