• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.4
• /
• pp.519-534
• /
• 2019

When the fresh water from the artificial lakes (Ganwolho and Bunamho) were discharged to Cheonsu Bay in summer to prevent the flood over the reclaimed farmland near the lakes, the impact on water qualities (nutrients, organic matters, trace metals) within the bay was investigated through four surveys (June, July, August and October, 2011). Dissolved inorganic nitrogen (DIN) increased about as much as 3-4 times over the whole water column when the freshwater was discharged. And the main species composition of DIN changed from ammonia to nitrate. Dissolved inorganic phosphorus (DIP) decreased as much as 2 times in surface waters, but increased as much as 1.5 times in deep waters, and also silicate concentrations increased as much as 3-4 times in deep waters of the inner bay. The N/P ratios in Chunsu bay seawaters were much higher (2 to 7 times) than the Redfield ratio when the freshwaters were discharged, which indicated the phosphorus limiting in the phytoplankton growth. Dissolved organic carbon (DOC) and nitrogen (DON) increased as much as about 2 times. In addition, particulate organic matters (POC, PON, POP, Bio-Si) increased as much as above 2 times in the surface waters of the inner bay. Trace metals (Fe, Mn, Co, Ni, Cu) increased in the surface waters of the inner bay, but dissolved Cd concentrations decreased as much as 2 times. Therefore, when the contaminated fresh waters from the artificial lakes were discharged into the bay, nutrients, organic matters and trace metals generally increased compared to normal period. Since the phytoplankton bloom occurred in the surface waters of the inner bay, dissolved oxygens at the surface waters were oversaturated and hence hypoxic in the deep waters. Highly enriched nutrients concentrations were found in deep waters of the inner bay, which was accompanied with the hypoxic condition. Finally, the water quality in the inner bay of the Chunsu bay was deteriorated from less than grade 3 in normal periods to grade 5 when the freshwaters from the artificial lakes were discharged in summer.

• Journal of Bio-Environment Control
• /
• v.16 no.4
• /
• pp.275-283
• /
• 2007

This study was carried out to: (1) analyze structural stability of representative rain-sheltering greenhouses for large-grain grapevine cultivation with widths of 3.6 m and 5 m in case of using the existing pipe for agriculture; (2) present the optimum specification of pipes in the greenhouse with a width of 5 m under the condition of using the pipe of which ultimate strength has been above $400N{\cdot}mm^{-2}$; (3) evaluate stability and also present the optimum specification of pipes as eaves height was augmented. The above analyses were done for greenhouses with roof vents and also with a main-column interval of 3 m and a rafter interval of 60 cm. First, the existing 3.6 m greenhouse with a rafter of ${\Phi}25.4{\times}1.5t@600$ was stable far a snow-depth of 35 cm but unstable for a wind velocity of $35m{\cdot}s^{-1}$. Meanwhile the existing 5 m greenhouse with the same rafter was not stable for a wind velocity of $335m{\cdot}s^{-1}$ as well as a snow-depth of 35 cm. This meant that existing greenhouses had to be reinforced to secure stability. Second, the specification of pipes, especially rafter, could be classified as two cases. One had a structural stability at a safe wind velocity of $35m{\cdot}s^{-1}$ and a safe snow-depth of 40 cm for which stability the rafter had to be ${\Phi}31.8{\times}1.5t@600$, and the other had a stability at $30m{\cdot}s^{-1}-35cm$ at the specification of rafter ${\Phi}25.4{\times}1.5t@600$. Finally, eaves height had a significant effect on safe wind velocity. But it had little influence on safe snow-depth. The results showed that the specification of side-wall pipes had to be reinforced for the safe side velocity accord-ing to the increment of eaves height and similarly the specification of fore-end post far the safe fore-end velocity.

