• Journal of Biosystems Engineering
• /
• 제32권2호
• /
• pp.91-96
• /
• 2007

In this study, a prototype remote controlled weeder using solar module was developed and the evaluations of weeding, side walking and weeding performance were conducted to see if actual application was feasible in the paddy field. When traveling, the loss electric current was 8 to 15 A depending on operating and soil conditions. The average traveling speed was 0.25 m/s and the average slippage was 18%. When it side walked row by row, electric current consumption was 7 A on the average. When wheel rotors line went initially up and last down, electric current consumption was 12 to 15 A due to soil resistance. Electric current consumption when shifting wheel rotors line was less than 5 A due to no resistance. Field efficiency was 105 min/10a based on the test field. Operation was able to be done for 4.16 hours continually by 52 AH battery based on 300 W average maximum power consumption and 4.6 hours under sunny day considering solar module.

• 설비공학논문집
• /
• 제29권8호
• /
• pp.391-400
• /
• 2017

Understanding of seawater fouling characteristics is critical in designing a heat exchanger adapted in an effluent utilization system for a power plant. We reviewed three types of fouling mechanisms of general, biological, and crystallizing for a plate-frame heat exchanger, to be used for heat exchanging with heated effluent from a power plant. Also, mathematical models for each type of seawater fouling were suggested. Actual thermal resistance calculated from seawater fouling models were compared and implemented in designing a plate-frame heat exchanger. The bio-fouling model revealed the largest thermal resistance and the highest number of plates for a plate-frame heat exchanger under the same heat load. Overall heat transfer coefficient and pressure drop of a plate-frame heat exchanger under fouling conditions was lower by 58 percent and higher by 2.85 times than those under clean conditions, respectively.

• 한국식생활문화학회지
• /
• 제35권6호
• /
• pp.605-612
• /
• 2020

In this study, 11 plant extracts from Bangladesh were used to evaluate the total phenolic and flavonoid content, in vitro antioxidant activities using 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2-azinobis-(3-ethylbenzthiazolin-6-sulfonic acid) (ABTS), and ferric reducing antioxidant power (FRAP) assay. Also, the inhibitory effect of nitric oxide (NO) production in RAW 264.7 macrophage cell line and the neuroprotective effect on H2O2-induced PC12 cells were tested. Our results revealed that Piper betle L. showed the highest total phenolic content (162.2 mg GAE/g extract) among the 11 plants from Bangladesh. Most plants showed strong radical scavenging effects and ferric reducing antioxidant power. Besides, Piper betle L. protected PC12 neuronal cells against H2O2 related oxidative stress in LPS-induced PC12 cells. Regarding the anti-inflammatory effect, Piper betle L. significantly inhibited NO accumulation in LPS-induced RAW 264.7 cells. Our results provide evidence that Piper betle L. could be useful for the development of functional health foods.

• Preventive Nutrition and Food Science
• /
• 제22권1호
• /
• pp.16-20
• /
• 2017

This study investigated the antioxidant activity of functional beverage concentrates containing herbal medicine extracts (FBCH) using various antioxidant assays, such as 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radical scavenging activity, and reducing power assay. The total polyphenolic content of FBCH (81.45 mg/100 g) was higher than Ssanghwa tea (SHT, 37.56 mg/100 g). The antioxidant activities of FBCH showed 52.92% DPPH and 55.18% ABTS radical scavenging activities at 100 mg/mL, respectively. FBCH showed significantly higher antioxidant activities compared to the SHT (DPPH, 23.43%; ABTS, 22.21%; reducing power optical density; 0.23, P<0.05). In addition, intracellular reactive oxygen species generation significantly decreased in a concentration-dependent manner following FBCH treatment. These results suggest that the addition of herbal medicine extract contributes to the improved functionality of beverage concentrates.

• 멤브레인
• /
• 제18권1호
• /
• pp.44-52
• /
• 2008

본 연구는 poly(vinyl alcohol) (PVA)와 가교제 poly(styrene sulfonic acid-co-maleic acid) (PSSA_MA)을 이용하여 제조된 막에 tetraethylorthosilicate (TEOS)를 도입하여 물-에탄올 계에 대한 투과증발 실험을 다양한 가교온도별($120{\sim}140^{\circ}C$), 조업온도별($25{\sim}70^{\circ}C$)로 수행하였다. TEOS의 함량은 PVA 대비 3, 5, 7 wt%를 사용하였으며, 원액의 조성은 무게비로 물 10, 20, 30 및 50%에 대하여 조사하였다. 물 에탄올 = 10 : 90 조성, 조업온도 $50^{\circ}C$에서 선택도 1730과 투과도 $16.3g/m^2{\cdot}hr$를 PVA/7 wt% PSSA_MA/5 wt% TEOS 막이 보여 주었다.

