• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.4
• /
• pp.359-366
• /
• 2016

Exosome, a small vesicle secreted from cells, has diverse functions depending on cell origins and tissue types and plays a important role in cell viability and intercellular communication. Recently, many researchers have demonstrated the use of exosomes for the treatment of cancers and immune diseases, and the development of diagnostic biomarker. However, the secretion mechanism of exosome from skin cell and its physiological functions in skin remain unclear. Thus, this study aimed to explore whether keratinocyte-derived exosome affects proliferation and migration in HaCaTs. Exosomes were isolated from HaCaTs by ExoQuick-TC and then boiled or unbolied. Boiled and unboiled exosome induced proliferation in HaCaTs in a dose-dependant manner ($0.1{\sim}20{\mu}g/mL$), respectively. Boiled and unboiled exosome at concentration of $20{\mu}g/mL$ increased proliferation level in HaCaTs by $186.96{\pm}3.87%$ and $193.48{\pm}10.48%$ compared with control group. Unboiled exosome stimulated migration in HaCaTs in a dose-dependent manner ($0.1{\sim}20{\mu}g/mL$), which reached a maxium at concentration of $20{\mu}g/mL$ ($179.39{\pm}4.89%$ of control), but boiled exosome did not affect HaCaT migration. In addition, unboiled exosome ($0.1{\sim}20{\mu}g/mL$) dose-dependently stimulated sprout outgrowth in HaCats. These results demonstrate that in exosome from HaCaTs, heat-stable components such as lipid may induce HaCaT proliferation and heat-unstable components such as protein may stimulate migration and sprout outgrowth in HaCaTs, thereby leading to reepithelialization and skin-wound healing activities. It is concluded that exosomes from HaCaTs may be used as cosmetic materials.

• Journal of radiological science and technology
• /
• v.37 no.4
• /
• pp.239-246
• /
• 2014

Filter absorbs low-energy X-ray to increase the average energy and reduces patient exposure dose. This study investigates if the materials of Mo and W could be used for the digital imaging device CR by conducting image assessment and dose measurement of SNR, FOM and histogram. In addition, measurement of beam quality was conducted depending on the material of the filter, and at the same time, a proper combination of filters was examined depending on the change in tube voltage (kVp). In regard to entrance skin dose, Mo filter showed the dose reduction by 42~56%, compared to Cu filter. Moreover, Mo filter showed higher transmission dose by around 1.5 times than that of Cu filter. In image assessment, it was found that W was unsuitable to be used as a filter, whereas Mo could be used as a filter to reduce dose without decline in image quality at the tube voltage of 80 kVp or higher. As tube voltage increased, 2.0 mm Al+0.1 mm Mo almost had a similar histogram width to that of 2.0 mm Al+0.2 mm Cu. Therefore, Mo filter can be used at relatively high tube voltage of 80 kVp, 100 kVp and 120 kVp. The SNR of 2.0 mm Al+0.1 mm Mo did not show any significant difference from those of 2.0 mm Al+0.2 mm Cu and 2.0 mm Al+0.1 mm Cu. As a result, if Mo filter is used to replace Cu filter in general radiography, where 80 kVp or higher is used for digital radiation image, patient exposure dose can be reduced significantly without decline in image quality, compared to Cu filter. Therefore, it is believed that Mo filter can be applied to chest X-ray and high tube voltage X-ray in actual clinical practice.

• Journal of radiological science and technology
• /
• v.38 no.3
• /
• pp.305-313
• /
• 2015

