• Microbiology and Biotechnology Letters
• /
• v.37 no.4
• /
• pp.377-382
• /
• 2009

Viral safety is an important prerequisite for clinical preparations of all biopharmaceuticals derived from plasma, cell lines, or tissues of human or animal origin. To ensure the safety, implementation of multiple viral clearance (inactivation and/or removal) steps has been highly recommended for manufacturing of biopharmaceuticals. Of the possible viral clearance strategies, Ultraviolet-C (UVC) irradiation has been known as an effective viral inactivating method. However it has been dismissed by biopharmaceutical industry as a result of the potential for protein damage and the difficulty in delivering uniform doses. Recently a continuous flow UVC reactor (UVivatec) was developed to provide highly efficient mixing and maximize virus exposure to the UV light. In order to investigate the effectiveness of UVivatec to inactivate viruses without causing significant protein damage, the feasibility of the UVC irradiation process was studied with a commercial therapeutic protein. Recovery yield in the optimized condition of $3,000\;J/m^2$ irradiation was more than 98%. The efficacy and robustness of the UVC reactor was evaluated with regard to the inactivation of human immunodeficiency virus (HIV), hepatitis A virus (HAV), bovine herpes virus (BHV), bovine viral diarrhea virus (BVDV), porcine parvovirus (PPV), bovine parvovirus (BPV), minute virus of mice (MVM), reovirus type 3 (REO), and bovine parainfluenza virus type 3 (BPIV). Non enveloped viruses (HAV, PPV, BPV, MVM, and REO) were completely inactivated to undetectable levels by $3,000\;J/m^2$ irradiation. Enveloped viruses such as HIV, BVDV, and BPIV were completely inactivated to undetectable levels. However BHV was incompletely inactivated with slight residual infectivity remaining even after $3,000\;J/m^2$ irradiation. The log reduction factors achieved by UVC irradiation were ${\geq}3.89$ for HIV, ${\geq}5.27$ for HAV, 5.29 for BHV, ${\geq}5.96$ for BVDV, ${\geq}4.37$ for PPV, ${\geq}3.55$ for BPV, ${\geq}3.51$ for MVM, ${\geq}4.20$ for REO, and ${\geq}4.15$ for BPIV. These results indicate that UVC irradiation using UVivatec was very effective and robust in inactivating all the viruses tested.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.12
• /
• pp.1381-1389
• /
• 2007

Wastewater discharged by industrial activities of metal finishing and electroplating units is often contaminated by a variety of toxic or otherwise harmful substances which have a negative effects on the water environment. The treatment method of heavy metal-cyanide complexes wastewater by alkaline chlorination have already well-known($1^{st}$ Oxidation: pH 10, reaction time 30 min, ORP 350 mV, $2^{nd}$ Oxidation: ORP 650 mV). In this case, the efficiency for the removal of ferro/ferri cyanide by this general alkaline chlorination is very high as 99%. But the permissible limit of Korean waste-water discharge couldn't be satisfied. The initial concentration of cyanide was 374 mg/L(the Korean permissible limit of cyanide is 1.0 mg/L max.). So a particular focus was given to the treatment of heavy metal-cyanide complexes wastewater by $Zn^{+2}/Fe^{+2}$ ion and coprecipitation after alkaline chlorination. And we could meet the Korean permissible limit of cyanide(the final concentration of cyanide: 0.30 mg/L) by $Zn^{+2}/Fe^{+2}$ ion and coprecipitation(reaction time: 30 min, pH: 8.0, rpm: 240). The removal of Chromium ion by reduction(pH: 2.0 max, ORP: 250 mV) and the precipitation of metal hydroxide(pH: 9.5) is treated as 99% of removal efficiency. The removal of Copper and Nickel ion has been treated by $Na_2S$ coagulation-flocculation as 99% min of the efficiency(pH: $9.09\sim10.0$, dosage of $Na_2S:0.5\sim3.0$ mol). It is important to note that the removal of ferro/ferri cyanide of heavy metal-cyanide complexes wastewater should be employed by $Zn^{+2}/Fe^{+2}$ ion and coprecipitation as well as the alkaline chlorination for the Korean permissible limit of waste-water discharge.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.3
• /
• pp.657-665
• /
• 2017

