• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.129-132
• /
• 2013

The low rank coal combustion and biomass-coal co-firing characteristics were reviewed on this study for the power plant construction. The importance of using low rank coal(LRC) for power plant is increasing gradually due to power generation economy and biomass co-firing is also concentrated as power source because it has carbon neutral characteristics to reduce green-house effect. The combustion characteristics of low rank coal and biomass for a 310MW coal firing power plant and a 100MW biomass and coal co-firing power plant were studied to apply into actual power plant design and optimized the furnace and burner design.

• Journal of Microbiology and Biotechnology
• /
• 제23권4호
• /
• pp.539-544
• /
• 2013

The effects of culture depth (2-10 cm) and cell density on the growth rate and biomass productivity of Chlorella sp. XQ-200419 were investigated through the use of a self-designed open circular pond photobioreactor-imitation system. With increases in culture depths from 2 to 10 cm, the growth rate decreased significantly from 1.08 /d to 0.39 /d. However, the biomass productivity only increased slightly from 8.41 to 11.22 $g/m^2/d$. The biomass productivity (11.08 $g/m^2/d$) achieved in 4 cm culture with an initial $OD_{540}$ of 0.95 was similar to that achieved in 10 cm culture with an initial $OD_{540}$ of 0.5. In addition, the duration of maximal areal productivity at a 4 cm depth was prolonged from 1 to 4 days, a finding that was also similar to that of the culture at a 10 cm depth. In both cases, the initial areal biomass densities were identical. Based on these results and previous studies, it can be concluded that the influence of culture depth and cell density on areal biomass productivity is actually due to different areal biomass densities. Under suitable conditions, there are a range of optimal biomass densities, and areal biomass productivity reaches its maximum when the biomass density is within these optimal ranges. Otherwise, biomass productivity will decrease. Therefore, a key factor for high biomass productivity is to maintain an optimal biomass density.

• 한국연소학회지
• /
• 제19권3호
• /
• pp.8-17
• /
• 2014

The aims of this research were to evaluate effects of biomass co-firing to pulverized coal power plants and the variation of co-firing ratios on the plant efficiency related to power consumption of auxiliary system and flue gas characteristics such as production and component by process simulation based on the existing pulverized coal power plant. In this study, four kinds of biomass are selected as renewable fuel candidates for co-firing: wood pellet(WP), palm kernel shell(PKS), empty fruit bunch(EFB) and walnut shell(WS). Process simulation for various biomass fuels and co-firing ratios was performed using a commercial software. Gas side including combustion system and flue gas treatment system was considering with combination of water and steam side which contains turbines, condenser, feed water heaters and pumps. As a result, walnut shell might be the most suitable as co-firing fuel among four biomass since when 10% of walnut shell was co-fired with 90% of coal on thermal basis, flue gas production and power consumption of auxiliary systems were the smallest than those of other biomass co-firing while net plant efficiency was relatively higher than those of other biomass co-firing. However, with increasing walnut shell co-firing ratios, boiler efficiency and net plant efficiency were expected to decrease rather than coal combustion without biomass co-firing.

• Journal of Ecology and Environment
• /
• 제31권2호
• /
• pp.115-123
• /
• 2008

We describe plant biomass in the grasslands of the Mongolian steppe obtained using a quadrat sampling technique. Four sites were studied in the northeastern Mongolia located between $47^{\circ}12'N$ and $47^{\circ}40'N$ and $102^{\circ}22'E$ and $112^{\circ}24'E$, which were typical grasslands of the steppe. Biomass, carbon and nitrogen content were determined for the plants collected from the grazed and ungarazed stands. With the measurements above, we expect to obtain information on grazing effects on the grasslands and carbon sequestration of the grassland from the air. In order to estimate the biomass without destroying the stands, we derived an equation to describe the relationship between plant biomass and v-value using plant height and species coverage within the stand. Estimated plant biomass in the ungrazed and grazed stands ranged between $108.0\;g\;m^{-2}$ and $13.4\;g\;m^{-2}$ and between $97.5\;g\;m^{-2}$ and $14.1\;g\;m^{-2}$ in late June 2005, respectively. Litter in the ungrazed and grazed stands ranged from $330.3\;g\;m^{-2}$ to $78.4\;g\;m^{-2}$ and from $188.0\;g\;m^{-2}$ to $20.3\;g\;m^{-2}$, similarly. Average carbon and nitrogen contents in plants and in litter were 43.0% and 1.9% and 33.7% and 1.4%, respectively. In study sites at Baganuur, the carbon and nitrogen content of plant materials (plant plus litter) was $118.4\;g\;m^{-2}$ and $4.7\;g\;m^{-2}$ on 30 June 2005.