After Fukushima Daiichi nuclear disaster in 2011, study and maintenance of monitoring systems have been made at home and abroad. As concerns about radioactive contamination of water have increased in Korea, update of maintenance of managing radioactive materials in water is being made mainly by Ministry of Environment. In this study, we analysed current state of monitoring system modification in Japan, the country directly involved and neighboring country. According to the result, Japan modified the legislations first. Then Ministry of Education, Culture, Sports, Science and Technology (MEXT) provides theoretical background of radiological monitoring. And Ministry of the Environment actually watches state of water pollution in public waters and underground water. Finally related agencies like local government are monitoring current state of radioactive contamination in water environment. By region, local monitoring stations share the investigation of the whole country. Also, additional monitoring is running around nuclear facilities. After Fukushima disaster, monitoring for area near Fukushima is added. Among the reference levels, management target value of drinking water and tap water is 10 Bq/kg, and those of public water and underground water are 1 Bq/L. Measuring intervals varied from every hour to once a year, regularly or irregularly depending on the investigation. The main measuring items are air dose rate, gross ${\alpha}$, gross ${\beta}$, ${\gamma}$ radionuclide, Cs-134, Cs-137, Sr-89, Sr-90, I-131, and so on. In comparison, regulations about general public water in Korea need to be modified, while those about area near nuclear facility and drinking water are organized well. In future, therefore, domestic system would be expected to be modified with making reference to the guidelines like WHO's one. As good case of applying international guideline to domestic environment, Japanese system could be a reference when general standard of radioactivity in public water is made in Korea.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.5
• /
• pp.655-661
• /
• 2010

The nutraceutical role of fermented omija (Schizandra chinensis) beverage (FOB) was determined through the analysis of fibrinolytic and alcohol metabolizing activities, nitrite scavenging activity, and angiotensin converting enzyme and $\alpha$-glucosidase inhibitory effects. Firstly, FOB increased fibrinolytic activity in a dose-dependent manner and indicated angiotensin converting enzyme inhibitory activity of 94.8% at 20% FOB (0.6 mg/mL). In addition, the inhibitory activities of FOB on $\alpha$-amylase and $\alpha$-glucosidase were determined to be 100% at 100% FOB (3 mg/mL) and 49% at 60% FOB (1.8 mg/mL), respectively. Nitrite scavenging activity of FOB was about 96.1%, 72.3%, and 68.3% on pH 1.2, 3.0, and 6.0 at 100% FOB, respectively. To determine influence of FOB on alcohol metabolism, the generating activities of reduced-nicotinamide adenine dinucleotide (NADH) by alcohol dehydrogenase (ADH) and acetaldehyde dehydrogenase (ALDH) were measured. Facilitating rate of ADH activity was 70.3% at 50% FOB, but ALDH activity was not affected. These results revealed that FOB has a strong alcohol metabolizing activity, and fibrinolytic and nitrite scavenging activities and exhibits the angiotensin converting enzyme, $\alpha$-amylase, and $\alpha$-glucosidase inhibitory activities.

• Journal of Life Science
• /
• v.18 no.8
• /
• pp.1106-1114
• /
• 2008

The antioxidants activities in water and 95% ethanol extracts of wa-song (Orostachys japonicus A. Berger) dried by sun, hot air and lyophilization were measured in vitro reaction system. In reaction system containing linoleic acid, the antioxidant activities against lipid oxidation enhanced in proportion to storage time. The antioxidant activity of ethanol extracts was higher than that of water extracts. In the drying methods, wa-song extracts showed higher antioxidant activity in the other of hot air-dried, lyophilized and sun-dried. The lipid oxidation system containing the promoting factors, such as $Fe^{+2}$ and $Cu^{+2}$ions, also showed that the ethanol extract of hot air-dried wa-song possessed the highest antioxidant activity. Soybean oil and lard being added with various levels (0.1, 0.5 and 1.0 g/100 g) of the ethanol extract of hot air-dried wa-song were stored at $60^{\circ}C$ (for 28 days) or $180^{\circ}C$ (for 48 hr). Its extract appeared to lower the acid value of soybean oil, wheras it failed to lower the acid value for lard at early storage time, but it was lower than control and BHT after 28 days. Anicidine value and peroxide value were lower soybean and lard added wa-song extract than control and BHT for storage for 28 days at $60^{\circ}C$. In 28 days, its value was significantly decreased in proportion to sample concentration. TBA value was increased during storage time at $60^{\circ}C$, but it was significantly decreased by sample concentration after storage 36 hours at $180^{\circ}C$ storage. Therefore results suggest ethanol extract of hot air-dried wa-song could be potential candidates for natural antioxidants for materials containing lipid.