• Korean Journal of Clinical Laboratory Science
• /
• v.49 no.4
• /
• pp.390-394
• /
• 2017

Unexpected antibody screening and identification tests are highly important in the prevention of hemolytic transfusion reactions. Therefore, it is highly recommended to perform unexpected antibody screening test in all transfusion candidates. Here, the frequency and distribution of unexpected antibodies identified in Jeju for the past 3 years were evaluated. Between Jan 2014 and Dec 2016, unexpected antibody screening test was performed for 10,360 sera of transfusion candidates in Jeju general hospital using a column agglutination method with the Ortho BioVue system (Ortho-clinical Diagnostics, Raritan, NJ, USA). Eighty-seven (0.84%) of 10,360 cases that underwent unexpected antibiotics screening showed positive results. Among them, unexpected antibodies were identified in 41 cases (0.40%). Unidentified antibodies were detected in 8 cases (19.51%) and autoantibodies were detected in 3 cases (7.32%). The anti-E antibody included in warm antibodies were detected most frequently in 8 cases (19.51%); 6 cases (14.63%) of anti-E + anti-c antibody and 3 cases (7.32%) of $anti-Le^a+anti-Le^b$. $Anti-Le^a$ and $anti-Le^b$ antibodies were detected in 2 cases (4.88%), respectively. The anti-D, $anti-Di^a$, $anti-Fy^b$, $anti-Jk^a$, $anti-Jk^b$, anti-M and anti-P1 were detected in 1 case (2.44%). Complex antibodies were detected in 1 case (2.44%) in anti-C+anti-D and anti-E+anti-c+$anti-Jk^b$, respectively. In this study, we analyzed the frequency and distribution of unexpected antibodies in one general hospital for the past 3 years. However, there has been a general increase in multicultural families and foreign workers in Jeju, and it would be a meaningful study to compare the frequency and distribution of unexpected antibodies.

• Korean Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.263-270
• /
• 2010

This is a research on development of water purification equipment called artificial floating island (=AFI) for the stagnant water area which can secure exuberant landscape and water-friendility. The equipment devised in this study is designed to make up the weakness of conventional AFIs and improves the removal efficiency of pollutants using the mixture of media and plants. The air compressor positioned at the inlet releases air with inflow continuously, the water pump at the outlet sprays as a form of fountain with causing a disturbance on stable water column, then, both of them contribute improvement of water quality over a large area. We applied Bio-stone as a media in this system and performed an experiment of pre-efficiency test, and we concluded that the higher pollutants concentration of inflow, the higher removal efficiency we obtained. At the result of lab-scale experiment, in the case of high-concentration inflow, in the removal efficiency of SS is 62.2%, BOD is 50.2%, COD is 55.1%, T-N is 31.6%, T-P is 38.4%. In addition, to evaluate the field application, we set up the facilities in Sin-gal lake located in Yongin-Si Gyeonggi-Do, and researched on the removal efficiency of outflow relative to the inflow. As a result, SS is 53.5%, BOD is 32.8%, COD is 36.9%, T-N is 22.6%, T-N is 33.2%.

• Journal of Food Hygiene and Safety
• /
• v.38 no.5
• /
• pp.390-401
• /
• 2023

Major components of lac coloring include laccaic acids A, B, C, and E. The Korean Food Additive Code regulates the use of lac coloring and prohibits its use in ten types of food products including natural food products. Since no commercial standards are available for laccaic acids A, B, C, and E, a standard for lac pigment itself was used to separate laccaic acids from the lac pigment molecule. A standard for each laccaic acid was then obtained by fractionation. To obtain pure lac pigment for use in food by High performance Liquid Chromatography Photo Diode Array (PDA), a C8 column yielded the best resolution among various tested columns and mobile phases. A qualitative analytical method using High Performance Liquid Chromatography (HPLC) Tandem Mass(LC-MS/MS) was developed. The conditions for fast and precise sample preparation begin with extraction using methanol and 0.3% ammonium phosphate, followed by concentration. The degree of precision observed for the analyses of ham, tomato juice and Red pepper paste was 0.3-13.1% (Relative Standard Deviation (RSD%)), degree of accuracy was 90.3-122.2% with r²=0.999 or above, and recovery rate was 91.6-114.9%. The limit of detection was 0.01-0.15 ㎍/mL, and the limits of quantitation ranged from 0.02 to 0.47 ㎍/mL. Lac pigment was not detected in 117 food products in the 10 food categories for which the use of lac pigment is banned. Multiple laccaic acids were detected in 105 food products in 6 food categories that are allowed to use lac color. Lac pigment concentrations range from 0.08 to 16.67 ㎍/mL.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.4
• /
• pp.291-298
• /
• 1984

