• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.519-526
• /
• 2016

Biomass derived jet fuel is proven as a potential alternative for the currently used fossil oriented energy. The efficient production of jet fuel precursor with special molecular structure is prerequisite in producing biomass derived jet fuel. We synthesized a new jet fuel precursor containing branched $C_{15}$ framework by aldol condensation of furfural (FA) and ethyl levulinate (EL), where the latter of two could be easily produced from lignocellulose by acid catalyzed processes. The highest yield of 56% for target jet fuel precursor could be obtained at the optimal reaction condition (molar ratio of FA/EL of 2, 323 K, 50 min) by using KOH as catalyst. The chemical structure of $C_{15}$ precursor was specified as (3E, 5E)-6-(furan-2-yl)-3-(furan-2-ylmethylene)-4-oxohex-5-enoic acid ($F_2E$). For stabilization, this yellowish solid precursor was hydrogenated at low temperature to obtain C=C bonds saturated product, and the chemical structure was proposed as 4-oxo-6-(tetrahydrofuran-2-yl)-3-(tetrahydrofuran-2-yl)-methyl hexanoic acid ($H-F_2E$). The successful synthesis of the new jet fuel precursors showed the significance that branched jet fuel could be potentially produced from biomass derived FA and EL via fewer steps.

• Applied Chemistry for Engineering
• /
• v.23 no.5
• /
• pp.456-461
• /
• 2012

To verify the utilization of biomass as energy, the combustion characteristic has been studied by an experimental combustion furnace under an isothermal and non-isothermal combustion. The wood pellet, rice straw and rice husk were used as biomass samples in this work. The characteristics of emission gases, dusts and residues from biomass combustion have been analyzed and compared with those of reuse derived fuel (RDF). From isothermal combustion experiments, it was found that the incomplete combustion of rice straw was greater that that of rice husk, wood pellet and RDF. This is due to the fact that the combustion reaction rate of the rice straw was faster than that of other samples, and the oxygen concentration in rice straw combustion was rapidly decreasing. It was also found that $NO_{X}$ concentration of emission gas from wood pellet combustion was the lowest. From non-isothermal combustion experiments, it was found that all samples were burned before $900^{\circ}C$. Also, the temperature range of $NO_{X}$ emission was similar to that of CO emission, on the other hand, $SO_{2}$ was emitted at a higher temperature than that of CO emission.

• Microbiology and Biotechnology Letters
• /
• v.18 no.1
• /
• pp.6-11
• /
• 1990

Hydrogen evolution from biomass-derived carbohydrates by some Clostridia and optimal culture conditions for hydrogen evolution were investigated. Among the organisms tested, Clostridium butyricum was efficient hydrogen producer with starch, xylan, pectin, cellobiose and xylose. In batch fermentation of Cl. butyricum, optimal conditions for hydrogen evolution were achieved at pH 7.0-8.5, 10-50 mM phosphate, and 2% (w/v) glucose. Total amount of molecular hydrogen evolved by the organism slightly increased at the presence of acetate (<150 mM) or butyrate (<20 mM) in the initial fermentation medium. Especially, in case of more than the above concentration of butyrate, growth and hydrogen evolution were dramatically inhibited. In the conditions were described here, 70 mmole of molecular hydrogen per mg of DCW was produced with 1%(w/v) glucose by the organism.

• Applied Chemistry for Engineering
• /
• v.30 no.3
• /
• pp.280-289
• /
• 2019

5-hydroxymethylfurfural (HMF) and its derivatives, 2,5-furandicarboxylic acid (FDCA) or 2,5-diformylfuran (DFF), are regarded as the "sleeping giants" owing to their wide range of applications and a good alternative source for the production of significant chemicals in almost all kind of industries. This mini-review briefly covers the aspects related to the syntheses, transformation, and applications for the biomass-derived platform chemicals from past to most recent. Many scientific efforts have continuously been made to find out the environmental benign applicable ways in order to achieve the full advantage of these renewable materials because of not only to protect the globe but also shield the future of new generations. One of the best solutions could be the development and utilization of platform chemicals from the natural biomass.

• The monthly packaging world
• /
• s.193
• /
• pp.86-91
• /
• 2009

• Journal of Microbiology and Biotechnology
• /
• v.9 no.5
• /
• pp.554-561
• /
• 1999

A novel estimation method was investigated for determining the concentrations of residual biomass, poly-3-hydroxybutyrate (PHB), and main nutrients including carbon and nitrogen sources, phosphate, and mineral ions from the supplied amount of ammonia solution used for a pH-control solution and nitrogen source in a PHB fermentation. The estimation equations for a batch culture and a fed-batch culture were derived from the relationship between the growth rate of residual biomass and the feed rate of the pH-control solution, and then were applied to the batch culture and the fed-batch cultures of Alcaligenes latus. This method was successfully applied to estimate the concentrations of residual biomass, PHB, and nutrients.