• Journal of Food Hygiene and Safety
• /
• v.21 no.2
• /
• pp.82-91
• /
• 2006

Standard and lead limit test in general test method of Korea, Japan, Joint FAO/WHO Expert Committee of Food Additives (JECFA), USA, and EU on synthetic and natural food additives were compared. There were found that the general test methods in 'Korea Food Additives Code' were different from standards of various institutes on lead limit test. For the lead limit test of food additives, Korea used dithizone method, Japan used atomic absorption spectrophotometry, and USA used dithizone method, flame atomic absorption spectrophotometric method, atomic absorption spectrophotometric graphite furnace method, and APDC extraction method. In addition, JECFA and EU used dithizone method and atomic absorption spectrophotometric method. The dithizone methods of Korea, USA, and JECFA were nearly identical. In the case of USA, JECFA, and EU, the analytical methods for lead limit test were shown in individual monograph. Lead limit test against 13 synthetic, such as magnesium stearate and L-cystine, and 12 natural, such as gua gum and diatomaceous earth, food additives distributed in Korea were performed by the analytical method of each institute. Although all institutes use various methods for analysis of lead, contents of lead in food additives tested fell into the standard of each institute.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.203-215
• /
• 2007

Statement of problem: Titanium and its alloy, with their excellent bio-compatibility and above average resistance to corrosion, have been widely used in the field of dentistry. However, the excessive oxidization of titanium which occurs during the process of firing on porcelain makes the bonding of titanium and porcelain more difficult than that of the conventional metal-porcelain bonding. To solve this problem related to titanium-porcelain bonding, several methods which modify the surfaces, coat the surfaces of titanium with various pure metals and ceramics, to enable the porcelain adhesive by limiting the diffusion of oxygen and forming the adhesive oxides surfaces, have been investigated. Purpose: The purpose of this study was to know whether the titanium-porcelain bonding strength could be enhanced by treating the titanium surface with gold and TiN followed by fabrication of clinically applicable porcelain-fused-to-titanium crown Material and method: The porcelain-fused-to-titanium crown was fabricated after sandblasting the surface of the casting titanium coping with $Al_2O_3$ and treating the surface with gold and TiN coating followed by condensation and firing of ultra-low fusing porcelain. To compare with porcelain-fused-to-titanium crowns, porcelain-fused-to-gold crowns were fabricated and used as control groups. The bonding strengths of porcelain-fused-to-gold crowns and porcelain-fused-totitanium crowns were set for comparison when the porcelain was fractured on purpose to get the experimental value of fracture strength. Then, the surface were examined by SEM and each fracturing pattern were compared with each other Result:Those results are as follows. 1. The highest value of fracture strength of porcelain-fused-to-titanium crowns was in the order of group with gold coating, group with TiN coating, group with $Al_2O_3$ sandblasting. No statistically significant difference was found among the three (P>.05). 2. The porcelain-fused-to-gold crowns showed the highest value in bonding strength. The bonding strength of crowns porcelain-fused-to-titanium crowns of rest groups showed bonding strength reaching only 85%-94% of that of PFG, though simple comparision seemed unacceptable due to the difference in materials used. 3. The fracturing patterns between metal and porcelain showed mixed type of failure behavior including cohesive failure and adhesive failure as a similar patterns by examination with the naked eye and SEM. But porcelain-fused-to-gold crowns showed high incidence of adhesive failure and porcelain-fused-to-titanium crowns showed high incidence of cohesive failure. Conclusion: Above results proved that when fabricating porcelain-fused-to-titanium crowns, treating casting titanium surface with gold or TiN was able to enhance the bonding strength between titanium and porcelain. Mean value of masticatory force was found to showed clinically acceptable values in porcelain bonding strength in all three groups. However, more experimental studies and evaluations should be done in order to get better porcelain bonding strength and various surface coating methods that can be applied on titanium surface with ease.

