• The monthly packaging world
• /
• s.366
• /
• pp.48-63
• /
• 2023

• Macromolecular Research
• /
• v.17 no.12
• /
• pp.1025-1031
• /
• 2009

Several kinds of biodegradable hydrogels were prepared via in situ photopolymerization of Pluronic F127/poly($\varepsilon$-caprolactone) macromer and acrylic acid (AA) comonomer in aqueous medium. The swelling kinetics measurements showed that the resultant hydrogels exhibited both thermo- and pH-sensitive behaviors, and that this stimuli-responsiveness underwent a fast reversible process. With increasing pH of the local buffer solutions, the pH sensitivity of the hydrogels was increased, while the temperature sensitivity was decreased. In vitro hydrolytic degradation in the buffer solution (pH 7.4, $37^{\circ}C$), the degradation rate of the hydrogels was greatly improved due to the introduction of the AA comonomer. The in vitro release profiles of bovine serum albumin (BSA) in-situ embedded into the hydrogels were also investigated: the release mechanism of BSA based on the Peppas equation was followed Case II diffusion. Such biodegradable dual-sensitive hydrogel materials may have more advantages as a potentially interesting platform for smart drug delivery carriers and tissue engineering scaffolds.

• Composites Research
• /
• v.22 no.4
• /
• pp.41-49
• /
• 2009

Natural fiber reinforced composites are emerging as low-cost, lightweight, recyclable, and eco-friendly materials. These are biodegradable and non-abrasive. Due to eco-friendly and biodegradable characteristics of natural fibers, they are being considered as potential candidates to replace the conventional fibers. The chemical, mechanical, and physical properties of natural fibers have distinct features depending upon the cellulose content of the fibers which varies from fiber to fiber. The mechanical properties of composites are influenced mainly by the adhesion between matrix and fibers. Several chemical and physical modification methods of fiber surface were incorporated to improve the tiber-matrix adhesion resulting in the enhancement of mechanical properties of the composites. This paper outlines the works reported on natural tiber reinforced composites with special reference to the type of fibers, polymer matrix, processing techniques, treatment of fibers, and fiber-matrix interface.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.203-204
• /
• 2006

Studies on some biodegradable polymers and other materials such as hydrogels have shown the promising potential for a variety of surgical applications. Postoperative adhesion caused by the natural consequence of surgical wound healing results in problems of the repeated surgery. Recently, scientists have developed absorbable anti-adhesion barriers that can protect a tissue from adhesion in case they are in use; however, they are dissolved when no longer needed. Although these approaches have been attempted to fulfill the criteria for adhesion prevention, none can perfectly prevent adhesions in all situations. Overall of this work, a new method to fabricate an anti-adhesion membrane using biodegradable polymer and hydrogel has been developed. The ideal barrier for preventing postoperative adhesion would have the following properties; it should be (i) resorbable (ii) non-reactive (iii) easy to apply (iv) capable of being fixed in position. In order to fulfill these properties, we adopted solid freeform fabrication method combined with surface modification which includes the hydrogel coating, therefore, inner or outer structure can be controlled and the property of anti adhesion can be improved.

• KSBB Journal
• /
• v.18 no.2
• /
• pp.107-110
• /
• 2003

Biodegradable polymers, poly(lactic-co-glycolic acid) (PLGA), poly(3-hydroxybutyrate) (PHB), and medium chain length polyhydroxyalkanoates (MCL-PHA) containing rose bengal (model drug) were coated onto the surface of stainless steel (stent materials) and their in vitro release characteristics were investigated. Drug release increased with; decreasing PLGA concentration, increasing rose bengal concentration, and Increasing dip-coating duration. The order of drug release from the polymer coating was: PHB > PLGA > MCL-PHA. These results suggest that drug release can be controlled by: changing the concentration and type of polymer, the drug concentration, and the dip-coating duration.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2006

The development of functional polymeric materials for biomedical application has progressed on the basis of functionality, biocompatibility and biodegradability. In this paper we review the functional polymeric biomaterialsbased systems and propose a range of biomedical applications in the near future. These systems include the functional biodegradable polymers synthesized in our research laboratory, biodegradable polymeric materials, thermosensitive polymeric materials, cationic polymeric materials, non-condensing polymeric biomaterials, bio-polymeric DNA matrix for tissue engineering, and polymeric biomaterials for RNA interference (RNAi) technology.

