• Journal of Applied Biological Chemistry
• /
• v.57 no.4
• /
• pp.331-336
• /
• 2014

Sediment and nutrient loading caused by the forest to conversion of agricultural lands have led to the deterioration in near water ecosystem. This study was carried out to examine the effects of agroforest culture field and open field culture field on water quality and runoff loading of nutrient. The runoff loading of Tot-N and Tot-P in agroforest culture field were similar to open field culture field. The runoff loading of total suspended solids (TSS) in agroforest culture field and open field culture field were $2,721kg{\pm}196/10a$ and $420{\pm}29kg/10a$ in 2011 and $696kg{\pm}59/10a$ and $463{\pm}36kg/10a$ in 2012, respectively. Our investigation showed that the runoff loading of TSS from agroforest culture field decreased when soil cover and soil stabilization increased. Therefore, protect facility of soil erosion for early alteration of agricultural lands are needed to minimize the soil erosion from agroforest culture field.

• Journal of Marine Bioscience and Biotechnology
• /
• v.1 no.1
• /
• pp.40-47
• /
• 2006

Large scale marine biodiversity studies in China have been carried out for more than half a century since the founding of the Institute of Oceanology, CAS, in 1950. Through a series of coastal and multi-disciplinary oceanographic investigations in the shelf seas and biodiversity studies since the late fifties, a total of 20,278 species of marine biota have been recorded upto 1994. Recent intensive studies have further revealed the richness of marine biota of the China seas,a great number of marine species have been found and many new taxa established. The total species number of main biotic groups increased about 50 % of that estimated in 1994. The results have promoted the fast development of China's marine fisheries, medicine (drug) and biodiversity research, and attracted many scientists, particularly bio-technologists, to join their studies. Environmental deterioration and human activity strongly stressed the sustainable development and conservation of marine bio-diversity, and resulted in the increase of end angered species as record ed in the new published ${\ll}$China Species Red List${\gg}$ with the threatened category of species assessed by adopting the new IUCN criteria. To further reveal the high diversity and their history, present status and future of marine organisms existed in the world ocean, an international Project ${\ll}$Census of Marine Life (CoML)${\gg}$ was established in 2000 in the USA. Scientists predicted that 2 to 3 times of numbers of the known species will possibly be found in various marine habitats, particularly the abyssal ocean. The Research Plan and the Projects were briefly introduced, and the relationship between marine biodiversity and biotechnology was discussed. The Project planned to apply new and high techniques and new equipments on board research vessel and in laboratory. Brief review of recent advances of Chinas' marine biodiversity and biotechnology studies indicated that fascinate results have been achcieved; but further effort should be made to promote the continuous advance of our basic researches and their application in related production and maintain sustainable development.

• Tribology and Lubricants
• /
• v.38 no.2
• /
• pp.41-52
• /
• 2022

Mineral electrical insulating oil, which is widely used in transformers, exhibits excellent cooling performance and transformer efficiency. However, given that it is composed of petroleum-based components, it is weak in terms of biodegradability. This causes environmental problems in case of leakage and a low flash point, which is a factor that would cause great damage in the event of a fire in a substation. In this context, the use of eco-friendly electric insulating oil composed of bio-based vegetable oil and synthetic ester, which has excellent biodegradability and flame retardancy performance, has recently been expanded to the field of electric power, and various research and development (R&D) studies are in progress. According to different research results, vegetable oil and synthetic ester manufacturing technology, thermal stability, oxidation stability, property change, and quality control, which are characteristics of eco-friendly electrical insulating oils, are major factors affecting the maintenance of insulating oil properties. In addition, power companies have established and operated quality control standards according to the use of eco-friendly electrical insulating oil as they expand the exploitatoin of renewable energy in electricity production. In particular, deterioration and oxidation characteristics were jointly identified in R&D as an important influencing factor according to the content of saturated and unsaturated fatty acids present in vegetable oils and synthetic esters in power transformer applications.