• KSBB Journal
• /
• 제15권4호
• /
• pp.337-341
• /
• 2000

The decanter is very useful to harvest biomass from plant cell cultures in large-scale process. It is very important to obtain high yield and low moisture content in recovered biomass so as to minimize solvent usage in subsequent extraction steps. Effluent clarity was also affected by the differential speed although this affect was more dramatic at higher flow rates than at lower flow rates. Moisure content was largely unaffected by flow rate. A decrease in moisture content was evident as differential speed decreased.

• 한국연초학회지
• /
• 제15권1호
• /
• pp.75-89
• /
• 1993

Effect of the amount of fertilizer, plant density, and harvesting time on the production of tobacco leaf protein and fresh biomass was investigated. Flue-cured tobacco(M tabacum, L., cv. NC 82) seedlings were transplanted in the field dressed 200kg N per ha at 1$\times$105, 3$\times$105, 5$\times$105, 7$\times$105 plants per ha, and were harvested at the time when 6 and 10 weeks after transplanting, respectively. Harvest at 10 weeks after transplanting increased greatly number of leaves per plant and fresh weight of a plant, Precentage of senescent leaf weight, but significantly decreased fresh weight of a leaf and total protein contents g-1 fresh weight of leaf and stalk over the amount obtained from the harvest at 6 weeks after transplanting. Also, fresh leaf numbers of a plant, fresh weight of a leaf and of a plant, and total protein contents g-1 fresh weight of biomass were more decreased, but percentage of senescent leaf weight were remarkably increased under higher plant density. Therefore, it was seemed that harvesting at 6 weeks after transplanting under 1$\times$105 plant density per ha is more effective for producing higher yield of biomass and protein per plant than 10 weeks harvesting with 7$\times$105 population per ha. A trend was observed that biomass and protein yields per ha are positively correlated with plant population. Biomass yield per ha was the greatest at 7$\times$105 density(80.5t), but the peak of protein yield was at the near of 5$\times$105 population(2454kg as total protein) per ha on the regression curve. It was assumed that if tobacco plants are transplanted under 5$\times$105 plant density at the mid of May, and thereafter harvest at 6 weeks repeatedly during the growing season, it is possible to harvest 2~3 times per year, and to yield more 6.024kg of protein and over 140me1ric tons of fresh biomass ha 1 year 1 statistically in the korea tobacco growing regions.

• The Plant Pathology Journal
• /
• 제18권1호
• /
• pp.30-35
• /
• 2002

The hyphal growth and biocontrol efficacy of Trichodemo harzianum in soil may depend on its interactions with biotic components of the soil environment. The effect of soil microbial biomass on growth and biocontrol efficacy of T. hanianum isolate ThzIDl-M3 (green fluorescent protein transformant) was investigated using artificially prepared different levels of soil microbial biomass (153,328, or 517ug biomass carbon per g of dry soil; BC). The hyphal growth of T. harzanum was significantly inhibited in the soil with 328 or 517 $\mu$g BC compared with 153 ug BC. When ThzIDl-M3 was added to the soils as an alginate pellet formulation, the recoverable population of ThzIDl-M3 varied, but the highest population occurred in 517ug BC. Addition of alginate pellets of ThzIDl-M3 to the soils (10 per 50 g) resulted in increased indigenous microbial populations (total fungi, bacterial fluorescent Pseudomonas app., and actinomycetes). Furthermore, colonizing ability of ThzIDl-M3 on sclerotia of Sclerotinia sclerotiorum was significantly reduced in the soil with high revel of BC. These results suggest that increased soil microbial biomass contributes to increased interactions between introduced T. harzianum and soil microorganisms, consequently reducing the biocontrol efficacy of 1T. harzianum.

