• Journal of Hydrogen and New Energy
• /
• v.25 no.1
• /
• pp.11-18
• /
• 2014

This study was conducted to investigate the effect of thermal pre-treatment on bio-hydrogen from food waste. Two continuous reactors operated and VFAs(volatile fatty acids) production and microbial communities were analyzed. The average hydrogen yield was 0.50 and 0.33mol $H_2/mol$ $hexose_{added}$ in thermally treated food added reactor(R1) and control(R2), respectively. Butyrate concentration was similarly 7,500mg/L in both reactors, but two times higher lactate concentration was observed in R2(3,800mg/L). The results of FISH(fluorescence in situ hybridization) showed that the relative microorganism to hydrogen producing bacteria was 78 and 27% in R1 and R2, respectively.

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.445-450
• /
• 2005

Hyaluronic acid-based beads were prepared in order to develop a biomedical material for augumentation. Hyaluronic acid was crosslinked by 1,3-butadiene diepoxide in a suspension state maintained by rapid mixing of soybeen oil and hyaluronic acid solution. The particle size, surface area and swelling ratio were measured to investigate the physical properties of the synthesized beads and the bead surface was examined by scanning electron microscopy. The beads were formed in the range of $5-12vol\%$ concentration of crosslinking agent, which showed monodisperse size distribution. Both BET surface area and swelling ratio decreased as the concentration of either hyaluronic acid or crosslinking agent increased, and crosslinking temperature decreased. Bead size could be effectively controlled by mixing speed without affecting other physical property.

• Journal of Soil and Groundwater Environment
• /
• v.29 no.3
• /
• pp.14-22
• /
• 2024

This study established risk-based fluoride soil contamination standards according to the Korean Soil Contaminant Risk Assessment Guidelines (SRAG). Ten exposure scenarios were evaluated, broadly categorized into Scenario 1, which used the default parameters from the current SRAG, and Scenario 2, which used the latest exposure factors and bio-concentration factors. Fluoride soil standards corresponding to a total hazard index (HI) of 1.0 were determined for each scenario. For children in agricultural areas, the derived risk-based soil fluoride standard was 70 mg/kg for Scenario 1 and 27 mg/kg for Scenario 2. In industrial areas, the risk-based fluoride soil standard was 2200 mg/kg in Scenario 1 and 2300 mg/kg in Scenario 2. This study clearly demonstrated that the crop ingestion exposure pathway exerted predominent influence on the estimated human health risk standards. Additionally, using the Added Risk Approach and considering soil background concentrations, the total fluoride soil standards for residential areas ranged from 232 mg/kg to 444 mg/kg, while the standards for industrial areas ranged from 2405 mg/kg to 2674 mg/kg.

• Particle and aerosol research
• /
• v.10 no.2
• /
• pp.83-91
• /
• 2014

Since airborne bacteria have been known to aggravate indoor air quality, studies on reducing bacteria particles increase recently. In this study, a chamber(0.8m x 0.8m x 1.56m) system was built in order to simulate real conditions for reducing airborne bacteria, and evaluated by a simple aerosol reduction test. A method utilizing CFD(Computational Fluid Dynamics) simulation was used to detect the horizontal cross-sectional area which represents particle distribution in the chamber. Then an air-cleaner with HEPA filter and Carbon Fiber Ionizer was located on that area for aerosol reduction test. The CFD result found the area was located at 0.2m height from the bottom of the chamber, and the test showed aerosol reduction efficiencies using measurements of number concentration and CFU(colony forming unit) per each case. At the measurement of number concentration, the reduction efficiency of air-cleaner with filter and ionizer(Case 3) was about 90% after 4 minutes from the stop of the bacteria injection, and that with only filter(Case 2) was about 90% after 8 minutes from the beginning. Lastly, that without filter and ionizer(Case 1) was about 30% after 10 minutes. At the measurement of CFU, it shows similar results but it is related to viability of bio-aerosol.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.6
• /
• pp.62-72
• /
• 2015