• Korean Journal of Ecology and Environment
• /
• v.55 no.4
• /
• pp.415-420
• /
• 2022

It is essential that continual assessments of the impact of mine-derived water as a long-lasting burden on freshwater environments. Abundance-based evaluations of benthic macroinvertebrates have been conducted to evaluate anthropogenic disturbances and devise policies to reduce their impact. In this study, the status of a stream habitat was evaluated based on the body length and biomass weight of benthic macroinvertebrates of the family Baetidae. Following the renewal of the mining water treatment plant, the abundance of Baetidae assemblages recovered to a level comparable to that of a reference site. However, relatively low values were found for both body length and biomass weight in Baetidae species inhabiting the reddened streambed area, suggesting that the habitat has not yet been completely recovered despite the recovery of the abundance of the Baetidae assemblages. Therefore, continuous investigation and evaluation of this disturbed stream are necessary until their growth conditions of the habitat have functionally recovered.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.2
• /
• pp.54-61
• /
• 2012

In this study, the adsorption of $Cu^{2+}$ from aqueous solution by the biochar derived from woody biomass at different pyrolysis temperatures has been investigated. The woody biomass wastes used in this study were branch of willow ($Salix$ $koreensis$ $Andersson$) and bark of chestnut ($Castanea$ $crenata$ $var.$ $dulcis$). Three biochar samples prepared by heating each biomass at temperature of $300^{\circ}C$, $500^{\circ}C$, and $700^{\circ}C$were tested for the adsorption capacity of Cu. Also the physicochemical properties of the developed biochars were studied using different characterization techniques such as FT-IR, SEM, BET surface area, and cation exchange capacity (CEC). The adsorption of Cu could be well described by Langmuir model for both willow and chestnut biochars with $R^2{\geq}0.98$. The maximum adsorption capacities of the biochar produced at $700^{\circ}C$ from the Langmuir equation were found to be 12.5 mg $g^{-1}$ and 16.9 mg $g^{-1}$ for willow and chestnut, respectively. Chestnut biochar was found to interact more effectively with the active sites available for Cu, resulting higher removal of Cu(II) than wiloow biochar. Ion exchange and surface complexation found to be the main mechanisms involved in the adsorption process. This study demonstrated the feasibility of the biochars derived from woody biomass to be as a low-cost potential adsorbent for heavy metals as Cu(II) removal in aquatic system.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2007

This study was reviewed on the bioethanol production from biomass resources and feedstock supply in America. U.S. Department of Energy (USDE) and the u.s. Department of Agriculture USDA) are both strongly committed to expand the role of biomass as an energy source. They support biomass fuels and products as a way to reduce the need for oil and gas imports, to strengthen the nation's energy security and environmental quality. And it was envisioned a 20 percent replacement of the current U.S.transportation fuel consumption in 2030. Also it was reviewed policies to encourage the expanding of Bio-based fuel use to replace gasoline, such as Clean Air Act, Federal Clean Fuel Program and American Jobs Creation Act. In feedstock supply it was assumed forest biomass will be supplied in 368 million dry tons yearly and the agriculture derived biomass adopted by new technologies and land use change will be supplied in 998 million dry tons, including highly 818 million dry tons of lignocellulosic biomass such as perenial crops (hybrid trees, grasses) corn stover, other crop residues. This amount is 5 times to the amount from based current agricultural technology and crop land.

• Clean Technology
• /
• v.17 no.4
• /
• pp.336-345
• /
• 2011

The total area of forest land in Korea is 64.2%, and significant forest resources can continuously be produced. However our country didn't separate the recyclable waste wood and was illegal landfill or incinerated. In this study, waste-wood and rice husk of biomass and low-grade-anthracite made refuse derived fuel by mixing and compressing. In addition, the binding effect of binders and additives were analyzed. Physical and chemical characteristics of manufactured refuse derived fuel were analyzed and evaluated suitability by compared with quality standards. A result of change with compressed and relaxed density, added 20% anthracite and 10% rice husk is optimal density change and average density increased large range when 20 wt.% P.V.A., guargum, molasses and 10 wt.% starch were added. All fuel samples be distributed over 3,500 kcal/kg LHV and grade of No. 3~4 fuels appeared. A result of the characteristics of physical and chemical compressed biomass refuse derived fuel with addictive, 12.9% of durability improvement appeared when is mixing asphalt and 5.8% of durability improvement appeared when is mixing rice bran by pretreatment of NaOH 5%.