• Bulletin of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.1415-1418
• /
• 2011

• Journal of Biosystems Engineering
• /
• v.39 no.3
• /
• pp.205-214
• /
• 2014

Purpose: Phytosanitary irradiation treatment can effectively control regulated pests while maintaining produce quality. The objective of this study was to establish the best irradiation treatment for mangosteen, a popular tropical fruit, using a Monte Carlo simulation. Methods: Magnetic resonance image (MRI) data were used to generate a 3-D geometry to simulate dose distributions in a mangosteen using a radiation transport code (MCNP5). Microsoft Excel with visual basic application (VBA) was used to divide the image data into seed, flesh, and rind. Radiation energies used for the simulation were 10 MeV (high-energy) and 1.35 MeV (low-energy) for the electron beam, 5 MeV for X-rays, and 1.25 MeV for gamma rays from Co-60. Results: At 5 MeV X-rays and 1.25 MeV gamma rays, all areas (seeds, flesh, and rind) were irradiated ranging from 0.3 ~ 0.7 kGy. The average doses decreased as the number of fruit increased. For a 10 MeV electron beam, the dose distribution was biased: the dose for the rind where the electrons entered was $0.45{\pm}0.03$ kGy and the other side was $0.24 {\pm}0.10$ kGy. Use of an electron kinetic energy absorber improved the dose distribution in mangosteens. For the 1.35 MeV electron beam, the dose was shown only in the rind on the irradiated side; no significant dose was found in the flesh or seeds. One rotation of the fruit while in front of the beam improved the dose distribution around the entire rind. Conclusion: These results are invaluable for determining the ideal irradiation conditions for phytosanitary irradiation treatment of tropical fruit.

• Journal of Biomedical Engineering Research
• /
• v.44 no.4
• /
• pp.225-241
• /
• 2023

The study empirically analyzed the differences in industry distribution and innovation activity performance in the metropolitan and non-metropolitan areas of Korea's bio companies, which are highlighted as future growth engines. The main innovation activities of the bio industry, which are focused on science and technology and expressed with high uncertainty, were analyzed, centering on human resources, technology cooperation, and investment promotion. As a result of the analysis, the biomedical industry in the metropolitan area was found to have a high proportion, and bio foods, bio-based chemicals, and energy industries in the non-metropolitan area, respectively. Moreover, the innovation activity performances differed between the two regions. In particular, the notable characteristics included human resources, investment promotion, and technical cooperation with medical institutions in the metropolitan area with a high proportion of biomedical industries, and technology personnel exchange and cooperation with private research institutions in the non-metropolitan area, which has a high proportion of bio foods, bio-based chemicals, and energy industries. This study is significant in that it is the first study to compare and analyze the performance of innovative activities based on the distribution of industries in the bio-industry, focusing on human resources, technology cooperation, and investment promotion. In addition, after investigating the distribution status and competitiveness of the domestic bio-industry by region, it will analyze the status and characteristics of the domestic bio-industry and present policy implications to implement relevant promotion policy more efficiently.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.10.1-10.1
• /
• 2011

Energy harvesting technologies converting external sources (such as thermal energy, vibration and mechanical energy from the nature sources of wind, waves or animal movements) into electrical energy is recently a highly demanding issue in the materials science community for making sustainable green environments. In particular, fabrication of usable nanogenerator attract the attention of many researchers because it can scavenge even the biomechanical energy inside the human body (such as heart beat, blood flow, muscle stretching, or eye blinking) by converging harvesting technology with implantable bio-devices. Herein, we describe procedure suitable for generating and printing a lead-free microstructured $BaTiO_3$ thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible $BaTiO_3$ thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of $BaTiO_3$ thin film nanogenerator and the integration of bio-eco-compatible ferroelectric materials may enable innovative opportunities for artificial skin and energy harvesting system.

• Elastomers and Composites
• /
• v.54 no.4
• /
• pp.279-285
• /
• 2019

Bio-based polyester polyols were synthesized using esterification with azelaic acid, sebacic acid, and 1,3-propanediol. Polyurethanes were prepared using chain extenders (1,4-Butanediol, 1,3-Propanediol, and isosorbide) and 4,4'-diphenylmethane diisocyanate with a mixing ratio of 1:1:1.1. Subsequently, the properties of the polymers prepared using the different chain extenders were compared. The synthesis of polyurethane was confirmed by FT-IR, TGA, and GPC. The mechanical properties (hardness, ball rebound, and tensile strength) of the materials were analyzed using shore A tester, taber abrasion, and UTM. heat, chemical, and water resistances of the prepared materials were measured by comparing the tensile strengths according to external changes.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.1
• /
• pp.109-114
• /
• 2006

The reformed bio-diesel fuel irradiated by the ultrasonic wave is applied to the diesel engine of common rail in common use recently. This study has the object to examine the properties of engine performance and discharged materials. The bio-diesel fuel is mixed and used with the diesel fuel in common use at the ratio of $20\%\;or\; 100\%$. The ultrasonic energy is irradiated to the individually mixed fuel in order to reform the fuel. This fuel is applied to the engine in this experiment. And It is compared and analyzed from the experimental results with two cases irradiating the ultrasonic wave and no irradiating.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.145-145
• /
• 2017

