• 한국세라믹학회지
• /
• 제56권3호
• /
• pp.211-232
• /
• 2019

Porous ceramics are promising materials for a number of functional and structural applications that include thermal insulation, filters, bio-scaffolds for tissue engineering, and preforms for composite fabrication. These applications take advantage of the special characteristics of porous ceramics, such as low thermal mass, low thermal conductivity, high surface area, controlled permeability, and low density. In this review, we emphasize the direct foaming method, a simple and versatile approach that allows the fabrication of porous ceramics with tailored microstructure, along with distinctive properties. The wet foam stability is achieved under the controlled addition of amphiphiles to the colloidal suspension, which induce in situ hydrophobization, allowing the wet foam to resist coarsening and Ostwald ripening upon drying and sintering. Different components, like contact angle, adsorption free energy, air content, bubble size, and Laplace pressure, play vital roles in the stabilization of the particle stabilized wet foam to the porous ceramics. The mechanical behavior of the load-displacements curves of sintered samples was investigated using Herzian indentations testes. From the collected results, we found that microporous structures with pore sizes from 30 ㎛ to 570 ㎛ and the porosity within the range from 70% to 85%.

• 한국전기전자재료학회논문지
• /
• 제23권11호
• /
• pp.854-858
• /
• 2010

In this study, we have investigated the effects of Cr dopant on the sintering and electrical properties of ZnO-$Sb_2O_3$ (ZS) ceramics for varistor application. Spinel phases including $\alpha-$ and $\beta$-type was formed at ZS system and $\alpha$-spinel was stabilized by Cr doping in ZS system. Densification of ZS and ZSCr system was retarded to $1000^{\circ}C$ by the formation of spinel at $800^{\circ}C$. The morphology and its distribution of spinel phases in ZS system was homogeneous but disturbed by Cr doping. In ZSCr the densification of ZnO compared with ZS system was more retarded by low concentration of Zn interstitial defects induced by Cr doping in addition to the effect of spinel phase formation. The defects in each system were identified as attractive coulombic center (ZS: 0.13 eV, ZSCr: 0.12 eV) and singly charged oxygen vacancy $V_0^{\cdot}$ (ZSCr: 0.33 eV). In all ZS and ZSCr system have week varistor behavior by the formation of double Schottky barrier at grain boundary but its stability of barrier was very sensitive to sintering temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.744-747
• /
• 2004

[ $0.96[Bio_{0.5}(Na_{0.84}K_{0.16})_{0.5}TiO_3]+0.04SrTiO_3+0.3wt%Nb_2O_5+0.2wt%La_2O_3+xwt%MnO_2$ ], were studied in order to develope the superior dielectric and piezoelectric properties of Lead-free Piezoelectric ceramics. With increasing amount of $MnO_2$ addition, density showed the maximum value of $5.79[gcm^3$] at 0.1wt% $MnO_2$ addition, and electromechanical coupling factor($k_p$) and dielectric constant decreased, and mechanical quality factor($Q_m$) increased and showed the maximum value of 161 at 0.3wt% $MnO_2$ addition.

• The Korean Journal of Ceramics
• /
• 제6권3호
• /
• pp.214-218
• /
• 2000

Hydroxyapatite (HA) and $\beta$-tricalcium phosphate ($\beta$-TCP) are bio-compatible materials with bones and teeth. HA has been widely applied as bone substitutes because of chemical stability in vivo, while $\beta$-TCP has higher resorbability than HA when the material is implanted in a bone defect. In the present study, both HA and $\beta$-TCP porous ceramics were soaked in the simulated body fluid in order to investigate the reaction between the materials and the fluid. After the soaking test, carbonate hydroxyapatite was formed on HA surface at 1 week, and then the amount of precipitates increased with increasing period of the soaking test. While $\beta$-TCP was not dissolved in the fluid, carbonate hydroxyaopatite was also formed on $\beta$-TCP surface after 12 weeks, and the amount of precipitates was less than that on HA. In vitro behavior of HA was similar to that in vivo, but in vitro behavior of $\beta$-TCP was not similar to that in vivo.

• 오토저널
• /
• 제9권4호
• /
• pp.5-14
• /
• 1987

세라믹스는 내열성, 고온강도, 내creep성, 내식성, 내마모성이 우수하며 경량이라는 점등, 금속재료 나 유기고분자재료와 비교화여 구조재료로서 이용하기 위한 많은 우수한 성질을 구비하고 있다. 따라서 세라믹스를 고효율 열기관, 정밀기계 가공부품, 생체재료(Bio-ceramics) 등의 신분야 즉, 금속재료나 유기고 분자재료로는 기대할 수 없는 가혹한 사용조건하에서 구조재료로의 이용이 기 대되고 있으며 엔진부품, 치골재료, seal재 등 일부에서는 실용화 되고 있기도 한다. 그러나 세 라맥스재료는, 강도는 실온에서도 금속재료에 필적하는 것이 얻어지고 있으나 인성(toughness)이 낮고 깨지기 쉬우며 안정성 및 신뢰성이 결핍되어 있어 사용상 큰 문제점으로 되어있다. 따라서 세계선진각국에서는 세라믹재료의 신뢰성을 높이기 위해 세라믹스의 고강도, 고인성화에 관한 연구가 활발히 진행되고 있다. 필자는 세라미엔진부품에 이용되고 있거나 가까운 장래에 이용이 가능한 각종 부품들에 대해 소개하고 세라믹엔진의 실용화를 위한 최근의 연구동향을 정리하여 소개하고자 한다.