This study investigates the in-situ implementation of bio-regenerated iron mineral catalyst to remove explosive compounds in ground water at a military shooting range in operation. A bio-regenerated iron mineral catalyst was synthesized using lepidocrocite (iron-bearing soil mineral), iron-reducing bacteria Shewanella putrefaciens CN32, and electron mediator (riboflavin) in the culture medium. This catalyst was then injected periodically in the ground to build a redox active zone acting like permeable reactive barrier through injection wells constructed at a live fire military shooting range. Ground water and core soils were sampled periodically for analysis of explosive compounds, mainly RDX and its metabolites, along with toxicity analysis and REDOX potential measurement. Results suggested that a redox active zone was formed in the subsurface in which contaminated ground water flows through. Concentration of RDX as well as toxicity (% inhibition) of ground water decreased in the downstream compared to those in the upstream while concentration of RDX reduction products increased in the downstream.

• Korean Journal of Medicinal Crop Science
• /
• v.28 no.1
• /
• pp.29-37
• /
• 2020

Background: Although Gastrodia elata contains the valuable, bio-active compounds gastrodin and 4-hydroxybenzyl alcohol (4-HBA), it also contain ρ-cresol, which is a major source of an objectionable pig slurry-like odor. Accordingly, this study was performed to determine the deodorization effect of Diaion HP-20 resin on a G. elata extract. Methods and Results: Using Diaion HP-20 with an increasing concentration of ethanol, an extract of G. elata was fractionated into 15 fractions, which were anlayzed to determine their concentrations of active compounds and ρ-cresol. The gastrodin, 4-HBA, total phenolics, and ρ-cresol concentrations of the G. elata extract were 403.13, 408.15, 2,476.09, and 11.77 ㎍/㎖, respectively. Among the different fractions, gastrodin and 4-HBA were detected in fractions 3 to- 6, and 4 to- 10, respectively whereas total phenolics were detected in all samples, with fractions 5 to- 7 being characterized by higher concentrations than were the other fractions. ρ-Cresol was detected in fractions 12 to- 15, at concentrations ranging from 0.39 ㎍/㎖ to 6.05 ㎍/㎖ with the highest concentration detected in fraction 14. The fractions containing ρ-cresol could be selectively separated from the G. elata extract without the loss of major bio-active compounds such as gastrodin and 4-HBA. Conclusions: The results of this study indicate that a deodorizing method using Diaion HP-20 resin can be considered for improving the sensory qualities of G. elata extract without a loss of the major bio-active compounds.

• Korean Journal of Agricultural Science
• /
• v.40 no.4
• /
• pp.395-403
• /
• 2013

Plant factory has drawn attention in many countries in the world due to capability of environmental control not only for better yield and quality, but also for increase in functional and medicinal components of the products. In this paper, an experimental plant factory was constructed for various tests under different environmental conditions, and the operations were evaluated. A production room was constructed with adiabatic materials with dimensions of $6,900{\times}3,000{\times}2,500$ mm ($L{\times}W{\times}H$). Four sets of $2,890{\times}600{\times}2,320$ mm ($L{\times}W{\times}H$) production frame unit, each with 9 light-installed beds and an aeroponic fertigation system, resulting in 36 beds, were prepared. Accuracy and response were evaluated for each environmental control component with and without crops. Air temperature, humidity, $CO_2$ concentration, light intensity, frequency, and duty ratio, fertigation rate and scheduling were controllable from a main control computer through wireless communication devices. When the plant factory was operated without crop condition, the response times were 8 minutes for change in temperature from 20 to $15^{\circ}C$ and 20 minutes from 15 to $20^{\circ}C$; 7 minutes for change in humidity from 40 to 65%; and 4 minutes for change in $CO_2$ concentration from 450 to 1000 ppm. When operated for 24 hours with crop cultivation; average, maximum, and minimum values of temperatures were 20.06, 20.8, and $18.8^{\circ}C$; humidity were 66.72, 69.37, and 63.73%; $CO_2$ concentrations were 1017, 1168, and 911 ppm, respectively. Photosynthetic Photon Flux Density was increased as the distance from the light source decreased, but variability was greater at shorter distances. Results of the study would provide useful information for efficient application of the plant factory and to investigate the optimum environment for crop growth through various experiments.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.6
• /
• pp.864-873
• /
• 2013