• Korean Journal of Materials Research
• /
• v.16 no.1
• /
• pp.1-4
• /
• 2006

Biodegradable $\beta$-tricalcium phosphate ( $\beta$-TCP)/poly(lactide-co-glycolide) (PLGA) composites were synthesized by in-situ polymerization with microwave energy. The influence of the $\beta$-TCP content in $\beta$-TCP/PLGA composites on the molecular weight, crystallinity, microstructure and mechanical properties was investigated. As the molecular weight of composites decreased, the $\beta$-TCP content increased up to 10 wt.%, while the excess addition of the $\beta$-TCP content above 10 wt.% the molecular weight increased with increasing of the $\beta$-TCP content. This behavior would be due to the superheating effect or nonthermal effect induced by microwave energy. It was found that the bending strength and Young's modulus of the $\beta$-TCP/PLGA composites was proportional to the molecular weight of PLGA. The bending strength of the $\beta$-TCP/PLGA composites ranged from 18 to 38 MPa, while Young's modulus was in the range from 2 to 6 GPa.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.1
• /
• pp.1-11
• /
• 2017

Fishing pots are one of the important fishing gears in our coastal and offshore fisheries. In terms of a sustainable use of marine resources, there are concerns about the ghost fishing by lost pots. It is reported that 10 to 70% of the pots are abandoned or lost annually. This study is to compare the catching efficiency of drum type whelk pots that are made of biodegradable nets to those made of the ordinary nets, in the eastern coast of Korea. Five types of drum pots were used with combination of biodegradable nets and ordinary (PA, PE) nets applied to the main and funnel parts of the pots: pots with biodegradable nets (Bio+Bio); pots with PE net (PE+PE); pots with body and funnel made of biodegradable nets and PE nets respectively (Bio+PE); pots with body and funnel made of PE nets and PA nets respectively (PE+PA); pots with body and funnel made of PE nets and biodegradable net respectively (PE+Bio). Field experiments were conducted from June $18^{th}$, 2015 to August $7^{th}$, 2015 using a commercial fishing vessel in the Uljin waters on the eastern coast of Korea. Two fleets of pots with one hundred in each, 20 pots of each type, were casted for 8 to 15 days to analyze their catching efficiency. The catch of target species, whelks, was 202,563.0 g with catch rate of 38.7% of the total catch, while the bycatch was 320,709.7 g with the rate of 61.3% of the total catch. The catch of whelks was the highest in the Bio+PE pots (46,020.3 g), followed by the Bio+Bio pots (42,027.5 g), the PE+Bio pots (41,849.9 g) and the lowest being PE+PE pots (38,054.2 g). Compared to the conventional pots, the pots with biodegradable nets on the body or entrance part had slightly higher catch rate for both the target species and the bycatch. The PE+PE had the lowest catch rate. There is no significant difference in catch between the pots with biodegradable nets and the ordinary nets for the target species such as Buccinum opisthoplectum, Neptunea eulimata, Buccinum striatissimum. Consequently, using biodegradable nets for the conventional whelk pots can reduce ghost fishing by lost gears while keeping the performance of the pots.

• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.871-879
• /
• 2007

Purpose: The purpose of this study was to evaluate the bone regeneration of novel biodegradable amorphous calcium phosphate. Materials and Method: An 8-mm, calvarial, critical-size osteotomy defect was created in each of 20 male Sprague-Dawley rats(weight $250{\sim}300g$). The animals were divided into two groups of 10 animals each and allowed to heal for 2 weeks(10 rats). The first group was the control group and the other group was the experimental group which received the novel biodegradable calcium phosphate. Results: The healing of the calvarium in the control group was uneventful. The histologic results showed little bone formation in the control group. The experimental group which received the novel biodegradable calcium phosphate showed a normal wound healing. There were a lot of new bone formation around the biomaterial in 2 weeks. The bone formation increased in 8 weeks when compared to 2 weeks and there was a significant bone increase as well(P<0.01). The nobel biodegradable calcium phosphate showed statistical significance when compared to the control group (P<0.05). The novel biodegradable calcium phosphate in 8 weeks showed a significant increase in bone formation when compared to 2 weeks $(40.4{\pm}1.6)$(%). The biodegradable calcium phosphate which is made from mixing calcium phosphate glass(CPG), NaCO and NaOH solution, is biocompatible, osteoconductive and has a high potency of bone formation. Conclusion: We can conclude that the novel biodegradable calcium phosphate can be used as an efficient bone graft material for its biodegradability and osteoconductivity.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.93-97
• /
• 2014

Biodegradable drug-eluting stent has dual functions of supporting the lumen and treating internal tumor preventing the restenosis by releasing drug. In this study, the polycaprolactone (PCL) based three dimensional (3D) mesh loaded with paclitaxel (PTX) was presented by rapid prototyping (RP) technique of solid freeform fabrication (SFF) for biodegradable drug-eluting stent application. PCL has many advantageous properties such as good biocompatibility, good mechanical properties, and good drug permeability. PTX is widely used in the cancer treatment by inhibiting tumor cell proliferation. Analytical methods of HPLC and NMR were used for simultaneous quantification of PTX. Scanning electron microscopy (SEM) was performed to observe the architecture and morphologies of 3D mesh. The cytotoxicity assay results indicated released PTX's biological activity. This study provided that PCL based 3D mesh loaded with PTX by RP technique has great potential for biodegradable drug-eluting stent application.