• 한국분말재료학회지
• /
• 제25권4호
• /
• pp.346-354
• /
• 2018

Over the last decade, the study of the synthesis of semiconductor colloidal quantum dots has progressed at a tremendous rate. Colloidal quantum dots, which possess unique spectral-luminescent characteristics, are of great interest in the development of novel materials and devices, which are promising for use in various fields. Several studies have been carried out on hot injection synthesis methods. However, these methods have been found to be unsuitable for large-capacity synthesis. Therefore, this review paper introduces synthesis methods other than the hot injection synthesis method, to synthesize quantum dots with excellent optical properties, through continuous synthesis and large capacity synthesis. In addition, examples of the application of synthesized colloid quantum dots in displays, solar cells, and bio industries are provided.

• 한국세라믹학회지
• /
• 제26권2호
• /
• pp.171-178
• /
• 1989

In order to develope hydroxyapatite ceramics which has mechanical strength as bio-implant materials and get the basic data for the study and application of biocompatibility, hydroxyapatite was synthesized at Ca/P=1.67~1.75, pH 7~11 by precipitation method. Using prepared powders, the sintered body, fluorine substituted body and the porous body was formed and their properties were investigated. The sample obtained in condition of Ca/P=1.67, pH 7 and sintering at 1,15$0^{\circ}C$ was decomposed to $\beta$-tricalcium phosphate, and co-existed with hydroxyapatite. Hydroxyapatite synthesized at pH 11 was not easily decomposed to $\beta$-tricalcium phosphate at sintering process. The substitution of a small amount of fluorine for hydroxyapatite prevented hydroxyapatite from being decompsed to $\beta$-tricalcium phosphate. Hydroxyapatite ceramics which substited of 10% fluorine was prepared at 1,15$0^{\circ}C$, and the valueof bending strength for this body were found to be 112MPa.

• 환경생물
• /
• 제35권4호
• /
• pp.662-669
• /
• 2017

본 연구는 축산지역 비점오염원 저감시설로서 바이오갈대와 바이오여재를 이용한 저영향개발(LID)공법이 적용된 처리수에 대한 생태독성 평가를 수행하였다. 식생수로와 인공습지를 이용한 유입식 파일럿 플랜트와 침투도랑을 이용한 회분식 파일럿 플랜트를 제작하여 축산폐수처리장 시료를 대상으로 생태독성 시험을 수행하였고 처리 전 후의 오염원 저감율과 생태독성도와의 연계성을 평가하였다. 각 파일럿 플랜트는 바이오갈대와 바이오여재를 이용한 바이오공정으로 제작하였으며 대조군으로 일반갈대와 일반여재를 이용한 일반공정을 제작하였다. 본 연구결과, 유입식과 회분식 파일럿 플랜트 모두 일반공정보다 바이오공정이 적용된 경우 유출수의 COD, TN 그리고 TP 저감 효율이 더 높았다. 또한 HRT 24시간 LID 공법을 적용 후 물벼룩 독성도는 상당히 낮아졌으며 특히 회분식 파일럿 플랜트가 독성저감에 효율적인 것으로 나타났다. 바이오갈대와 바이오세라믹 등으로 구성된 LID 공법은 비점오염원 저감시설뿐만 아니라 가축분뇨 정화시설과 연계한 후속처리공정으로 생태독성을 고려한 수질관리에 효과적일 것으로 예상되며 향후 오염원과 독성도를 동시에 저감할 수 있도록 LID 공법 최적화 연구가 필요할 것으로 판단된다.

• 한국세라믹학회지
• /
• 제42권8호
• /
• pp.554-560
• /
• 2005

The engineering ceramic needs the properties of high strength, hardness, corrosion-resistance and heat-resistance in order to withstand thermal shock or applied nonuniform stresses without failure. The densely coated porous ceramics can be used for machine component, electromagnetic component, bio-system component and energy-system component by their high-performances from superior coating properties and light-weight characteristics due to the structure including pore by itself. In this study we controlled the porosity of silica and alumina, $8.2\~25.4\%$ and $23.4\~36.0\%$, respectively, by the control of sintering temperature and starting powder size. We made bilayer structures, consisting of a transparent glass coating layer bonded to a thick substrate of different porous ceramics by a thin layer of epoxy adhesive, facilitated observations of crack initiation and propagation. The elastic modulus mismatch could be controlled using different porous ceramics as the substrate layer. Then we applied 150 N force using WC sphere with a radius of 3.18 mm by Hertzian indentation. As a result, the crack initiation in the coating layer was delayed at lower porosity in the substrate layer, and the damage in the coating layer was relatively smaller at the bilayer structure coated on higher elastic substrate.

• 구강회복응용과학지
• /
• 제30권1호
• /
• pp.81-92
• /
• 2014

상악 전치부에 임플란트를 이용해 심미적으로 수복 하는 것은 많은 어려움이 따른다. 이는 치조골 흡수와 치간 유두 수축 등과 같은 임플란트 주변 경, 연조직 문제와 금속지대주 및 금속도재관의 변연노출과 낮은 광투과도 등의 보철적 한계 때문이다. 이에 본 증례에서는 경, 연조직의 증대술 및 성형술, 발치 후 즉시 식립 등과 함께 임시수복물의 장기간 사용 및 수정으로 임플란트 주위 연조직의 형태와 건강을 형성한 후, 맞춤형 인상 코핑을 사용하여 이를 최종 모형에 재현하였다. 또한 맞춤형 지르코니아 지대주와 완전 도재관을 이용해 최종 수복함으로써 기능적이고 심미적인 결과를 얻었기에 이를 보고하고자 한다.