This study is for checking the possibility of Lotus Rhizome and node of Lotus Rhizome as cosmetic materials. For this we carried out biological active evaluation about anti-oxidant, anti-inflammatory and anti-wrinkle by using ethanol extract of Lotus Rhizome and node of Lotus Rhizome. We extracted Lotus Rhizome and node of Lotus Rhizome with 95% ethanol and then in order to evaluate anti-oxidant activity we treated samples by concentrations (100, 500, 1000) ${\mu}g/mL$ and carried out 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging and The activity of 2, 2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) cation radical scavenging. Also, in order to evaluate effect of anti-wrinkle we carried out evaluation of Elastase inhibitory activity. To evaluate effect of anti-inflammatory we evaluated toxicity of samples through MTT assay with a macrophage (Raw 264.7 cells) and measured nitric oxide production inhibitory activity. As a result, DPPH radical scavenging activity of Lotus Rhizome and node of Lotus Rhizome at $1000{\mu}g/mL$ was 66.7% and 99.5%, respectively and ABTS + radical scavenging activity was 51.2% and 98.3% at the same concentration, respectively. Elastase inhibitory activity results showed that the nodes of the Lotus Rhizom extract excellent anti-wrinkle efficacy than Lotus Rhizom. Node of Lotus Rhizome showed higher anti-wrinkle activity than the positive the control group BHT at $1000{\mu}g/mL$ concentration. According to the result of nitric oxide production inhibitory activity, Lotus Rhizom showed 55.8% effect and nodes of the Lotus Rhizom showed 66.6% effect respectively. This showed that effect of anti-inflammatory was greater in nodes of the Lotus Rhizom extracts. As a result it suggests that Lotus Rhizome and node of Lotus Rhizome extracts can be used as natural substance of cosmetics which are safe in antioxidant, anti-inflammatory, and anti-wrinkle.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.699-705
• /
• 2010

In this study, three different biological activated carbons (BACs) were prepared from activated carbons made of each coal (F400, Calgon), coconut (Samchully) and wood(Pica, Picabiol) which were run for two and half years in the pilot plant. The attached bio-film microorganisms in and on the BACs were isolated and identified. The results showed that nine different bacteria species (Chryseomonas luteola, Stenotrophomonas maltophilia, Pseudomonas vesicularis, Aeromonas hydrophila, Spingomonas paucimobilis, Agrobacterium radiobacter, Pseudomonas fluorescens, Spirillum spp., and Pasteurella haemolytica) were isolated and identified, the dominant species was Pseudomonas sp. that had occupied 56.5%. More specifically, it was observed that the populations of the microorganisms deceased in the order: Pasteurella haemolytica (18.9%) > Chryseomonas luteola (4.0%) > Agrobacterium radiobacter (3.5%) > Aeromonas hydrophila (2.0%) in and on the BACs. After isolating of 9 species of biofilm microorganisms, the growth curve for the biomass was investigated. During 24~96 hours, the biomass has the highest concentration, and activity of the biomass was the best to uptake geosmin as carbon resources. The operation temperatures for investigating the biodegradation of geosmin were set at $4^{\circ}C$ and $25^{\circ}C$. Pseudomonas vesicularis, Pseudomonas fluorescens, Agrobacterium radiobacter and Stenotrophomonas maltophilia played a maior role in removing the target compound as geosmin. However, geosmin was not biodegraded well by Chryseomonas luteola, Spingomonas paucimobilis, and Spirillum spp.. It is also interesting to evaluate kinetics of biodegradability of geosmin. The first-order rate constants for biodegradability of geosmin at $4^{\circ}C$ and $25^{\circ}C$ were $0.00006{\sim}0.0002\;hr^{-1}$ and $0.0043{\sim}0.0046\;hr^{-1}$ respectively. Higher water temperature produced better geosmin removal rates. When concentrations of geosmin increased from 10 to 10,000 ng/L, the rate constants for biodegradability of geosmin increased from 0.0003 to $0.0882\;hr^{-1}$. As described earlier, higher geosmin concentration in the reactor produced higher rate constant.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.1
• /
• pp.75-85
• /
• 2016