• International journal of advanced smart convergence
• /
• v.6 no.2
• /
• pp.51-58
• /
• 2017

Recently, rapid advances of Ethernet and IP technology have brought many changes in the sound industry. In addition, due to AoIP-based audio transmission technology, various problems of the acoustic system (sound quality deterioration due to long distance transmission, complicated wiring) have improved dramatically. However, when many distributed audio systems are connected with AoIP equipment, if there is a problem in the equipment, it is impossible to operate the connected system. AoIP equipment only can transmit audio signals but cannot adjust the system for acoustic environment. In this paper, AoIP equipment is to be installed with sound equipment on a one-to-one basis, so that various existing problems can be solved and adjustment of sound quality (reverberation, echo, delay and EQ) can be possible by AoIP-based OAC (On-site Audio Center) with built-in DSP function. As a result, uncompressed real-time transmission by distributed transmission/receipt module in OAC (On-site Audio Center) and high quality sound by adjustment of sound quality with built-in DSP can be acquired. It is expected that OAC based sound system will be the industry standard in ubiquitous environment.

• Journal of Environmental Impact Assessment
• /
• v.19 no.1
• /
• pp.15-28
• /
• 2010

Because deterioration of air quality and urban heat island directly harm health of citizens, Health Impact Assessment (HIA) and Environmental Impact Assessment (EIA) for urban development projects needs to conduct analysis of their impacts objectively. This study aims to review appropriate methods for assessment of air quality used at each stage of urban development and to investigate prediction and assessment methods of urban heat island. In addition, by evaluating impacts of climate change following supposed urban construction performed in the central area of Korea on public health, it examines usefulness of HIA for urban construction. When urban heat island prediction and HIA method suggested in this study are applied to an imaginary city, they predict urban heat island properly and the impacts of climate changes on public health inside the city could be determined clearly by calculating life-climate index and bio-climate index related with thermal environment from the model.

• Journal of the Korea Furniture Society
• /
• v.26 no.4
• /
• pp.428-434
• /
• 2015

In this study, we received each wood plastic composites (WPC) from three manufacturers. These WPCs were evaluated regarding their physical and mechanical properties of both before and after accelerated weathering by ultraviolet (UV) irradiation. The total time of exposure of the WPCs to UV irradiation was 1800 h. The water absorption, volumetric swelling and shrinkage of WPCs did not affected by UV irradiation. Among the mechanical properties, there was no significant differences in bending strength and screw withdrawal resistance of UV treated WPCs compared with those of reference WPCs. However, surface hardness of WPCs showed decrease under UV irradiation. Stereoscopic microscopy observation revealed deterioration of the surface layer polymer in all weathered WPCs by UV. Exposure of the WPCs to UV irradiation caused decomposition and disappearance of the polymer layer. From this result, we can estimate that damage of polymer by UV led to a decrease in the surface hardness of the WPCs. The wood flours retained original shape after accelerated weathering by UV irradiation.

• Mycobiology
• /
• v.50 no.5
• /
• pp.345-356
• /
• 2022

The fungal distribution, diversity, and load were analyzed in the geographically segregated island groundwater systems in Korea. A total of 79 fungal isolates were secured from seven islands and identified based on the internal transcribed spacer (ITS) sequences. They belonged to three phyla (Ascomycota, Basidiomycota, and Chlorophyta), five classes, sixteen orders, twenty-two families, and thirty-one genera. The dominant phylum was Ascomycota (91.1%), with most fungi belonging to the Cladosporium (21.5%), Aspergillus (15.2%), and Stachybotrys (8.9%) genera. Cladosporium showed higher dominance and diversity, being widely distributed throughout the geographically segregated groundwater systems. Based on the diversity indices, the genera richness (4.821) and diversity (2.550) were the highest in the groundwater system of the largest scale. As turbidity (0.064-0.462) increased, the overall fungal count increased and the residual chlorine (0.089-0.308) had low relevance compared with the total count and fungal diversity. Cladosporium showed normal mycelial growth in de-chlorinated sterilized samples. Overall, if turbidity increases under higher fungal diversity, bio-deterioration in groundwater-supplying facilities and public health problems could be intensified, regardless of chlorine treatment. In addition to fungal indicators and analyzing methods, physical hydrostatic treatment is necessary for monitoring and controlling fungal contamination.