• Journal of Plant Biotechnology
• /
• 제48권4호
• /
• pp.278-288
• /
• 2021

The development of bioenergy through biomass has gained importance due to the increasing rates of fossil fuel depletion. Biomass is important to increase the productivity of bioethanol, and production of biomass with high biomass productivity, low lignin content, and high cellulose content is also important in this regard. Inorganic salts are important in the cultivation of biomass crops for the production of biomass with desirable characteristics. In this study, the roles of various inorganic salts in biomass and bioethanol production were investigated using an in vitro tobacco culture system. The inorganic salts evaluated in this study showed dramatic effects on tobacco plant growth. For example, H₂PO₄ substantially improved plant growth and the root/shoot (R/S) ratio. The chemical compositions of tobacco plants grown in media after removal of various inorganic salts also showed significant differences; for example, lignin content was high after Mg²⁺ removal treatment and low after K⁺ treatment and H₂PO₄ removal treatment. On the other hand, NO₃^- and H₂PO₄ treatments yielded the highest cellulose content, while enzymatic hydrolysis yielded the highest glucose concentration ratio 24 h after NH₄⁺ removal treatment. The ethanol productivity after H₂PO₄ removal treatment was 3.95% (w/v) 24 h after fermentation and 3.75% (w/v) after 36 h. These results can be used as the basis for producing high-quality biomass for future bioethanol production.

• Journal of Ecology and Environment
• /
• 제37권4호
• /
• pp.165-175
• /
• 2014

A natural population of Adonis multiflora, a spring ephemeral herb growing in temperate deciduous forests, was studied to determine the seed production characteristics. Plant size, flowering time, and seed number were monitored from February 2009 to May 2011 in main growing season (i.e., from March through May). The biomass rates of the shoot and the root in the A. multiflora population were 22-24% and 76-78%, respectively, and the biomass of the root was proportional to that of the shoot. The flowering rate was 60% in the plants with 1 to 2 g of shoot biomass, and 100% in the plants with >2 g of shoot biomass. In the plants with root biomass between 4 and 6 g, the flowering rate was 43% and, in the plants with the root biomass over 8 g, it was 100%. The shoot biomass was a better predictor of the flower production probability than the root biomass. The number of flowers and seeds was closely correlated to shoot biomass at 1% significance level. The size of the plant that produced seed excessively instead of the shoot biomass in one year typically decreased in the next year and vice versa. The flowering time and its duration were closely related to the number of faithful seeds but not to that of total seeds. The number of faithful seeds was proportionate to flowering duration and inversely proportionate to flowering time (year day, YD). In a plant, the number of faithful seeds noticeably decreased with the inflorescence (i.e., order of flower in a plant), and this difference between the two successive flowers was significant at the 1% level between the first and the third flower in 2009 and 2011 but not between the third and the fourth. However, the number of total seeds was mostly similar in the first through the fourth flower for all three years.

• 한국관개배수논문집
• /
• 제17권2호
• /
• pp.82-94
• /
• 2010

Recently, biomass application for energy is getting more interests from many countries since biomass is widely available over the nation wide, whereas fossil fuels are produced in several limited regions. Recognizing the importance, government is promoting renewable energy use in Korea. The locational characteristics of the existing biomass potential directly can be used to decide scale of power plant for local agricultural facility. Although there are a few studies on feasible biomass potential in local areas, it is expected that both government and commercial sectors recognize the potential of biomass energy and the importance of reducing greenhouse gases. When planning biomass energy systems, biomass price is determined by the costs of collection, transportation, chipping, drying if required. In this paper investigates the economic and spatial characteristic of biomass location by land use map. However typical area of each categories in local region is not correct to agricultural census data. Therefore we concerned about how to calculate feasible biomass potential which it can be describing total amount of plant scale, and to match both of data. Even though its spatial distribution, in rural area in Korea, to expand biomass energy programs in the area, government serve to find areas of higher biomass production with suitable locations for plants to convert to bio-energy in order to increase the usage of renewable energy.