Pectin, a naturally occurring polysaccharide, has in recent years attracted considerable attention. Its benefits are increasingly appreciated by scientists and consumers due to its safety and usefulness. The chemistry and gel-forming characteristics of pectin have enabled to be used in pharmaceutical industry, health promotion and treatment. Yet, it has been rarely used in cosmetics because of its incompatibility with many cosmetic ingredients, including alcohols, and unstable viscosity of pectin gels under various pH and salt conditions. However, low-molecular-weight pectin oligomers have excellent biological activities, and depolymerization of pectin to produce cosmetic ingredients would be very useful. In this study, we attempted the development of cosmetic ingredients using pectin with an excellent effect on human skin. We developed a bio-conversion process that uses enzymatic hydrolysis to produce pectin hydrolysates containing mainly low-molecular-weight pectin oligomers. Gel permeation chromatography was used to determined the ratio of hydrolysis. The molecular weight of the pectin hydrolysates obtained varied between 200 and 2,700 Da. The two newly developed low-molecular-weight pectin hydrolysates, LMPH A and B, had higher anti-oxidative activities than pectin or D-galacturonic. Exposure to UVB radiation induces apoptotic cell death in epidermal cells. Annexin V binding and propidium iodide uptake were measured by flow cytometry to evaluate UVB-induced cell death in HaCaT cells. Both LMPH A and B reduced UVB-induced cell death and increased cell proliferation by 22% and 30% at 0.5% concentration respectively, while pectin had no significant activity. In conclusion, this study suggests that the newly developed low-molecular-weight pectin hydrolysates can be used as safe and biologically active cosmetic ingredients.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.20 no.1
• /
• pp.29-35
• /
• 2010

To compare the quality of manufactured goods distributed in the domestic markets, 6 isolates of Dongchongxiacao products, namely, 4 Paecilomyces tenuipes specimens (J2P, 901A, 901B, and 901C), 1 Cordyceps militaris specimen (901D), and 1 Cordyceps sinensis specimen (CI-1), were analyzed for their physicochemical properties and sequence-structure relationships. P. tenuipes (J2P), a kind of Dongchongxiacao, was successfully inoculated on silkworms by percutaneous infection of Rural Development AdminstraionNam et al., 1999); fruiting bodies were then formed on the complete surface of the pupa. Since P. tenuipes (J2P) from silkworm larva was also proved to have remarkable pharmacological activities, it has been produced in bulk and has been successfully sold to buyers in the Korean market. Additionally, imitation products such as 901A, 901B, 901C, 901D, and CI-1 were sold simultaneously, resulting in deterioration of product quality. This research focuses on establishing quality standards to discriminate between the original and imitation products circulating in the market. The products obtained for the experiments included J2P, 901A, 901B, 901C, 901D, and CI-1; proximate analysis was performed for these products. The hosts and methods of conidia inoculation for proliferation of mycelia differed among the products. P. tenuipes (J2P) was proliferated in live silkworm larvae, and dead silkworm pupae were used to produce 901A, 901B, and 901C. On the other hand, 901D was produced on hulled rice medium. Quality analysis of C. sinensis revealed that CI-1, which was imported from China, smelled bad and proved to be a counterfeit with the fruiting body glued to the insect by twigs. The results of the proximate analysis of 901A, 901B, 901C, and 901D were similar to those of J2P with respect to the moisture content. Otherwise, J2P contained higher crude protein than 901A, 901B, 901C, and 901D, but contained very low fat. C. militaris (901D) and C. sinensis (CI-1) had low crude protein content-12.79% and 9.78% respectively-as compared to that of J2P, which was 62.38%. In contrast to the crude ash content of 6.4% in J2P, the crude ash content of CI-1 was 18.51% and this specimen was found to contain many impurities. phylogenetic analysis of P. tenuipes revealed that the sequence similarity of J2P, 901B, and 901C was in the range of 92.3~92.7%. Additionally, differences in the sequences were found at the positions 65 bp, 436 bp, 441 bp, 463 bp, etc.

• Food Science and Preservation
• /
• v.14 no.1
• /
• pp.47-53
• /
• 2007

Soybean curd was mixed with onion powder to develop new foods, and changes in quality characteristics were investigated. The moisture content of onion soybean curd rose as the proportion of onion powder increased Whiteness (as measured by the L value) was high in soybean cud admixed with 0.1% (w/v) onion powder, Redness (the a value) was not significantly altered (the readings were 1.03-1.54) on addition of various onion powder concentrations. Yellowness (the b value) was similarly unaffected (readings 13.00-13.93) when various levels of onion powderwere added. Free sugar analysis showed that glucose was high in soybean curd (67.22 g/100 g) admixed with 0.1% (w/v) onion powder, The main organic acid was tartaric acid, and control organic acids included citric and oxalic acids at high levels. The major free amino acids were L-arginine, ${\gamma}-Amino-n-butyric$ acid, L-histidine, L-glutamic acid, L-serine, L-tyrosine and L-threonine, and amino acid content were high in soybean curd admixed with 0.2% (w/v) onion powder. Major phenolic compounds of onion soybean curd were quercitrin, protocatechuic acid and caffeic acid. The hardness of onion soybean curd was similar to that of the control when onion powder was added to 0.1% or 0.2% (w/v), and decreasedmore onion powder was added. Organoleptic qualities dropped as onion powder levels increased. In summary, onion powder addition to soybean curd is optimal at the 0.2% (w/v) level..

