• Journal of Microbiology and Biotechnology
• /
• v.22 no.7
• /
• pp.967-974
• /
• 2012

Cultivation of Spirulina platensis using ammonium salts or wastewater containing ammonium as alternative nitrogen sources is considered as a commercial way to reduce the production cost. In this research, by analyzing the relationship between biomass production and ammonium-N consumption in the fed-batch culture of Spirulina platensis using ammonium bicarbonate as a nitrogen nutrient source, an online adaptive control strategy based on optical density (OD) measurements for controlling ammonium feeding was presented. The ammonium concentration was successfully controlled between the cell growth inhibitory and limiting concentrations using this OD-based feedback feeding method. As a result, the maximum biomass concentration (2.98 g/l), productivity (0.237 g/l d), nitrogen-to-cell conversion factor (7.32 gX/gN), and contents of protein (64.1%) and chlorophyll (13.4mg/g) obtained by using the OD-based feedback feeding method were higher than those using the constant and variable feeding methods. The OD-based feedback feeding method could be recognized as an applicable way to control ammonium feeding and a benefit for Spirulina platensis cultivations.

• Korean Journal of Ecology and Environment
• /
• v.52 no.2
• /
• pp.81-93
• /
• 2019

Phytoplankton is one of the important primary producers providing organic matter through photosynthesis in aquatic environments. In order to determine a temporal and spatial variation in primary productivity after weir construction in the Nakdong River, we investigated carbon uptake rates using in-situ $^{13}C$ labeling experiments and identified algal communities contributing to primary productivity using HPLC-CHEMTAX analysis from October to December, 2017. The primary productivity gradually decreased from fall to early winter season ($249{\sim}933mgC\;m^{-2}d^{-1}$ in October, $64{\sim}536mgC\;m^{-2}d^{-1}$ in November and $60{\sim}274mgC\;m^{-2}d^{-1}$ in December, respectively). This is attributed to the temporally declining light intensity and the decreasing biomass and physiological activity of phytoplankton in winter. The contribution of diatoms to the phytoplankton community in the Nakdong River was approximately 63% at all the sampling sites and seasons, while the contribution of cryptophytes increased from 9% in October to 32% in November and December. The temporal changes in the primary productivity and the dominant phytoplankton species in the mid and downstream weirs of the Nakdong River was investigated for the first time, after construction of the weirs, and major environmental factors controlling the temporal variation in primary productivity and phytoplankton communities were identified in this study. We suggest that seasonal field investigations will provide further information on the major environmental factors which affect the annual variation of primary productivity and phytoplankton communities.

• KSBB Journal
• /
• v.19 no.6 s.89
• /
• pp.457-461
• /
• 2004

DO-stat fed-batch cultures of Agaricus blazei were carried out using various feeding solutions, for the production of mycelial biomass and exopolysaccharides (EPS). It was observed to be more effective to use a feeding solution containing both carbon and nitrogen sources than that containing only carbon source. The best result was obtained when a feeding solution containing 450 g/l glucose, 60 g/l yeast extract, 30 g/l soytone peptone was used. The maxium mycelial biomass and EPS concentrations were 36.5 g/l and 10.9 g/l, respectively, at 100 hours of cultivation. The mycelial and EPS productivities were 0.37 g/l-h and 0.11 g/l-h, respectively. As compared with the batch culture, the mycelial biomass concentration and its productivity were 6.0- and 2.2-folds increased, respectively. The EPS concentration and its productivity were increased by 4.7 times and 1.8 times, respectively.