농작업 자세 중에서 중량물을 반복적으로 들고 내리는 자세는 요통과 같은 근골격계 질환의 유발행위로 분류된다. 이는 인간공학적 유해요인 평가도구에 의해 위험도 별로 정량화 할 수 있다. 이러한 평가방법은 농작업 자세를 개선하여 근골격계 질환을 예방할 수 있다는 측면에서 매우 중요하다. 그러나 기존의 작업자세 부하 평가방법들은 동적 자세를 평가하는데 있어 어려움이 있을 뿐 만 아니라 평가 과정에서 관찰자의 주관성이 개입 될 수 있다는 한계점을 갖고 있다. 이에 본 연구에서는 중량물을 들고 내리는 동적 자세에서 발생하는 부하를 Energy expenditure를 이용하여 평가할 수 있는 시스템을 개발하는 것이다. Energy expenditure는 체중, 성별 등과 같은 작업자 관련 변수와 중량물의 무게, 들어 올리는 높이, 빈도수 등과 같은 작업환경 관련 변수를 이용하여 최대 산소소비량을 예측하는 방법이다. 본 연구에서 제안하는 작업자 및 작업환경 관련 변수를 자동 측정하는 시스템은 초음파 거리측정 센서와 깔창 형태의 센서를 이용하여 구성하였다. 이를 통해 남성(6명), 여성(6명)을 대상으로 20kg의 중량물을 들고 내리는 동작에서 발생하는 Energy expenditure 값을 산출하였고, 산소소비량 측정 장비를 통해 획득된 최대 산소소비량($VO_2$)과 비교하여 검증하였다. 여성을 대상으로 한 Energy expenditure 값과 최대 산소소비량 간 상관관계는 0.984로 나타났으며, 남성의 경우에는 0.998로 높은 상관관계를 보였다. 이와 같은 에너지 대사율 평가시스템은 연속적이고 반복적인 실제 농작업 자세 부하를 동적인 상태에서 평가할 수 있을 뿐 만 아니라 산소소비량 측정기와 같은 추가적인 장비가 필요하지 않아 현장 적용성이 뛰어 날 것으로 기대된다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.2
• /
• pp.153-159
• /
• 2006

It is a serious task to the decommissioning of the uranium conversion plant that the demolition of the lagoon sludge. The main component of the sludge is ammonium nitrate and that is the very explosive material. Therefore, the bio-denitrification is a attractive process to remove the nitrate. In this work, some process variables was tested such as incubation temperature, nitrate concentration, electron donor, C/N ratio, seeding ratio, and pH with an anaerobic bacteria as Pseudomonas halodenitrificans. The results would be used as basic data to the continuous bio-denitrification process.

• Journal of Distribution Science
• /
• v.18 no.9
• /
• pp.67-75
• /
• 2020

Purpose: The purpose of this study is to enhance sales promotion efficiency for using solid refuse fuel facilities. Renewable energy technology using Solid Refuse Fuel (SRF) is an economic efficiency technology that recovers waste by burning various wastes. A survey on the pollutants discharged from the solid fuels facilities was investigated so that the SRF facilities could be expanded, distributed and reflected in the policy. Research design, data, and methodology: In this study, 9 business sites using SRF and Bio-SRF as main raw materials were investigated for 2 years. The characteristics of target business sites such as the type of fuel used, combustion method, combustion temperature, daily fuel consumption and environmental prevention facilities were studied. Results: The average pollution & ammonia concentration of Bio-SRF facilities was found to be 88.15% higher than that of SRF facilities. But the average acetaldehyde concentration of SRF facilities was found to be 88.15% higher than that of Bio-SRF facilities. Conclusions: The main issue is how much electric power generation using combustible materials affects air pollution. The waste recycling law provides the standard value according to the fuel property, but there is a considerable gap with the mixed fuel. Therefore, for efficient utilization of facilities using solid fuel products, additional research is needed to improve the distribution structure of exhaust pollutants is needed.

• Journal of Biomedical Engineering Research
• /
• v.29 no.5
• /
• pp.408-413
• /
• 2008

Human body has a complete left and right symmetry structure, and the left and right balance by Yin and Yang. When the balance is broken, the left and right Meridian becomes abnormal condition. Acupuncture is a kind of therapy to recover from energy unbalance of the left and right Meridian to a new balance condition. In the study, we observed the electric potential along the stomach meridian (ST) in order to verify the energy consensus phenomenon by transportation of bio-energy between operator and subject during acupuncture. The acupuncture effects on opposite meridian site were investigated by comparing the electric potentials between the right and left ST sites. Meridian electrical potentials (MEPs) between operator and subject were simultaneously generated during the acupuncture and the polarity of MEPs was opposite. The results might imply the bio-energy transportation between operator and subject. In addition, we observed three different patterns of MEPs on both ST sites which might represent the condition of the related meridians because meridians in the body are organically interconnected.