The extracted hagfish (Eptatretus burgeri) flesh lipid was separated into following fractions by column chromatography on Bio-beads SX-2 and Sephadex LH-20 prior to gab chromatographic analysis of their fatty acid compositions: polar lipid, triglyceride and free fatty acid. The major fatty acids of total lipid and triglyceride in hagfish were $C_{16:0},\;C_{16:1},\;and\;C_{18:1}$. The ratio of $C_{18:0}/C_{18:1}$ in the total lipid and triglyceride of hagfish was 0.1. The polar lipid of the hagfish muscle was mainly composed of phosphatidyl choline ($65.5\%$) and phosphatidyl ethanolamine ($28.0\%$). The triglyceride obtained was fractionated into four fractions by HPLC on the basis of partition numbers. Both the fatty acid composition and triglyceride composition on the basis of the total carbon number in the acyl chains of the triglyceride were analysed by the GLC. From the information obtained on triglyceride compositions based on the total carbon number by GLC and the partition number by HPLC and fatty acid composition by GLC, the combination of fatty acid in each triglycerides was estimated. A computer was used for estimation of the fatty acid combination in the triglyceride because hagfish lipid triglyceride was composed of various kinds of fatty acids. Fortyfour kinds of triglyceride were estimated. The major triglycerides in hagfish flesh lipid were found to those of ($1{\times}C_{16:0},\;2{\times}C_{18:1};\;13.5\%$), ($1{\times}C_{16:0},\;1{\times}C_{18:0},\;1{\times}C_{18:1};\;7.2\%$), ($1{\times}C_{16:1},\;2{\times}C_{18:1};\;5.4\%$), ($2{\times}C_{16:0},\;1{\times}C_{22:5};\;5.2\%$), ($1{\times}C_{14:0},\;2{\times}C_{18:1};\;4.5\%$), ($2{\times}C_{18:1},\;1{\times}C_{22:5};\;3.6\%$), ($1{\times}C_{14:0},\;1{\times}C_{18:0},\;1{\times}C_{18:1};\;2.7\%$) and ($1{\times}C_{14:0},\;1{\times}C_{16:0},\;1{\times}C_{18:2};\;2.2\%$).

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.2 s.31
• /
• pp.59-66
• /
• 2004

This paper presents a novel fabrication process for a tapered hollow metallic microneedle array using backside exposure of SU-8, and analytic solutions of critical buckling of a tapered hollow microneedle. An SU-8 meta was formed on a Pyrex glass substrate and another SU-8 layer, which was spun on top of the SU-8 mesa, was exposed through the backside of the glass substrate. An array of SU-8 tapered pillar structures. with angles in the range of $3.1^{\circ}{\sim}5^{\circ}$ was formed on top of the SU-8 mesa. Conformal electrodeposition of metal was carried out followed by a mechanical polishing using a pianarizing polymeric layer. All organic layers were then removed to create a metallic hollow microneedle array with a fluidic reservoir on the backside. Both $200{\mu}m\;and\;400{\mu}m$ tall, 10 by 10 arrays of metallic microneedles with inner diameters of the tip in the range of $33.6{\sim}101\;{\mu}m$ and wall thickness of $10{\mu}m\;-\;20{\mu}m$ were fabricated. Analytic solutions of the critical buckling of arbitrary-angled truncated cone-shaped columns are also presented. It was found that a single $400{\mu}m$ tall hollow cylindrical microneedle made of electroplated nickel with a wall thickness of $20{\mu}m$, a tapered angle of $3.08^{\circ}$ and a tip inner diameter of $33.6{\mu}m$ has a critical buckling force of 1.8 N. This analytic solution can be used for square or rectangular cross-sectioned column structures with proper modifications.