• Food Science and Preservation
• /
• v.22 no.4
• /
• pp.613-621
• /
• 2015

In this study, the anti-oxidant and anti-inflammatory activities of water extract (ASSW) and 70% ethanol extract (ASSE) of Allium sativum L. stems were investigated using Raw 264.7 cells induced by lipopolysaccharide (LPS). ABTS radical scavenging activities of ASSW and ASSE at $1000{\mu}g/mL$ concentration were 96.9% and 97.8%, respectively. In order to investigate the potential anti-inflammatory effects of ASSW and ASSE, nitric oxide (NO), pro-inflammatory cytokines, interleukin-6 (IL-6), and tumor necrosis factor including ${\alpha}$ (TNF-${\alpha}$), interleukin-$1{\beta}$ (IL-$1{\beta}$), and prostaglandin-E2 (PGE2) were measured. ASSW and ASSE at $100{\mu}g/mL$ concentration showed inhibitory effects against NO production by 18% and 23%, respectively. Production of IL-$1{\beta}$ and IL-6 after treatment with ASSW and ASSE at $100{\mu}g/mL$ decreased by approximately 28% and 15% for ASSW and 17% and 12% for ASSE, respectively. In addition, production of TNF-${\alpha}$ after treatment of $100{\mu}g/mL$ of ASSW and ASSE decreased by 24% and 23%, respectively. In addition, the treatment of $100{\mu}g/mL$ of ASSW and ASSE showed inhibitory expressions against PGE2 by 45.47% and 33.87%, respectively. These results suggested that ASSE showed greater inhibitory activity than that of the ASSW by the suppression of inflammatory mediators, including NO, IL-6, TNF-${\alpha}$ and PGE2 production, and the expressions of iNOS and COX-2 in macrophages. In conclusion, ASSW and ASSE may have some ancillary effects on inflammatory factors as potential anti-inflammatory agents.

• Korean Journal of Ichthyology
• /
• v.19 no.1
• /
• pp.8-15
• /
• 2007

The morphology of gonad and reproductive cycle of ribbed gunnel (Dictyosoma burgeri) were investigated on the basis of histological observation. The specimens were monthly sampled in the coastal waters of Jeju from November 2001 to February 2003. The ovaries and testis of this species are categorized as cystovarian and lobule type, respectively. The gonadosomatic index (GSI) of female increased in November and maintained high values from December to February. The GSI of male was similar to that of female although it was decreased in February. The reproductive cycle can be grouped into the following successive stage in the ovary: growth (October to November), mature (November to February), spawning (January to February), and degenerating and recovery (March to September). And in the testis, the stage observed were: multiplication (August to November), growth (November to January), mature and spawning (November to February), and degenerating and recovery (January to September). The minimum maturation size of D. burgeri was over 15.0 cm and fecundity ranged from 2,194 to 6,581 eggs. The relationship between the fecundity and fish body was calculated in the fecundity (F) equation as: $F=0.4057TL^{3.1425}$ ($R^2=0.7621$) for total length (TL); $F=149.88BW^{0.9579}$ ($R^2=0.7982$) for body weight (BW), respectively. The fecundity was correlated positively with TL and BW. The histological observations of the gonads suggested that major spawning of this species probably occurs between January to February, when low water temperature ($13{\pm}0.3^{\circ}C$) period.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.2
• /
• pp.268-277
• /
• 2013

This study investigates the effects of accumulated levels of heavy metals and nutrients of cultivated soybean plant tissues, after the continuous application of sewage sludge (SS) and industrial sludge (IS). SS and IS were applied to soybean plants at loading of 0, 11.25, 22.50, and 45.00 Mg/ha, and the contents of heavy metals (Cd, Pb, Ni, Cu, and Zn), proteins, and amino acids in the cultivated soybean plants were measured. The Cd content in the soybean was 0.02~0.05 mg/kg, which is within the safety level set in the standard, and that of Pb was 0.02~0.15 mg/kg, which is also within the safety level except for IS 45 Mg/ha. The soybean harvest quantity was higher in the treatment groups than the control group in the first year. However, in the second year, SS had lower harvest and IS had the same level or a decreasing tendency, compared with the control group. In the first year, the content of amino acid which followed handling of SS was increased in the sludge groups more than in the control group in the case of glutamate. However, the influence of continuous application was increased in the sludge groups in the case of amino acids of 12 types. In conclusions, the accumulation in soybean of heavy metals by sludge treatment is not a problem, but the decreased yields needs to be considered. In addition, the most appropriate level of sludge treatment was 11.25 Mg/ha.