• Korean Journal of Environmental Biology
• /
• v.31 no.4
• /
• pp.288-294
• /
• 2013

Recently, sustainable production of biofuel using algal biomass is being pursued because of its enormous potential. First and foremost, securing superior strains to develop an efficient production system for algal biodiesel through screening or genetic improvement of microalgae is necessary. The genus of Botryococcus is regarded as one of the superior microalgae for biodiesel production due to its ability to accumulate high amounts of lipids and hydrocarbons. However, its low growth rate is a bottleneck for large-scale production and commercialization. The purpose of this study is to obtain indigenous Botryococcus strains which possess high lipid content and biomass productivity. The Botryococcus sp. was isolated from the Seobu Reservoir in Jeju Island and identified as Botryococcus sudeticus J2 by comparative analysis of 18s rRNA gene and ITS regions. The biomass productivity and lipid content of B. sudeticus J2 were 0.116 g $L^{-1}day^{-1}$ and 40.1% of dry wt., respectively. This was higher than the value of B. braunii UTEX 572, which is widely regarded as a superior strain among Botryococcus species. The relatively high growth rate of B. sudeticus J2 was achieved under a light intensity of 240 ${\mu}mol$ photons $m^{-2}s^{-1}$ with ambient air spargingwhen compared to 120 ${\mu}mol$ photons $m^{-2}s^{-1}$ with 2% $CO_2$ supply. In summary, it is likely that the isolated B. sudeticus J2 can be used for the mass cultivation and biodiesel production.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.318-326
• /
• 2014

This study was conducted to investigate the potential of non-used forest biomass residues as raw materials for making wood pellets with additives such as wood tar and starch and to evaluate fuel characteristics of the pellets. Wood tar, a by-product provided from the carbonization process of wood, could be a suitable additive for wood pellet production due to its higher calorific value and lower hazardous heavy metals, such as cadmium and mercury, compared to woody biomass. When the wood tar (10 wt%) was added, the calorific value was increased from 4,630 kcal/kg (wood pellet without additive) to 4,800 kcal/kg (wood pellet with additive). With the increase of additive amount into wood pellet, the length and individual density of wood pellet increased. In addition, bulk density of the pellets was increased, whereas the fine content was decreased. Consequently the overall productivity of wood pellets was improved by adding 2 w% additives into wood pellets; the percentage of productivity increase was 5.9% and 4.9% for adding starch and wood tar, respectively.

• Korean Journal of Ecology and Environment
• /
• v.40 no.3
• /
• pp.419-430
• /
• 2007

Physiochemical factors, phytoplankton biomass (Chl ${\alpha}$) and primary productivity were investigated seasonally in the three lakes of Dongbok, Juam, and Yeongsan during April 2004${\sim}$March 2006. Microphytoplankton dominated (>60%) in Dongbok lake, and phytoplankton biomass was high in the upper area, especially during April 2004, whereas they were high in the lower area during June 2004. In Juam lake, the high phytoplankton biomass in April 2004 was contributed by nanophytoplankton. In Yeongsan lake, chlorophyll a was high in August with high contribution of nanophytoplankton. Primary production was highest in Dongbok lake, and then followed by Yeongsan and Juam lakes. Regression analysis in Dongbok take showed that Chl ${\alpha}$ and primary production had close relations with secchi depth. In Juam lake, phosphate were correlated with the Chl ${\alpha}$, while temperature and TN was correlated with primary production in the lower area. In Yeongsan lake, Chl ${\alpha}$ have positively correlation with TN/TP. Primary production in the upper have high relationship with secchi depth, however, in the lower have high relationship with turbidity. Linear regression analysis showed that nutrients of nitrogen and phosphorus should be reduced for the protections in Juam and Dongbok lakes. We suggested that suspended solids and phytoplankton growth related to turbidity are needed to manage in Yeongsan lake.

• Journal of Environmental Science International
• /
• v.23 no.9
• /
• pp.1563-1572
• /
• 2014