• Journal of Life Science
• /
• v.25 no.9
• /
• pp.993-999
• /
• 2015

The beetle Popillia flavosellata has been no reported its functional effects. In this study, we investigated the anti-inflammatory effect of P. flavosellata ethanol extract (PFE) on RAW 264.7 mouse macrophage cells treated with lipopolysaccharide (LPS) for the induction of inflammation. First, we examined the cytotoxicity of PFE in the RAW 264.7 cells at a concentration of 2,000 μg/ml or less. To evaluate the anti-inflammatory effects of PFE, we investigated the expression levels of proinflammatory cytokines, such as tumor necrosis factor (TNF)-α and interleukin (IL)-6, and proinflammatory enzymes, such as inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2) in LPS-induced RAW 264.7 cells. In addition, we examined whether PFE inhibited the translocation of nuclear factor kappa B (NF-κB) p65 into the nucleus in the LPS-induced RAW 264.7 cells. We found that the protein levels of TNF-α and IL-6 were decreased in the LPS-induced RAW 264.7 cells after the treatment with PFE in a dose-dependent manner. In addition, we confirmed that PFE inhibited the translocation of NF-κB p65 into the nucleus, as well as the protein expression levels of iNOS and COX-2. Accordingly, we propose that PFE exerts an anti-inflammatory effect through the down-regulation of NF-κB p65, TNF-α, IL-6, iNOS, and COX-2 via the toll like receptor (TLR)-4 inflammatory signaling pathway.

• Journal of Food Hygiene and Safety
• /
• v.20 no.3
• /
• pp.134-140
• /
• 2005

Boiling point and distillation range, melting range, and identification methods in general test method of Korea, Japan, Joint FAO/WHO Expert Committee of Food Additives (JECFA), and USA on chemical food additives were compared. Boiling point of propylene glycol was indicated as boiling point in Korea, distillate in Japan, distillation range in JECFA and USA, and its value was up to the standard. Distillation range of propionic acid was indicated as distillate in Korea and Japan, distillation range in JECFA and USA, and its value was up to the standard. There is no standard on distillation range of isopropyl alcohol in Japanese method. Test method of melting range on synthetic food additives was identical in all organizations, and there are 28 items to which this test method applies in Korean Food Additives Code. The standards on molting range of D-mannitol were different in various organizations, and in USA method there are no standards to which L-ascorbic acid, calciferol, and fumaric acid apply. Synthetic food additives performing the identification test were 251 items in Korean Food Additives Code, but there are no items to which manganese, glycerophosphate, bromate, thiosulfate, and bromide apply. Calcium benzoate was dissolved by heating in benzoate test and we could not identify the citrate in ferric citrate by method (2) of Korea and Japan. Identification test methods for ammonium, lactate, magnesium, copper, sulfate, phosphate, and zinc were identical in all organizations, and these could be identifed by current identification methods.

• Journal of Chest Surgery
• /
• v.31 no.11
• /
• pp.1023-1030
• /
• 1998

Background: Calcific degeneration limits durabilities of the bioprosthetic tissues implanted in the human body. The direct coupling sulphonated polyethyleneoxide(PEO-SO3) to the bioprosthetic tissues after glutaraldehyde(GA) fixation and the removal of residual aldehyde groups from the tissues can augment the effect of calcification-resistance. Materials and methods: To study the anti-calcification effect by PEO-SO3 modification and the removal of the residual aldehyde groups of tissues, surface modified bovine pericardia(BP-PEO-SO3) were preserved in aseptic saline to wash out GA(saline group) and 0.65% GA solution(GA group). And then above two groups and PERIGUARD (Bio-vascular. Co.) (product group) were evaluated with respects to calcium contents and microscopic findings using in vivo implantation models at carotid and femoral artery and peritoneum of 8 adult dogs. Results: In the tissues retrieved from carotid artery, calcium content was significantly decreased in saline group than in other two groups(saline; 2.89±0.31 vs. GA; 6.14±1.08 vs. product; 22.82±5.00 mg/g of dried tissue; p<0.05). In the tissues retrieved from femoral artery and peritoneum, calcium amount was also decreased in saline group than in other two groups, but not reached the significant difference between groups. On the other hand, the pathologic findings of pericardial tissues showed marked destructuction in GA group compared to the other two groups. Conclusions: In this study, covalently PEO-SO3 bound to bovine pericardium decreased calcifications and the anti-calcification effect of BP-PEO-SO3 could be augmented by the washing out the residual aldehyde groups using saline after GA fixation. Conclusively, the PEO-SO3 modified bovine pericardium is highly resistant to calcification and can be useful for the development of calcification-resistant cardiovascular patches and valves.