• Food Science and Preservation
• /
• v.24 no.1
• /
• pp.93-99
• /
• 2017

Collagen synthesis is decreased and matrix metalloproteinase-1 (MMP-1) levels are increased in naturally aged human skin, and these alterations cause changes such as skin wrinkling and decreased elasticity. As a part of our ongoing search for bioactive ingredients, MMP-1 inhibitory and type-1 procollagen synthesis inducing activities of aqueous methanolic extract of manufactured gambir product from Uncaria gambir were investigated in in vitro bioassay systems. In addition, total phenolic contents were quantified using a spectrophotometric method. Among tested samples, 40% MeOH eluate from 80% methanolic extract of manufactured U. gambir using open column chromatography packed with Diaion HP-20 resin showed significant MMP-1 inhibitory activities with an $IC_{50}$ value of $15.6{\pm}1.3{\mu}g/mL$. Furthermore, type-1 procollagen synthesis promoting property of 40% MeOH eluate ($IC_{50}$ value; $6.9{\pm}0.7{\mu}g/mL$) from 80% methanolic extract of manufactured gambir was higher than other eluates. Additionally, the present investigation revealed that 40% MeOH eluate of manufactured gambir product contained a high level of total phenolic compounds. The result suggests a distinct relationship between anti-wrinkle activity and total phenolic contents, and manufactured gambir product could be considered a new effective source of natural bioactive ingredients. Systematic investigation of manufactured gambir product will be performed for further development of its biological properties.

• Journal of Genetic Medicine
• /
• v.4 no.1
• /
• pp.45-52
• /
• 2007

Purpose : A simple, rapid, and highly sensitive analytical method for Gb3 in plasma was developed without labor-ex tensive pre-treatment by electrospray ionization MS/ MS (ESI-MS/MS). Measurement of globotriaosy lceramide (Gb3, ceramide trihex oside) in plasma has clinical importance for monitoring after enzyme replacement therapy in Fabry disease patients. The disease is an X-linked lipid storage disorder that results from a deficiency of the enzyme ${\alpha}$-galactosidase A (${\alpha}$-Gal A). The lack of ${\alpha}$-Gal A causes an intracellular accumulation of glycosphingolipids, mainly Gb3. Methods : Only simple 50-fold dilution of plasma is necessary for the extraction and isolation of Gb3 in plasma. Gb3 in diluted plasma was dissolved in dioxane containing C17:0 Gb3 as an internal standard. After centrifugation it was directly injected and analyzed through guard column by in combination with multiple reaction monitoring mode of ESI-MS/MS. Results : Eight isoforms of Gb3 were completely resolved from plasma matrix. C16:0 Gb3 occupied 50% of total Gb3 as a major component in plasma. Linear relationship for Gb3 isoforms w as found in the range of 0.001-1.0 ${\mu}g$/mL. The limit of detection (S/N=3) was 0.001 ${\mu}g$/mL and limit of quantification was 0.01 ${\mu}g$/mL for C16:0 Gb3 with acceptable precision and accuracy. Correlation coefficient of calibration curves for 8 Gb3 isoforms ranged from 0.9678 to 0.9982. Conclusion : This quantitative method developed could be useful for rapid and sensitive 1st line Fabry disease screening, monitoring and/or diagnostic tool for Fabry disease.

• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.273-281
• /
• 2016

In this study, after carrying out a bending test that targeted the frames of plastic film greenhouse, the load-displacement relationship was analyzed to be used as basic data to develop greenhouse construction and maintenance guidelines. As a result, regardless of the shapes of the specimen, the yield and the maximum load increased as the size of the specimen increased. The displacement also showed the same pattern. A steel pipe showed lower yield and maximum load than a square pipe, and the displacement was large. In the steel pipe case, the displacement under the yield and maximum load was in the range of approximately 1.42-4.20mm and 5.80-24.13mm, respectively. In the square pipe case, the displacement under the yield and maximum load was in the range of approximately 1.62-3.00mm and 3.13-8.01mm, respectively. Further, a large difference was observed between the result of this test and the values calculated by a conventionally provided standard. In particular, not much difference was found from the result of this test in the case of a purlin member from the values provided by previous researches. However, a large difference was observed in the column or main rafter members. Furthermore, when a wide-span and venlo type, which is a glasshouse, was used as a target(h/100 and h/80), the displacement under the yield and maximum load was approximately 28.0mm and 35.0mm, respectively, which showed a large difference compared with the Netherlands standard(14.0mm) of a glasshouse. Further, in the main rafter case, a large difference was observed in the displacement limit according to the width(i.e., span) of the greenhouse where members are used. Therefore, because the displacement limit can vary depending on various factors such as type, form, and size of a greenhouse, we determined that studies or tests that consider these factors should be carried out to reflect them in the construction and maintenance of greenhouses.