The autecology of the Zostera marina and Z. japonica was studied in populations growing in the same locality (Sagumi Bay, southwestern coast of Korea). Environmental factors and plant characteristics were examined monthly from August 2008 to September 2011. Along intertidal zone, Z. japonica (0.1-0.5 m above mean lower low water, MLLW) occurred above Z. marina (0.5-2.5 m MLLW). Tidal exposure at low tide during day was the highest in the spring and the lowest in the summer. Underwater Irradiance showed seasonal fluctuation that was the highest in spring and summer caused by tidal pattern. Strong seasonal patterns in water temperature appeared to control the seasonal variations in morphology, biomass and leaf growth. The seasonal pattern of Z. japonica resembled that of the Z. marina in morphological characteristics, above-and below-ground biomass, whereas it differed in shoot density and leaf elongation. Despite some similarities in seasonal growth patterns, the patterns of Z. japonica were lagged by 2 month of Z. marina. Seasonal variation in the above biomass of Z. marina was caused by changes in density and plant size, whereas that of Z. japonica was mainly caused by changes in shoot density. Zostera marina was more sensitive to high temperatures than Z. japonica, and the increasing water temperature during the summer became the factor that inhibits the growth of the Z. marina. Zostera Japonica, there is no clear change according to the amount of the light. It is because its habitat locates above that of Zostera marina so that the amount of the light that is necessary to growth is enough and in this condition, any preventing factor does not seem to work at all. Although underwater light getting into Zostera marina's habitat is very low level and there is no any hindrance to the survival of them, it prevents them from their productivity a bit.

• Microbiology and Biotechnology Letters
• /
• v.6 no.4
• /
• pp.155-159
• /
• 1978

Phenol utilizing yeast No. 558 isolated from soil sewage sediment was able to use substantial amount of phenol as the sole carbon source, and the biomass productivity by this organism was very excellent. This organism could grow well in 1000 ppm of phenol concentration, the maxim-um specific growth rate obtainable at pH 5.0, 3$0^{\circ}C$ was 0.27/hr., and the biomass yield coefficient Y vs. consumed phenol was 3.2. Maximum production rate of biomass was observed at 35$^{\circ}C$, pH 3.5 to pH 4.5, and the addition of the 0.005~0. 01% yeast extract was the most effective. Addition of HgCl$_2$ and phenyl hydrazine, inhibitors of oxide-reductase, in the phenol containing cultural liquid caused this organism no-growth at the concentration of 10$^{-5}$ M, 10$^{-3}$ M respectively. This organism could utilize not only phenol but catechol, resorcinol and benzidine.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.8
• /
• pp.1235-1243
• /
• 2020

The use of microalgal biomass as feedstock for biofuels has been discussed for decades as it provides a sustainable approach to producing fuels for the future. Nonetheless, its feasibility has not been established yet and various aspects of biomass applications such as CO₂ biofixation should also be explored. Therefore, in this study, the CO₂ biofixation and lipid/carbohydrate production potential of Chlorella sp. ABC-001 were examined under various nitrogen concentrations. The highest biomass productivity and CO₂ biofixation rate of 0.422 g/l/d and 0.683 g/l/d, respectively, were achieved under a nitrogen-rich condition (15 mM nitrate). Carbohydrate content was generally proportional to initial nitrate concentration and showed the highest value of 41.5% with 15 mM. However, lipid content showed an inverse relationship with nitrogen supplementation and showed the highest value of 47.4% with 2.5 mM. In consideration as feedstock for biofuels (bioethanol, biodiesel, and biogas), the sum of carbohydrate and lipid contents were examined and the highest value of 79.6% was achieved under low nitrogen condition (2.5 mM). For lipid-based biofuel production, low nitrogen supplementation should be pursued. However, considering the lower feasibility of biodiesel, pursuing CO₂ biofixation and the production of carbohydrate-based fuels under nitrogen-rich condition might be more rational. Thus, nitrogen status as a cultivation strategy must be optimized according to the objective, and this was confirmed with the promising alga Chlorella sp. ABC-001.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.2
• /
• pp.137-142
• /
• 2013

The indiscriminate use of the fossil fuel has caused serious environmental pollutions such as the shortage of energy and global warming. Microalgae have being emphasized as $3^{rd}$ generation biomass which makes the carbon dioxide reduce effectively as well as produces the biofuel. Large scale production of microbial biomass by continuous culture is a quite challenging issue, because off-line optimization strategies of a microbial process utilizing a model-based scheme give rise to many difficult problems. In this paper, the static and simple control method which was able to be applied in time-variant growth environment and large scale of algae culture was studied. The significant disturbances in on-line measurement of cell density were reduced by Savitzky-Golay FIR smoothing filter. Dunaliella salina was cultivated continuously in a flat panel photobioreactor by the on-off control of the turbidostat process.