• Korean Journal of Food Science and Technology
• /
• v.41 no.4
• /
• pp.374-379
• /
• 2009

In this study, we investigated effects of different packaging materials and methods on physico-characteristics of green pumpkin during storage at $10^{\circ}C$. Whole green pumpkin samples were packaged with polyvinyl chloride film (PVCF), orange coating film (OCF), paraffin film (PF), or paper with paraffin film (PWPF) and stored at $10^{\circ}C$. Weight loss, pH, firmness, browning, and gas composition ($O_2$ and $CO_2$) inside the film packages were evaluated. All characteristics of the unpackaged group (control group, CON) changed rapidly and lost marketability as compared with the packed pumpkin group. The pH values in all of the green pumpkin samples were between 6.38 and 6.67, and decreased with increased storage time. Over the storage time, all packaged pumpkin groups evidenced prevented or retarded deterioration of the green pumpkin samples in terms of appearance, texture, and discoloration. Firmness decreased slightly with increased storage time. Brown color difference were much higher in the controls than in the film-packaged green pumpkin samples, and increased rapidly in the early stages of storage. These results were attributed to reduce respiration rates as a result of elevated carbon dioxide and reduced oxygen levels in the packages. The results of this study demonstrated that the green pumpkin packaged with PWPF and PVCF showed retarded deterioration as compared to the CON, OCF and PF samples in a controlled atmosphere, and thus significant differences were noted according to the packaging material and methods used.

• Journal of Life Science
• /
• v.25 no.2
• /
• pp.237-242
• /
• 2015

The use of calcite-forming bacteria (CFB) in crack remediation and durability improvements in construction materials creates a permanent and environmentally-friendly material. Therefore, research into this type of application is stimulating interdisciplinary studies between microbiology and architectural engineering. However, the mechanisms giving rise to these materials are dependent on calcite precipitation by the metabolism of the CFB, which raises concerns about possible hazards to cement-based construction due to microbial metabolic acid production. The aim of this study was to determine target microorganisms that possibly can have bio-corrosive effects on cement mortar and to assess multi-functional CFBs for their safe application to cement structures. The chalky test was first used to evaluate the $CaCO_3$ solubilization feature of construction sites by fungi, yeast, bacterial strains. Not all bacterial strains are able to solubilize $CaCO_3$, but C. sphaerospermum KNUC253 or P. prolifica KNUC263 showed $CaCO_3$ solubilization activity. Therefore, these two strains were identified as target microorganisms that require control in cement structures. The registered patented strains Bacillus aryabhatti KNUC205, Arthrobacter nicotianae KNUC2100, B. thuringiensis KNUC2103 and Stenotrophomonas maltophilia KNUC2106, reported as multifunctional CFB (fungal growth inhibition, crack remediation, and water permeability reduction of cement surfaces) and isolated from Dokdo or construction site were unable to solubilize $CaCO_3$. Notably, B. aryabhatti KNUC205 and A. nicotianae KNUC2100 could not hydrolyze cellulose or protein, which can be the major constituent macromolecules of internal materials for buildings. These results show that several reported multi-functional CFB can be applied to cement structures or diverse building environments without corrosive or bio-deteriorative risks.

• Journal of Environmental Science International
• /
• v.26 no.2
• /
• pp.231-238
• /
• 2017

Rapid industrial development has led to a serious problem of pollution in the industrial sector. With the increasing social need for environmental protection, research on air pollution prevention equipment for reducing pollutants in industrial processes is actively being undertaken. The deterioration of existent, installed facilities, their increased emission rates, and the strengthening of the effluent quality standards make complying with permissible emission standards difficult. In fact, installing new electric precipitators or complementing existent facilities is inevitable. The expansion and complementation of the installed electrical precipitators have led to improvements in dust collection efficiency, shorter working times, and lower costs. Because of its easy installation and simple manufacturing process, the production method with the discharge electrode of an electric precipitator is widely used. The following conclusions were reached by classifying discharge electrodes into four types based on the production method and mutually comparing them by their dust collection efficiency. None of the four types used in this study were damaged by impact. However, we were able to confirm some strain from the compression sites of both type A and type B. Both type B and type C are expected to have greater dust collection efficiencies than the other models due to their large vibration transmissibility. Moreover, the high vibrational energy is expected to cause rapping damage during its operation. Particularly, in the case of type B, some of the strain was found at the end of the compression site. The coupling schemes of both type C and type D are out of vibration transmissibility. On the other hand, the ability to maintain straightness and solidity of the side is regarded as outstanding and stable. Type D has outstanding on-site workability, considering the presence of locking, structural stability, and work conditions. From these experiments, we determined that type C is the most ideal connection method of discharge electrode, considering its construction period of renovation. Type C is inferior to type D with regard to on-site workability. However, type C has outstanding dedusting transmission with regard to the straightness, solidity maintenance, and vibration of shearing stress.