In developing countries, biogas energy production is seen as a technology that can provide clean energy in poor regions and reduce pollution caused by animal manure. Laboratories in these countries have little access to advanced gas measuring equipment, which may limit research aimed at improving local adapted biogas production. They may also be unable to produce valid estimates of an international standard that can be used for articles published in international peer-reviewed science journals. This study tested and validated methods for measuring total biogas and methane ($CH_4$) production using batch fermentation and for characterizing the biomass. The biochemical methane potential (BMP) ($CH_4$ NL $kg^{-1}$ VS) of pig manure, cow manure and cellulose determined with the Moller and VDI methods was not significantly different in this test (p>0.05). The biodegradability using a ratio of BMP and theoretical BMP (TBMP) was slightly higher using the Hansen method, but differences were not significant. Degradation rate assessed by methane formation rate showed wide variation within the batch method tested. The first-order kinetics constant k for the cumulative methane production curve was highest when two animal manures were fermented using the VDI 4630 method, indicating that this method was able to reach steady conditions in a shorter time, reducing fermentation duration. In precision tests, the repeatability of the relative standard deviation (RSDr) for all batch methods was very low (4.8 to 8.1%), while the reproducibility of the relative standard deviation (RSDR) varied widely, from 7.3 to 19.8%. In determination of biomethane concentration, the values obtained using the liquid replacement method (LRM) were comparable to those obtained using gas chromatography (GC). This indicates that the LRM method could be used to determine biomethane concentration in biogas in laboratories with limited access to GC.

• Journal of Korean Society of Rural Planning
• /
• v.19 no.4
• /
• pp.137-147
• /
• 2013

Most of livestock houses are concentrated in certain area with mass rearing system resulting in rapid spread of infectious diseases such as HPAI (highly pathogenic avian influenza). The livestock-related vehicles which frequently travel between farms could be a major factor for disease spread by means of transmission of airborne aerosol including pathogens. This study was focused on the quantitative measurement of aerosol concentration by field experiment while vehicles were passing through the road. The TSP (total suspended particle) and PM10 (particle matter) were measured using air sampler with teflon filter installed downward the road with consideration of weather forecast and the direction of road. And aerosol spectrometer and video recorders were also used to measure the real-time distribution of aerosol concentration by its size. The results showed that PM2.5 was not considerable for transmission of airborne aerosol from the livestock-related vehicle. The mass generated from the road during the vehicle movement was measured and calculated to 241.4 ${\mu}g/m^3$ by means of the difference between TSP and PM2.5. The dispersion distance was predicted by 79.6 m from the trend curve.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.3
• /
• pp.242-250
• /
• 2016

Veterinary antibiotics (VAs) has been used to treat animal disease and to increase animal weight as growth promoter. However, abused usage of VAs can cause production of antibiotic resistance genes (ARGs) in the environment and additionally, residual of VAs in soil can be transferred into crops. Therefore, main objective of this research was to examine bioaccumulation of VAs in sprouts (red cabbage, Brassica Olearacea L. var. Capitata f. rubra and red radish, Raphanus sativus) with hydroponic method. Total of 7 VAs in 2 different classes of VAs (tetracyclcines: tetracycline, oxytetracycline, chlortetracycline, sulfonamides: sulfamethoxazole, sulfamethazine, sulfamethiazole, macrolides: tylosin) were evaluated and experiment was conducted with solid phase extraction (SPE)/high performance liquid chromatography tandem mass spectrometry (HPLC/MS/MS). Initial spiked concentration of 7 VAs was $5mg\;L^{-1}$ and cultivation period was 8 days. Result showed that growth of sprouts was inhibited about 23-27% when VAs was introduced. Amount of bioaccumulated VAs was also differed depending on class of VAs. The highest amount of bioaccmulated VAs was tetracycline and sulfamethoxazole in each class with a concentration of 4.05, $7.73mg\;kg^{-1}$ respectively. Calculated transfer ratio of VAs into crops was also ranged 0.38-54.27%. Overall, bioaccumulation of VAs in crops can be varied depending on crop species and class of VAs. However, further research should be conducted to verify bioaccumulation of VAs in crops in the soil environment.