• 유기물자원화
• /
• 제25권4호
• /
• pp.51-60
• /
• 2017

화력발전소에서 발생하는 유연탄 Bottom ash(BA)는 고온에서 연소 되고 남은 재이다. 고온에서 구워진 재료이기 때문에 맥반석과 같은 기능이 있을 것으로 사료되어 연구를 시작하였다. 최근 일반 모르터보다 황토, 맥반석 등이 재료로 들어가서 원적외선, 항균, 항곰팡이, 탈취, 조습 기능이 있는 모르터의 수요가 늘어가는 추세이다. 유연탄 BA를 친환경 바이오 혼합소재로 활용하기 위한 친환경 바이오 BA 모르터를 일반 모르터와 각각의 기능성에 대해 비교 시험한 결과 원적외선 방사율이 약 $0.02{\times}10^2W/m^2$ 정도 높게 측정되었으며, 탈취 기능은 약 26% 이상 높게 측정되었다. 조습의 경우에도 친환경 바이오 BA 모르터가 일반 모르터보다 약 1.8배 우수한 효과를 가지고 있는 것으로 나타났으며, 국토해양부에서 제정한 흡 방습 건축자재 "양호"기준보다 10% 이상 뛰어난 것으로 나타났다.

• Journal of Microbiology and Biotechnology
• /
• 제13권4호
• /
• pp.571-577
• /
• 2003

The intracellular metabolic fluxes can be calculated by metabolic flux analysis, which uses a stoichiometric model for the intracellulal reactions along with mass balances around the intracellular metabolites. In this study, metabolic flux analyses were carried out to estimate flux distributions for the maximum in silico yields of various metabolites in Escherichia coli. The maximum in silico yields of acetic acid and lactic acid were identical to their theoretical yields. On the other hand, the in silico yields of succinic acid and ethanol were only 83% and 6.5% of their theoretical yields, respectively. The lower in silico yield of succinic acid was found to be due to the insufficient reducing power. but this lower yield could be increased to its theoretical yield by supplying more reducing power. The maximum theoretical yield of ethanol could be achieved, when a reaction catalyzed by pyruvate decarboxylase was added in the metabolic network. Futhermore, optimal metabolic pathways for the production of various metabolites could be proposed, based on the results of metabolic flux analyses. In the case of succinic acid production, it was found that the pyruvate carboxylation pathway should be used for its optimal production in E. coli rather than the phosphoenolpyruvate carboxylation pathway.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1348-1356
• /
• 2017

Integration of wind generators with the conventional power plants will raise operational challenges to the electric power utilities due to the uncertainty of wind availability. Thus, the Generation Scheduling (GS) among the online generating units has become crucial. This process can be formulated mathematically as an optimization problem. The GS problem of wind integrated power system is inherently complex because the formulation involves non-linear operational characteristics of generating units, system and operational constraints. As the robust tool is viable to address the chosen problem, the modern bio-inspired algorithm namely, Grey Wolf Optimization (GWO) algorithm is chosen as the main optimization tool. The intended algorithm is implemented on the standard test systems and the attained numerical results are compared with the earlier reports. The comparison clearly indicates the intended tool is robust and a promising alternative for solving GS problems.

• Journal of Biosystems Engineering
• /
• 제26권2호
• /
• pp.163-168
• /
• 2001

A manipulator for test-cup attachment modules, which was a part of a robot milking system, was developed to reduce cost and labor for cow milking processing. A Cartesian coordinate manipulator was designed for the milking process, because it was quite flexible and can be constructed more economically than any other configuration. The manipulator was made use of DC motors, screws for power transmission, a RS422 interface system for the transmission of coordinate values and a one-chip microprocessor, 89C52. Performance tests of the manipulator were conducted to measure experimentally the precision of all axes. Some of the results are as follows. 1. The Cartesian coordinate manipulator was designed and built. Dimension of the three perpendicular axes (X, Y, and Z) and one arm’s axis(W) to pick up and transfer the modules were 700㎜$\times$450㎜$\times$550㎜$\times$650㎜. The arm’s axis moved the teat-cup attachment module, which attached four teat-cup to four teats, detached four teat-cup from four teats, was designed and manufactured by using CAD, CAM and CNC. 3. After 10 replications of exercising the manipulator, mean precision values(positioning error) of X, Y, Z axes wee 0.48㎜, 0.20㎜, 0.19㎜, respectively. Therefore, we conclude the axes to have a precision better than 0.5㎜, had no problem to operate correctly the milking manipulator.

• Journal of Biosystems Engineering
• /
• 제43권2호
• /
• pp.94-102
• /
• 2018

Purpose: In this study, a maintenance free super-capacitor battery charging system based on the photovoltaic module, to be used in agricultural electric carriers, was developed and its charging characteristics were studied in detail. Methods: At first, the electric carrier system configuration is introduced and the electric control components are presented. The super-capacitor batteries and photovoltaic module used in the experiment are specified. Next, the developed charging system consisting of a constant current / constant voltage Buck converter as the charging device and a super-capacitor cell as a balancing device are initiated. The proposed circuit design, a developed PCB layout of each device and a proportional control to check the current and voltage during the charging process are outlined. An experiment was carried out using a developed prototype to clarify the effectiveness of the proposed system. A power analyzer was used to measure the current and voltage during charging to evaluate the efficiency of the energy storage device. Finally, the conclusions of this research are presented. Results: The experimental results show that the proposed system successfully controls the charging current and balances the battery voltage. The maximum voltage of the super-capacitor battery obtained by using the proposed battery charger is 16.2 V, and the maximum charging current is 20 A. It was found that the charging time was less than an hour through the duty ratio of 95% or more. Conclusions: The developed battery charging system was successfully implemented on the agricultural electric carriers.